Servo-drives

Intensity: 5 A - 35 A
Output power: 0.9, 6.3, 1.8, 5.4 kW

... Overview
The NanoPLUS series is Copley Controls' smallest servo drive family for direct motor mounting or integration inside robotic joints and compact electromechanical assemblies. Designed ...

Output power: 50 W - 3,000 W

... DX4 AC Servo Drive D0100 - D0108 Introducing Trio's solutions with the new DX4 servo drives, our all new drive and motor packages that provide performance and dependability, ...

Intensity: 200, 10, 13 A
Output power: 2, 130, 900, 3 kW

... Professional Servo Drives Designed and built to offer high standards of quality and efficiency. Maximum quality and all-Italian technology, carefully curated in every phase. Control for brushless, continuous and ...

Intensity: 8, 16 A

... esitron has developed the compact SC8 servo controller especially for small spaces. The compact booksize module (112x68x28mm) with 24 to 60V DC supply and high power density has everything on board that ...

Intensity: 2 A - 32 A
Output power: 0.5 kW - 16 kW

... and KMx series of digital servo drives for three-phase, permanent-magnet, synchronous servo motors and torque motors are compact devices for panel mounting. The KTx and KMx drives ...

Intensity: 10 A
Power: 500 W

... NET-E: PCB MOUNT, ULTRA-LOW PROFILE ETHERCAT SERVO DRIVE CAPITAN NET ETHERCAT SERVO DRIVE HIGHLIGHTS Compact and super-flat design (10.3 mm) • Dual loop support for ...

Output power: 8.8 kW

... EtherCAT PROFINET POWERLINK EtherNet / IP CANopen Modbus TCP Drive Studio software workshop : The Drive Studio software tool makes it very easy to configure the SMD series drives from a PC with ...

... to fully integrated drive packages including control platforms and software templates for fast commissioning.

Scope of the system solution

• Complete main drive system: high-torque DST2 motors,

Intensity: 5 A - 10 A

... Product overview
The FE060-5-IPM is a FlexPro® PCB-mount servo drive with IMPACT™ architecture, designed for distributed or centralized servo systems. It provides full tuning control of servo ...

Intensity: 10 A - 20 A

... The UDMac is part of the Universal Drive Module (UDM) series of EtherCAT-based drives for OEM multi-axis motion control applications. Controllable by any ACS SPiiPlus Platform EtherCAT MainDevice, it uses advanced servo ...

Output power: 30 W - 1,500 W

... SPECIFICATIONS - Input voltage: 1 x 200-240VAC 50/60Hz or 3 x 200-240VAC 50/60Hz or 1 x 100-120VAC 50/60Hz Servo drive capacity: 10, 20, 30, 50 Control modes & interfaces: (1) Position: pulse train (2) ...

Intensity: 7.5 A
Output power: 0.6 kW

... 2-axes servo amplifier and implements as a PCB solution for integration on customer side. 2-phase synchronous servo motors, brushed DC servo motors and stepper motors can be controlled ...

Intensity: 10, 15, 4.5, 3 A

... networking The SSDC03 StepSERVO Drives are the closed-loop versions of our well established, high performance, microstepping step motor drives. By incorporating closed-loop servo control algorithms ...

Intensity: 5 A - 30 A
Power: 4 kW - 9 kW

... With the DIAS Drives from SIGMATEK, the right servo system is available for any motion application: the highly compact, modular multi-axis system DIAS Drive 2000 for 1 to 3 servo axes ...

Intensity: 4 A
Output power: 144 W

... The ElectroCraft PRO Series Programmable Servo Drives are based on a new design concept offering a cost effective, compact and modular solution for the control of rotary or linear brushless, stepper or ...

... functionalities of the servo drive. Additional macros can be programmed in the VLC to perform subroutines/functions that can be called from the EtherCAT master. Background knowledge on the VLC is required to configure ...

Intensity: 1 A

... AMP 1 is a Linear Amplifier in the 3U UMAC rack form factor designed to drive small DC brushed type motors, galvanometers, piezoelectric motors, voice coil motors, or proportional hydraulic valve actuators. This amplifier provides four ...

... With the components of our drive technology, the E°Darc family, suitable drive systems with extensive functionality and excellent drive behaviour can be configured: from simple transport tasks to complex ...

Intensity: 5 A

... PSV24-05E is a servo driver compatible with our coreless brushed motors/brushless motors*. Various control modes and I/O are incorporated into a compact board that matches the sizes of Orbray’s motors. Compatibility ...

Intensity: 3 A
Power: 5 kW

... 24V/3A power supply unit supplies energy to all connected components, such as ihXT inverter-integrated servo motors and other decentralised drives. It can also act as a gateway to higher-level control systems. The gateway ...

Output power: 0.5 kW - 3.9 kW

... Characteristics • The Max. position command pulse frequency improves to 1MHz; the servo motor encoder resolution increases to 5000; the command speed and position accuracy are enhanced, and the speed wave is reduced; ...

Intensity: 1 A - 20 A
Output power: 0.08 kW - 1.6 kW

... The Gold Whistle is a DC digital servo- drive that requires 80 - 1 600 W. It is a digital servo drive that offers up to 1.6 kW of continuous power or 3.2 kW of peak power. This advanced ...

... »» Absolute / relative positioning commands »» Limited jerk motion commands »» Time Curves »» Real Time (Streaming) »» Master Encoder Synchronization (In/Out) »» PLC or Stand-Alone Solutions »» Digital and Analog IO’s »» Interface for optional ...

Intensity: 8 A - 300 A

... – 96VRated Current: 200ASplit – type Drive Hardware InterfaceApplicable drive models: D – AISXX005A / D – AISXX0015A / D – AISXX0025A / D – AISXX0040A / D – AISXX00100A / D – AISXX00200ASplit – type AI MOTOR Drive ...

Intensity: 10 A - 20 A

... Overview
The EWDU is a compact single-axis servo drive designed to control brushless AC and DC- servo motors. It provides straightforward configuration via Drivewatcher and a ...

Intensity: 6 A

Intensity: 10 A - 80 A
Output power: 0.33 kVA - 55.4 kVA

... Powerful, flexible, low cost – these words describe the servo drive SD2S by SIEB & MEYER. The compact dimensions allow space-saving design of the switch cabinet. Linear motors, rotary servo ...

Power: 200, 400, 600, 750, 1,000 W

... series servo drive is an ultra-small motor drive for mobile robots, with a modular design and a reliable control interface, which can be quickly and easily integrated for customers. Description - ...

Intensity: 12, 18, 20 A

... The ZED by STXI Motion is a ready-to-connect compact low voltage servo drive with an output current of up to 30A. Its small footprint enables space-saving and near-motor mounting, fitting easily within ...

... Auto Phasing - Current Filter - Anti-Cogging Auto Tuning - Oscilliscope - Scripting Auto Gain Switch - S-curve Profile ...

Intensity: 3.7 A - 1,100 A
Power: 1,500 W - 630,000 W

... KE600B Series Spindle Servo Drive KE600B series high-performance spindle servo drive built-in position loop and servo positioning function. When used in the machine, ...

Intensity: 3 A

... The AMD2000 Series is ANCA Motion’s latest generation of AC servo drives. The servo drives are significantly smaller than previous generations, reducing the need to consider costly cabinet ...

Intensity: 1 A - 50 A
Power: 2,500 W

... Universal drive as a revolution in the market’s view of automation. Ultra compact dimensions open the horizon to a multitude of new application concepts. High precision and excellent dynamic performance. FEATURES ...

... The OPDE series is manufactured by TDE Macno, and is a brush-less servo- drive which has connectivity of Modbus, CANopen, Profibus DP and EtherCAT. It also has a sensor-less control algorithms that is intended for brush-less ...

Intensity: 10, 20 A
Power: 1.1 W - 2.1 W

... Capitan High Power Density Servo Drives Capitan High Efficiency, High Power Density Servo Drives Summit Series 10A | 8-60VDC | 99% Efficiency SMART SERVO DRIVE The ...

Intensity: 9, 6, 4 A

... software, the mini QDrive overcomes this problem. Single phase supply between 100VAC and 240VAC, 4A nominal. Three phase supply 240VAC, 6A nominal or 9A nominal. No cables needed between control cabinet and motor drive ...

... AC servo driving system (SVO) TECO's G2-series servo driving system (SVO) boasts excellent response and ultra-thin design, topnotch electric-current circuit control technology coupled with 1.5KHZ high-response bandwidth, ...

... converters, direct digital command input, and highly configurable servo algorithms, the Mach-DSP provides full-function, two-axis servo driver electronics in a cost-effective and compact package. Many ...

Intensity: 2 A - 30 A
Output power: 350 W - 11,000 W

... flexibility and exceptional capabilities in a wide range of applications. Available either with 230 and 380VAC supply, this drive family communicates with a motion control system via fieldbus either via CANopen, with the integrated interface, ...

Intensity: 2.8 A - 9.8 A
Power: 0.01 kW - 15 kW
Output power: 0.01 kW - 15 kW

... with a variety of high-performance encoders. 8. Advanced motor electromagnetic and structural design. Application of servo motor： 1. Automation equipment • Robotics • CNC machine tools • Automatic production line 2. Aerospace 3. ...