{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 0.3 Nm - 140 Nm
... Closed Loop Stepper Motor Driver Combination for AC and DC Power Supply Features Absolute sensor, position monitoring No external sensors necessary Low heat generation EtherCAT, EtherNet/IP, Profinet, Modbus ...
Oriental Motor
... Closed Loop Stepper Motor Driver Combination for AC and DC Power Supply AZ Series Connector Type Features Absolute sensor, position monitoring No external sensors necessary Low heat generation EtherCAT, EtherNet/IP, ...
Oriental Motor
... Closed Loop Stepper Motor Driver Combination for AC and DC Power Supply AZ Series Connector Type with Gear Features Absolute sensor, position monitoring No external sensors necessary Low heat generation EtherCAT, ...
Oriental Motor
Torque: 0.0003 Nm - 0.2 Nm
Diameter: 6 mm - 52 mm
... Stepper motors for demanding positioning tasks For demanding positioning tasks that require a high level of accuracy, stepper motors are generally used. The name comes from the operating ...
FAULHABER Drive Systems
Torque: 0.581 Nm
Diameter: 66 mm
Operating temperature: -30 °C - 70 °C
... its DM66200H series, FAULHABER is opening up a whole new dimension in performance for motors with internal opening (aperture). As a direct drive, the new hollow shaft motor operates backlash-free and can be integrated ...
FAULHABER Drive Systems
Intensity: 0.94 A - 4.6 A
Torque: 0.174, 0.45, 0.12, 0.4 Nm
Rotational speed: 10,000, 5,000 rad.min-1
... connections, the FAULHABER DM-Dynamic motors are redundant drive systems by design. They require only minimal installation space thanks to their short length in addition to their low weight. The DM-Dynamic stepper ...
FAULHABER Drive Systems
... This is a standard PM-type stepping
motor with an outer diameter of 25 mm.
In addition to its compact size, high torque, and long service life, it enables positioning via open-loop control.
Drive method: Bipolar constant current ...
Mabuchi Motor (Europe) GmbH
... This is a standard PM-type stepping
motor with an outer diameter of 35 mm.
In addition to its compact size, high torque, and long service life, it enables positioning via open-loop control.
Drive method: Bipolar constant current ...
Mabuchi Motor (Europe) GmbH
... This is a standard PM-type stepping
motor with an outer diameter of 42 mm.
In addition to its compact size, high torque, and long service life, it enables positioning via open-loop control.
Drive method: Bipolar constant current ...
Mabuchi Motor (Europe) GmbH
Torque: 0.005 Nm
Diameter: 14 mm
... The size 6 [14mm] Hollow Shaft Stepper Motor is the smallest hollow shaft motor from DINGS' It has Max. 0.005N·m of holding torque. For special windings or customization of shaft, please contact DINGS' ...
Power: 0.5 W - 5 W
Torque: 0.015 Nm - 0.3 Nm
Rotational speed: 0 rpm - 1,500 rpm
... DC Stepper Motors are a great choice for simple applications that require long durability and easy integration, like small HVAC systems, photocopy machines, plot- ters, medical pumps and drip feeders, ...
Torque: 4 Nm - 1,739 Nm
... hybrid stepper motors with the PMX motor family. Leveraging best practices from customer preferred products, the PMX series delivers a wider breadth of frame sizes and options in an affordable, low-cost ...
Kollmorgen Europe GmbH
Torque: 1.1 Nm - 9.5 Nm
... up new areas of use for stepper motors. Of course, stepper motor solutions also have their limitations. Particularly high speeds, easily achieved by servos, often mean the end of implementation ...
Diameter: 20 mm - 35 mm
... PM-type stepping motor is a linear type that can convert rotational motion into linear motion through the screw mechanism of the shaft and rotor. It retains the ease of control and high-precision positioning unique to stepping motors, ...
Minebea
Diameter: 20, 28 mm
... This range of linear stepper motors can be custom engineered to meet the integration requirements of the customer’s application. The platform motors below are typically used in the applications noted. ...
Intensity: 0.13 A
Torque: 0.0039 Nm
Diameter: 15.5 mm
... The smallest of our can stack stepper product line, the 15M020D provides .55 oz-in (3.87mNm) of holding torque in a 15mm frame size. It is optimal for low-torque positioning applications where size and/or weight is limited. Product ...
Portescap S.A.
Torque: 0.02 Nm - 110 Nm
Rotational speed: 0 rpm - 4,000 rpm
... controller or pulse input driver which substantially reduces heat generation from the motor through the use of high-efficiency technology. Requires αSTEP AZ Series Stepper Motor Driver. Customization ...
ORIENTAL MOTOR
Power: 0 W - 40 W
Intensity: 0 A - 3 A
Torque: 0.3 Nm
... Stepper motor with embedded drive and motion controller Stepper motor with an integrated freely programmable servo controller High dynamics and efficiency through field-oriented ...
Technosoft
Power: 40 W
Intensity: 3 A
Torque: 0 Nm - 0.3 Nm
... Stepper motor with embedded drive and motion controller Stepper motor with an integrated freely programmable servo controller High dynamics and efficiency through field-oriented ...
Technosoft
Power: 0 W - 50 W
Intensity: 0.3 A - 11 A
Torque: 0.01 Nm - 0.3 Nm
... Stepper motor with embedded drive and motion controller Stepper motor with an integrated freely programmable servo controller High dynamics and efficiency through field-oriented ...
Technosoft
... HUD Series Stepper Motor Advantage: Low cost Long life Performance Data Excitation method: Bipolar 1-2 Excitation Mutual resistance:220 Ω Stride angle: 5.625/64 Reduction Ratio: 1/64 Escape torque gf.cm(400PPS):850 No-load ...
Shenzhen Power Motor Industrial Co., Ltd.
Diameter: 25 mm
... HUD Series Stepper Motor Performance Data Excitation method: Bipolar 1-2 Excitation Mutual resistance:45 Ω Stride angle: 7.5° Reduction Ratio: 0.48mm Escape torque gf.cm(400PPS):0.01mm No-load continuous operating ...
Shenzhen Power Motor Industrial Co., Ltd.
Intensity: 1.3, 0.7, 1.2, 0.6 A
Torque: 0.085, 0.125 Nm
... Typical applications Household appliances; In-vehicle equipment Values describe a specific configuration. Voltage, torque, speed, current, power and shaft dimensions may vary with customer requirements. Confirm the exact specification and operating ...
Shenzhen Power Motor Industrial Co., Ltd.
... Overview
The three-phase open-loop
stepper
motor is designed for industrial motion control and is compatible with DP3L series high-voltage open-loop
stepper drivers (e.g., DP3L-11022A3). It ...
... Overview
Two-phase closed-loop
stepper
motor compatible with DP3F1 and DP3C series
stepper drivers, designed for industrial motion control applications that require improved low-speed torque ...
... open-loop stepper drivers
Related products
- Three-phase
Intensity: 0.3 A
Torque: 0.0001 Nm
Diameter: 10 mm
... 1011P0209 10mm Micro DC Step Motot Diameter：10mm Length ：11mm Voltage：5V Step Angle: 18° Detent Torque：0.1mNm Applications Office automation systems, medical equipment, mini household appliances, toys, etc. Options Lead ...
Intensity: 0.4 A
Torque: 0.0008 Nm
Diameter: 15 mm
... 1511P0209 15mm Micro Step Motot Diameter：15mm Length ：11mm Voltage：5V Step Angle: 18° Detent Torque：0.8mNm Applications Office automation systems, medical equipment, mini household appliances, toys, etc. Options Lead wires length Unit ...
Intensity: 0.18 A
Torque: 0.0005 Nm
Diameter: 35 mm
... 3515P0489 35mm Micro DC Step Motot Diameter：35mm Length ：15mm Voltage：24V Step Angle: 3.75° Detent Torque：5mNm Applications Office automation systems, medical equipment, mini household appliances, toys, etc. ...
Torque: 0.012, 0.018, 0.016, 0.03 Nm
... Step Angle Accuracy：±5% ( full step, no load ) Resistance Accuracy：±10% Inductance Accuracy：±20% Temperature Rise：80℃ max ( rated current, 2 phase on ) Ambient Temperature：-20℃ ~ +50℃ Insulation Resistance：100MΩ min, 500VDC Dielectric Strength：500VAC ...
3X MOTION TECHNOLOGIES CO.,LTD.
Torque: 0.034 Nm - 0.13 Nm
... GENERAL SPECIFICATION Step Angle Accuracy：±5% ( full step, no load ) Resistance Accuracy：±10% Inductance Accuracy：±20% Temperature Rise：80℃ max ( rated current, 2 phase on ) Ambient Temperature：-20℃ ~ +50℃ Insulation Resistance：100MΩ min, 500VDC Dielectric ...
3X MOTION TECHNOLOGIES CO.,LTD.
Torque: 0.25, 0.05, 0.08, 0.18 Nm
... GENERAL SPECIFICATION Step Angle Accuracy：±5% ( full step, no load ) Resistance Accuracy：±10% Inductance Accuracy：±20% Temperature Rise：80℃ max ( rated current, 2 phase on ) Ambient Temperature：-20℃ ~ +50℃ Insulation Resistance：100MΩ min, 500VDC Dielectric ...
3X MOTION TECHNOLOGIES CO.,LTD.
Torque: 1.1, 1.6, 2.9, 1.8, 3 Nm
Rotational speed: 1,000 rpm
... - 2.9Nm The QuickStep series of Stepper motors with integrated electronics represents a major step forward. All the necessary electronics in a stepper system are integrated in the motor ...
JVL A/S
Power: 260, 288, 315 W
Torque: 3 Nm - 10 Nm
... 12.0/10.0Nm The QuickStep series of Stepper motors with integrated electronics represents a major step forward. All the necessary electronics in a stepper system are integrated in the motor ...
JVL A/S
Torque: 25, 10 Nm
... The QuickStep series of Stepper motors with integrated electronics represents a major step forward. All the necessary electronics in a stepper system are integrated in the motor itself. The ...
JVL A/S
Intensity: 0.4 A
Torque: 0.226 Nm
Diameter: 5 mm
... Product Overview
The 39BH34-040A-JS16 is a compact NEMA 16 (39 mm) 4-phase hybrid
stepper
motor with an integrated JS16 planetary gearbox (1:10). It delivers 0.226 N·m holding torque at 0.4 A/phase. The integrated ...
NEOTON MOTOR
Intensity: 2.97 A
Torque: 2.747 Nm
Diameter: 8 mm
... Overview
The 57BHH100-420A-21B is a 57 mm (NEMA 23) 4-phase hybrid
stepper
motor delivering 2.747 N·m (28 kg·cm) of holding torque in a 100 mm body. With a rated current of 2.97 A/phase, it offers consistent ...
NEOTON MOTOR
Intensity: 4.2 A
Torque: 3.139 Nm
Diameter: 10 mm
... Product overview
The 57BHH110-422A-30D is a 57 mm (NEMA 23) 2-phase hybrid
stepper
motor providing 3.139 N·m (32 kg·cm) holding torque in a 110 mm body. Rated at 4.2 A/phase, it is suitable for precision motion ...
NEOTON MOTOR
... , simplifies motion control by incorporating a built-in controller and motor encoder. Capable of over 25,600 microsteps per revolution and up to 2650 rpm, this compact stepper motor includes a detachable ...
Torque: 0.017 Nm - 50 Nm
... new motors' line, suitable for many different purposes. ● Suitable for many different application fields ● Advanced construction solutions: √ up to 40% torque increase than standard motors with same winding ...
Ever Elettronica
Power: 12 W
Torque: 0.14 Nm
Diameter: 80 mm
... pancake stepper motor from Ametek. The series is suitable for applications that require accurate positioning with high torque and think packaging. It is offered at a maximum diameter of 80 mm and has thickness which measures ...
Haydon Kerk Pittman
... The 56D SERIES is a 2 phase hybrid stepping motor manufactured by Shinano. This device functions with a broad range of Nema sizes such as 11, 14, 16, 17, 23, and 34. It also has step angles of 0.9°, 1.8°, 3.6°, 3.75° and 11.25°. This ...
SHINANO KENSHI
Rotational speed: 20 rpm
... For large movements or when speed is required, the ProScan™III focus motor can be driven at speeds of up to 20 revs/s. Our coupling system uses a ring adaptor to match our motor to almost all microscope which have ...
Intensity: 0.6, 1.2, 2.5 A
Torque: 0.0038 Nm - 0.7 Nm
Operating temperature: -30 °C - 80 °C
... High precision stepper motor. Geometry and magnetisation optimised for smooth running Phytron ZSS stepper motors (19 - 56 mm) offer high precision combined with smooth running. With ...
Phytron GmbH
Torque: 0.0007 Nm - 19 Nm
... Main Specifications: Size: 14 mm square to 106 mm round (NEMA 42) - 10 frame sizes Resolution: 1.8° and 0.9°/ step Holding torque: 0.0065 to 19 Nm Winding: Unipolar and Bipolar models Single or Double shaft version Class B (130°C) & Class F (155°C) RoHS ...
SANYO DENKI EUROPE
Intensity: 0.5 A - 10 A
Torque: 78 Nm - 1,260 Nm
... Bimba’s family of DC stepper motors are available in NEMA 23 and NEMA 34 sizes and are designed to work optimally with Bimba DC Stepper Drives. With features that include ...
Rotational speed: 360, 600, 960 rpm
... closed loop stepper motor system offers accurate and precise position control through feedback from integrated encoders. The motors feature quick response rates for ideal short pitch drive. Gain tuning ...
Autonics
Intensity: 6 A
Torque: 4.6, 8.5 Nm
Operating temperature: -20 °C - 50 °C
... 1.8 °, 86mm, NAME 34, STD structure hybrid stepper motor ...
Changzhou Fulling Motor Co., Ltd
Intensity: 0.95, 1.1 A
Torque: 0.06 Nm - 1.9 Nm
Operating temperature: 0 °C - 85 °C
... closed-loop control The TSM11Q-1RM StepSERVO™ integrated motor is a drive+ motor unit, fusing NEMA 11 step motor and servo drive into a single device. Power to the drive, located at the rear of the ...
Applied Motion Products
Torque: 1.48 Nm
Rotational speed: 85 rad.sec-1
... The TP23 is a hybrid electric stepper motor manufactured by ElectroCraft. This device functions with a holding torque of up to 210 oz-in or 148 Ncm and speed up to 85 RPS. It is supplied with bi-directional ...
Electrocraft
Power: 7.68, 8, 4.5, 3.84, 9.6 W
Torque: 0.07, 0.09, 0.1 Nm
... Unipolar Drives Motor phase winding current is switched in only one direction (typically to ground). • Simple low cost drive circuit • Requires center tap winding • Low Output Torque • 6 & 8 lead motors Bipolar ...
Hurst
... Stepper motors Stepper motors translate electrical impulses into precise mechanical movements. The outstanding control features facilitate precise starting, stopping ...
MinebeaMitsumi Technology Center Europe GmbH
Torque: 0.014 Nm
Rotational speed: 8,000 rpm
... in the field of Hybrid Stepper Motor technology, we were able to succeed where many have failed. We’ve successfully created a NEMA 6 sized stepper motor that delivers plenty of performance. ...
Lin Engineering
Intensity: 0.4 A - 1 A
Torque: 0.04903 Nm - 0.13729 Nm
... Description
Open-loop two-phase stepper motor 35BYGH produced by Shanghai Siheng
Motor Manufacturing Co., Ltd. The product family comprises 6 models (35BYGH220-0404 to 35BYGH236-1004). ...
Shanghai Siheng Motor Co., Ltd
Torque: 0.09 Nm - 0.45 Nm
... NEMA 17 Stepper Motor 0.9 degree • Manufacturer Part Number: H422 • Motor Type: Bipolar Stepper Motor 4 Wires 2 Phase, Unipolar Stepper Motor ...
I.CH MOTION CO.,LTD
... two-phased bipolar electric stepper motors. This series consists of the NEMA 11, NEMA 17, NEMA 23 and the NEMA 34 model. They are installed with a connector and are capable of generating a maximum frequency ...
Arcus Technology
... M15SP-1N Stepping Motors (Ø15) [FEATURES] 1. Compact size, lightweight and high-output torque. 2. Superior running quietness. [USES] 1. Feeding of and printing on small printer paper. 2. Drive for all ...
... powered by electric motors. Velmex products are built motor-ready. Motors are an adder to the product. Customers may purchase the motors needed direct from Velmex or ...
Torque: 0.135, 0.18, 0.09 Nm
Diameter: 28 mm
... includes: •Brushless DC Motors •Brushless DC Servo Motors with Controller • Stepper Motors • Motor Controllers •Linear Actuators •Encoders •Gears •Custom ...
Nanotec Electronic GmbH & Co. KG
6 expert tips
Prioritize integrated closed-loop controllers to eliminate lost steps and reduce heat generation during high-intensity industrial production cycles.
Select motors with NEMA ratings matching existing mechanical interfaces to simplify integration and minimize specialized mounting hardware costs.
Verify winding insulation class and IP ratings to ensure reliable performance in harsh manufacturing environments with high temperatures.
Calculate required inertia ratios between the load and motor to prevent resonance issues that cause positioning errors.
Evaluate driver compatibility to ensure microstepping resolution meets the specific accuracy requirements of your precision metrology equipment.
Intensity: 0.35 A - 7.7 A
... the price level of a stepper. The stepIM significantly enhances the performance of the stepper motors, when compared to conventional open loop control. The integrated electronics control the stepper ...
the best suppliers