|
|
Programmable Servo Controllers featuring Graphic Monitoring facilities
• 1, 2 and 3 kW
• Compact and programmable
• Built-in RS232/RS485 Interface
• 11 inputs, 8 outputs
• Uses programmable FLASH-PROM
• CANopen and CAM profiles included
• Separate logic voltage
• Current overload protection
• Short-circuit and thermal overload protection
• Simple programming with MotoWare
• High resolution electronic gearing
• Facility for graphic monitoring
• EMC tested, built-in mains professional filter
• Mains supply from 1x115VAC to 3x400 VAC
JVL´s new AC Servo Controllers provide many facilities, including very high resolution electronic gearing, built-in sequential program execution, 64 registers, 11 inputs and 8 outputs. The Controllers utilise FLASH PROM for easy upgrades and are CE approved. Programming is easy and very straightforward using a PC and JVL´s programming software, MotoWare. In addition motor operation can be monitored graphically, thus greatly aiding control and troubleshooting.
|
|
MELSERVO - Servo technology that does more
Servo Professional amplifiers: MR-J2S-A, MR-J2S-B und MR-J2S-CL
Mitsubishi offer a wide range of Servo amplifiers to meet the demands of all types of applications. From standard digital pulse and analogue controlled amplifier through to dedicated SSCNET bus type amplifiers, there is a product for all circumstances.
• Real-time autotuning
• Compact design
• Communications capability with RS232/RS485
• Automatic motor type recognition
• Multiple operation mudes (MR-J2S-A)
• Built-in positioning control (MR-J2S-CL)
• 4 different motor types available
Servo Motors: HC-KFS/ HC-MFS/ HC-SFS/ HC-RFS
Mitsubishi Servo Motors are made to high standards and offer a wide range of power, speed and inertia ratings providing a motor for all applications. Ranging from 50W through to 55kW and with specialist type motors available (flat “pancake”motors) the new Super Series Servo Motors complete the line-up of products offered by Mitsubishi Electric. |
|
Together with BSH servo motors, Lexium 05 servo drives are compact and dynamic servo drives for machines with various power ranges and diverse supply voltages.
Lexium 05 servo drives:
100…120 V single phase, from 0.4 to 1.4 kW
200…240 V single phase, from 0.75 to 2.5 kW
200…240 V 3-phase, from 0.75 to 3.2 kW
380…480 V 3-phase, from 1.4 to 6 kW
BSH servo motor:
Nominal torque: from 0.5 to 36 Nm
Nominal speed: from 1500 to 8000 rpm |
|
Applications
Positioning and feed movements with high dynamics and accuracy in:
- Handling and assembly systems
- Optical discs production machinery (CDs,DVDs, ...)
- Electronics production machinery
- Semiconductor production machinery
- Measuring and testing machinery
- Machine tools and metal working machinery
- Packing machinery
- Textile machinery
- Plastics processing machinery
- Coiling machinery
- and many other applications |
|
Aerotech manufacturers of motion controllers are used in our own positioning systems and in motion control and positioning systems throughout the world. Products include the Automation 3200 intelligent, 32-axis motion, vision, PROFESSIONAL PLC, robotics, and I/O platform that provides from 1 to 32 axes of synchronized control, the Ensemble stand-alone controller for up to 10 axes, and the Soloist single-axis controller family. In addition, Aerotech manufactures a complete line of drives that are perfectly matched to our motion controllers, as well as our brushless linear motors and professional brush and brushless rotary motors.
|
|
C3 powerPLmC Features
Motion Control with function modules
Easy to implement a Drive with the integrated Drive-Interface.
MANUFACTURERS OF PLC functionality: 4 real time tasks types, debugging, single step,watch function, log, simulation, online trace, breakpoints.
Visualisation: OPC or integrated
Project management
File handling: FTP Client / Server
Combineable with Servo drive Compax3:
Compax3 I21T11: Positioning via CANopen
Compax3 I21T30:
Positioning via CANopen and function modules according to IEC61131-3 and PLCopen
Compax3 I21T40:
Electronic Cam via CANopen and function modules according to IEC61131-3 and PLCopen |
|
| The new smc pci controller card is designed for controlling 2 phase stepper motors. The card is available with 2 or 3 axes and can be later on upgraded to the 3rd axis by keycode. You can get several options like closed loop control with RS422 or 1VSS as well as joystich, IO´s and much more. The professional amplifier is onboard - a very cost effective solution starting at around 1300 €. You have never seen such a microstep which is sin-cos evaluated and doing better resolutions than 5 nm. An up-to date controller - a nice solution is also our smc pollux controller which is a single axis controller controlled by RS232. It can be daisy-chained up to 16 axes and has also amazing characteristics like microstep, high dynamics and else. |
|
The PS 30 is a PCI-PC industrial control card consisting of a plug-in card and a card for slot panel mount. Three axes with 2-phase step motors or professional brush DC servo motors can be operated (mixed equipment). Each axis has two inputs for incremental encoder or position measuring system. Thus, very precise positioning in closed loop mode is possible for all drive systems. Step motors can be operated from full step up to 256 micro steps per full step.
The PS 30 is operated and programmed by a PC. Point-to-point positioning mode with different velocity profiles as well as complex continuous path control like circular interpolation or 3-axes linear interpolation are possible.
Part of the delivery is a 3-fold motor adapter cable and also the software tool OWISoft for comfortable configuration and operation of the PS 30.
- 3-axis control
- for 2-phase step motors and DC-servo motors
- PCI plug in card
- 8 TTL inputs, inputs for limit switches and professional encoder
- 5 TTL and 2 power outputs
- point-to-point operation, circular interpolation and linear interpolation
Option
- connecting of industrial measuring systems |
|
Following customer requests, the well-established VOLKSSERVO–Controller RBD 325 was further developed. The outcome is a new controller, which now gives solutions for applications without needing any additional control-elements.
The controller comprises:
• Digital controller in 4-Q-mode and continual transition
• Controlling torque, r.p.m. or positioning
• CAN-communication and RS232
• Technology-adaptation optional, e.g. Profibus-module
• 64 storable positions, integrated control-path
• incremental pick-up - outlet / input
• comfortable parameter professional software, e.g. oscilloscope-functions
|
|
TWIN-SPD Drive for brushless motors
TWIN: Two SPD drives in one case with the same dimensions
Resolver, incremental encoder and SinCos+EnDat absolute encoder (optional) feedback
Positioner with speed trapezoidal profile
Digital lack with variable ratio and phase correction
Electronic cam
Built-in PLC MANUFACTURERS with ladder and instruction list programming language (128 steps)
CanBus standard (CanOpen DS301 or SBCCAN)
DeviceNet and Profibus-DP communication (optional via Bridge accessories)
CE certification, UL & CSA certification (TWIN series and SPD up to SPD8)
|
|
| All-in-one motion control system. Combines a PLC SUPPLIER, a sequential motion controller and AXIOM drive technology. Less space requirements with fewer components to wire and program. Intuitive set-up and configuration software for easy set up. ASCII and Modbus RTU interface. |
|
The main characteristics of drives are listed below:
- Closed-loop integrated system with Position, Speed and Torque control mode.
- Switching Control Mode: it allows a mixed use of digital and analog signals with possibility of "on fly" change: position + speed; position + torque; speed + torque.
- Scale factor that can be set by the user on both analog and frequency inputs and on the repetition of the professional encoder signal. .
- PNP/NPN/Differential frequency interface, with digital professional filter that can be configured by the user for noise immunity..
- Integrated management of overtravel signals.
- Double built-in fully automatic notch filter to remove the system's resonance frequency.
- Control: with pulse train (clock + direction; forward + backward pulse; 90° phase shift) or with analog signal (proportional to Speed or Torque)
- Optically coupled digital control I/O.3 inputs and 2 outputs with user-defined functions.
- External regenerative resistor provided with sensing for maximum temperature alarm (optional). .
- 200VAC to 230VAC Industrial power supply [+10%; - 15%], single-phase or three-phase (can be set by operator).
- Power sections kept separated for logic/signal and power electronics
- Built-in protection circuits against any overload, input overvoltage and any motor connection error (wrong encoder wiring, phase-phase and phase-ground short-circuit).
- The professional amplifier can be set and monitored by a PC. with RS 232 interface.
- Dynamic braking circuit activated when the power section is not powered or in case of alarm. |
|
| High-speed accuracy with user friendly set-up and diagnostics. State-of-the-art DSP controlled digital vector commutation optimizes bus voltage for improved speed/torque curves. Flux vector current control improves motor efficiency by providing more torque over the full speed range than is possible with traditional sine drives. Available in 10, 20 or 30 Amp peak ratings (3 sec). Convenient pluggable screw terminal industrial connectors for fast, easy set-up and installation. Set-up software employs a straightforward "control-panel" approach, making it easy to get up and running fast. |
|
Servos Series COMPAX3
Diagnosis remotely everywhere in the world
Technical description:
IEC 61131-3/PLCopen
Electronic cam
CANopen
Ethernet Powerlink & TCP/IP
DeviceNet
Profibus
Remote diagnosis.
Advantages: The control of electromechanical and hydraulic actuators allows
Reduced the component count different of automation by the use of the same platform controller
All the components are studied, programmed, installed, and their assured maintenance starting from a common software platform
Easy access to the machines installed in the whole world thanks to the functionality remote Diagnosis
Significant reduction of times and costs of voyage like to the access to the machine
Contribute to a parameter setting and an easy support of maintenance
A simple integration in many structures of automation of machines is ensured by the various standards of communication proposed.
Applications: Automation of machines - Machines of forming Conditioning machines Systems and installations of handling.
|
|
EPOS P 24/5 - programmable positioning controller
The new programmable EPOS P positioning controller is a new addition to the successful EPOS family. With all the features of the online-commanded EPOS slave version, this new master version also has an integral processor and memory for stand-alone operation and independent controlling of up to 127 other units via CANopen bus. Programming complies with IEC 61131-3 standard. Standardized function blocks in accordance with PLCopen motion control standard make implementation easy.
EPOS P 24/5 is a freely programmable positioning controller with an integrated power stage for brushless and professional brush Industrial dc motors of up to 120 watts. This makes it ideal for very dynamic and minute precision drives and controlling systems. Several drives can be networked and coordinated through a standardized CANopen interface, particularly other EPOS slave units. Different operating modes can be pre-selected for controlling purposes (point-to-point, positioning controller with Feedforward, speed controller, torque control, Homing , electronic gearing, step/direction and position marker).
|
|
High Performance at Low Cost
Integrated Driver, no External Professional amplifier Required
Stand-Alone Functionality
Daisy-Chain Network for Multi-Axis Applications
Easy Address Setting
Macro Command Language
Non-Volatile EEPROM for Macros and Parameters
Parameters can Be Changed On-the-Fly
TTL Inputs for Limit & Origin Switches
Motor-Brake Control
Additional TTL I/O Lines
|
|
EC 750 is a new and unique BLDC motor governor for the growing market of energy saving industrial fans etc. It is also a SENSORLESS controller, so the need for positioning detection in the EC motors are past….
Compared to traditional Frequency inverters and Alternating current motors, the new
EC 750 and attached BLDC motor can save between 20-30% of energy.
It is a GREEN product that meets new environmental demands around the world. Moreover, EC motors have a flat characteristic, so the moment of inertia is almost constant during the controllable speed range.
EC 750 employs the newest "state of the art" technology within sensorless control of BLDC motors, and will be best suited for environmental demands in the future. Saving energy, saving the planet, saving money …
Motors have to be matched to the controller for optimum performance and energy savings. Motron works together with suppliers of this kind of motors and will support this part as well.
EC 750 comes as a “plug and play” unit. Connect power and motor, analogue control and that’s it! Multiple safety functions makes the controller extremely robust, and the integrated Emc filter ensures CE compatibility.
Also, the EC 750 can be controlled digitally . RS 485 interface and Modbus protocol will deal with that shortly. |
|
Applications
Positioning and feed movements with high dynamics and accuracy in:
- Handling and assembly systems
- Optical discs production machinery (CDs, DVDs, ...)
- Electronics production machinery
- Semiconductor production machinery
- Measuring and testing machinery
- Station tools and metal working machinery
- Conditioning machinery
- Textile machinery
- Plastics processing machinery
- Coiling machinery
- and many other applications |
|
Servo Controls
Baldor has shipped thousands and thousands of AC and DC servo motors, drives, and controls to many diverse applications throughout the world. It all began in 1952 when Baldor shipped its first reliable adjustable speed control, and in 1983 Baldor began shipping easy to use servo controls and that tradition continues today.
Baldor's philosophy is to make control set up very fast, and easy, and quick to implement. This is accomplished by either a simple keypad, or through set-up wizards and your PC.
Baldor products help increase productivity, improve quality, work hard %u2013 and provide solutions for your application needs.
|
|
PositionPro2 Combination Controller/Dual-Axis Digital Servo. Cambridge Technology's PositionPro2 is the next generation in integrated mirror positioning stations. This compact fully integrated positioning system combines real-time scan system motion control with professional laser control and auto-calibrated closed loop digital servo driver-amplifiers for Cambridge Technology Inc. galvanometer industrial scanners. This fully digital DSP-based system includes, an intuitive unified graphical software workshop to simplify application creation, enable quick experimentation, and to reduce customer application development time.
PositionPro2 includes a built-in command signal generation subsystem to quickly and easily implement raster scanning, triangle-wave scanning, and sinewave scanning. Also included is a complete vector motion control language allowing complex jobs to be downloaded via the USB-2 interface into the PositionPro2 memory for execution. Two 16-bit manufacturer of data acquisition channels are optionally available to allow external data to be acquired synchronous with the galvo motion. |
|
The Next Generation in galvanometer PROFESSIONAL DSP servo control, the DC2000 Dual-Axis Digital servo utilizes state space algorithms to provide speed far beyond that an analog PID servo. The DC2000 uses model based predictive reasoning to provide real-time optimization for all galvo motion, reducing step times and tracking delays for allowing an increase in speed of 3 to 4 times that achieved with a PID servo for laser marking applications. Other cost reducing features include self tuning and startup calibration with no computer required, and remote access/support capability. The DC2000's flexible power supply specifications configuration capabilities make it the ideal choice for professional laser marking and other applications where speed and precision are required.
|
|
ARIES Digital Servo Drive Series
The ARIES series is a range of panel-mounted digital servo drives offered in five power ratings, covering the range from 100 to 1300W. Designed for 120/240VAC direct online operation, Aries series drives also offer the option of using a second 120/240VAC supply to keep alive logic circuitry when the HV is removed.
The ARIES series of compact digital servo drives require no setup - when used in combination with the 'Smart-Encoder' version of the BE or SME-series motors, the drive will automatically configure itself. Furthermore use of the standard 'PS' or 'Parker-Style' interconnectors permits use of the standard range of ready-wired cable sets.
Available either as a ±10V analogue input command version for torque/velocity control, or as a step/directioninput command version permitting stepper replacement, the Aries range is both CE and UL certified.
|
|
Parker's Compax3 digital servo drives have been enabled with ETHERNET Powerlink (EPL) motionbus technology.
Available in both 120/240 VAC and 480 VAC input versions
Current output from 2.5A RMS continuous to 155A RMS continuous
Available with ETHERNET Powerlink
Certified Category 3 Safety (EN954-1 Cat. 3)
Programs in all five IEC61131-3 International programming standard
Scalable control technology: preset professional indexer to fully programmable
Advanced following and camming support
Support for SSI feedback for additional load control
Resolver, Professional encoder, Sine-Cosine or Stegmann feedback
Multiple field network options, including DeviceNet
Internal regeneration circuitry with external resistor connections
Easy-to-use wizards-based configuration via C3 ServoManager(TM)
Full diagnostic, tuning and 4-channel oscilloscope features provided in the standard C3 ServoManager(TM) professional software
CE (EMC & LVD) |
|
|
Servo drives
