Rotational speed: 360, 600, 960 rpm
... closed loop stepper motor system offers accurate and precise position control through feedback from integrated encoders. The motors feature quick response rates for ideal short pitch drive. Gain tuning ...
Autonics
Intensity: 6 A
Torque: 4.6, 8.5 Nm
Operating temperature: -20 °C - 50 °C
... 1.8 °, 86mm, NAME 34, STD structure hybrid stepper motor ...
Changzhou Fulling Motor Co., Ltd
... two-phased bipolar electric stepper motors. This series consists of the NEMA 11, NEMA 17, NEMA 23 and the NEMA 34 model. They are installed with a connector and are capable of generating a maximum frequency ...
Arcus Technology
Intensity: 0.6, 1.2, 2.5 A
Torque: 0.0038 Nm - 0.7 Nm
Operating temperature: -30 °C - 80 °C
... High precision stepper motor. Geometry and magnetisation optimised for smooth running Phytron ZSS stepper motors (19 - 56 mm) offer high precision combined with smooth running. With ...
Phytron GmbH
Intensity: 0.95, 1.1 A
Torque: 0.06 Nm - 1.9 Nm
Operating temperature: 0 °C - 85 °C
... closed-loop control The TSM11Q-1RM StepSERVO™ integrated motor is a drive+ motor unit, fusing NEMA 11 step motor and servo drive into a single device. Power to the drive, located at the rear of the ...
Applied Motion Products
Torque: 1.48 Nm
Rotational speed: 85 rad.sec-1
... The TP23 is a hybrid electric stepper motor manufactured by ElectroCraft. This device functions with a holding torque of up to 210 oz-in or 148 Ncm and speed up to 85 RPS. It is supplied with bi-directional ...
Electrocraft
... - Available in 4 NEMA sizes - 2 phase Hybrid Stepper, 1.8° step angle - Optionally available with planetary gearboxes and encoders from Dunkermotoren - High performance compared to competitive products - Made in Europe ...
Power: 7.68, 8, 4.5, 3.84, 9.6 W
Torque: 0.07, 0.09, 0.1 Nm
... Unipolar Drives Motor phase winding current is switched in only one direction (typically to ground). • Simple low cost drive circuit • Requires center tap winding • Low Output Torque • 6 & 8 lead motors Bipolar ...
Hurst
... Stepper motors Stepper motors translate electrical impulses into precise mechanical movements. The outstanding control features facilitate precise starting, stopping ...
MinebeaMitsumi Technology Center Europe GmbH
Torque: 0.014 Nm
Rotational speed: 8,000 rpm
... in the field of Hybrid Stepper Motor technology, we were able to succeed where many have failed. We’ve successfully created a NEMA 6 sized stepper motor that delivers plenty of performance. ...
Lin Engineering
... M15SP-1N Stepping Motors (Ø15) [FEATURES] 1. Compact size, lightweight and high-output torque. 2. Superior running quietness. [USES] 1. Feeding of and printing on small printer paper. 2. Drive for all ...
Torque: 0.135, 0.18, 0.09 Nm
Diameter: 28 mm
... includes: •Brushless DC Motors •Brushless DC Servo Motors with Controller • Stepper Motors • Motor Controllers •Linear Actuators •Encoders •Gears •Custom ...
Nanotec Electronic GmbH & Co. KG
Intensity: 0.35 A - 7.7 A
... the price level of a stepper. The stepIM significantly enhances the performance of the stepper motors, when compared to conventional open loop control. The integrated electronics control the stepper ...
Torque: 0.4315 Nm
... use with two-phase hybrid stepper motors, which, when used together with the units, form non-programmable stepper drives of compact dimensions. The SMD-mini blocks of the second version are the drivers ...
Smart Motor Devices
Torque: 0.014, 0.018, 0.03 Nm
... Short Description: Series Model Step Angle Motor Length Rated Voltage Rated Current Phase Resistance Phase Inductance Holding Torque Detent Torque Rotor Torque Lead Wires Motor Weight ( °) (mm) (V) (A) (Ω) (mH) (N.cm) ...
ACT Motor GmbH
Torque: 0.03 Nm - 10.2 Nm
... The SAM 5620 is a permanent magnet electric stepper motor manufactured by Astro. The unit is especially designed for various forms of mounting. It consists of 1.8° and 3.6°-hybrid stepper ...
... Stepper- Motor: 5-Phase Manufacturer: Sanyo Size: 28mm ...
Intensity: 1 A
Torque: 0.05 Nm
Operating temperature: -20 °C - 50 °C
... Stepping motor with specifications step angle 0.9° holding torque 0.05Nm current 1A size 35x35mm connection Cable. Our entire Stepping motor range includes a range of hybrid type Stepping motors with ...
Transmotec Sweden AB
Torque: 0.028, 0.04, 0.052 Nm
... NEMA 17 Holding Torque from 27 Ncm to 52 Ncm Current 1,7 A Resolution 1,8°/step Size 42.3 mm Length from 34 mm to 48 mm ...
Middex-Electronic GmbH
Torque: 0.08 Nm - 0.36 Nm
... Our many years of comprehensive experience in developing and manufacturing hybrid stepper motors have resulted in an extensive range of standard and specialized models, which are also primarily manufactured at the production ...
MICROSTEP GmbH
Torque: 0.05 Nm
Rotational speed: 0 rpm - 27 rpm
Diameter: 23 mm
... extended shaft The LR23-50 replaces the previous model LR50. Motor performance with waveform Rhomb (filled) and waveform Delta (dotted). The full step angle is the average distance the drive disc rotates when the ...
PiezoMotor AB
Diameter: 15 mm - 55 mm
... TelcoMotion has various Permanent Magnet Steppers (PM Steppers) up to 55 mm diameter that are excellent in high continuous torque and equiped with maintenance-free bearings. Bipolar & Unipolar drive circuits ...
Telco
Power: 2, 5, 3.5 W
Rotational speed: 300, 600 rpm
... The series 119-1 (1.9" diameter) permanent magnet step motor is available in 7.5 degree or 15 degree step angles and can be wound for bipolar or unipolar drives. Motors that are wound for bipolar drives can be ran from ...
Hansen Corporation
Diameter: 20 mm
... Model: BY20U-CS-003 Rated voltage: 8.5V (8.5-30V) Step angle: 18°+/-6% Gear ratio: 45.2:1 Rated torque: ≥2.6kgf.cm, 8.5V/0.5A, 452pps RoHS compliance Application: 4G/5G Telecom Antenna ...
Power: 94.07 W
Intensity: 4.2 A
Torque: 3 Nm
... advantages of the stepper and servo motor technology. Special feature: The closed-loop capable stepper motor driver is already included in the delivery. PHASE INDUCTIVITY 2.8 ...
Joy-It
the best suppliers