|
|
|
The VARIMOT DC motors comply with the IEC international recommendations and all the national standards based on it, including ABNT (Brazilian Association of Technical Norms). Their power range from 0.5 to 500 CV and in Calendered Body (BN-Series) and Laminated Body (C-Series) models.
|
|
|
|
|
|
WEG DC motors are designed with the application of modern
technology resulting in compact machines featuring excellent
dynamic properties, meeting the most severe application in
areas that include automation and process control.
Technical Characteristics
The WEG DC motor lines are offered in outputs ranging
from 0.5 to 5000kW, with torques ranging from 2 to
200,000Nm, and are applied in the most diverse industrial
applicat ions, including paper, plastic industries,
among others.
Designed for tiristorized drive application, WEG DC motors
allow a wide range of voltages from 170 to 1000V, and
are manufactured in frames sizes 90 to 900 (IEC).
Advantages
Besides offering reliability and high performance, wich will guarantee long
opereting periods without requiring any maintenance, the WEG DC motors
present relevant characteristics which include:
- Wide speed variation range
- Dimensions as per ABNT and IEC Standards
- Low weight/output ratio
- High efficiency
- Low noise level
- Low moment of inertia
- High capacity to dynamic loads
- Rugged construction
- High vibration resistance
- Excellent commutation quality
|
|
|
These durable permanent magnet and wound field motors range from 1/8 to 5 horsepower in open TENV and TEFC designs. A wide range of choices exist for general purpose applications, sealed washdown motors for food processing and food service, IEC metric motors, special purpose servo motors as well as low voltage and custom designs. Plus A.O. Smith offers a variety of options for DC motor speed control.
|
|
BISON 32 SERIES
Motors are available in 12, 24, 90, or 180 voltages. Limited models available with a C-Face adapter.
|
|
|
PMDC 1/10 Hp IEC DC Motor - 1800/3600 rpm, continuous duty, at 1.4 form factor power supply. Dynamically balanced armatures for low vibration and noise reduction. Large brushes for long life. Premium motor duty ball bearings
|
|
BISON 26 SERIES
Motors are available in 12, 24, or 90 voltages.
Optional Features / Accessories
• Die Case Junction Box with gasket
• Terminal Block and ground screw.
|
|
Overview:
GE Industrial Systems has been designing and building DC machines for over 100 years. We can offer new designs and rerates up to 12,000 HP.
Features and Benefits
- Class F or H insulation polyimide films.
- Split magnet frame for easy maintenance
- Best In Class Test facility with Back to Back testing capabilities.
- ISO 9001 - 1994 Approved Supplierons
|
|
|
|
|
|
GE Kinamatic General Purpose
General Electric general purpose DC motors are available in commercial and industrial offerings. They are designed for complete compatibility with industrial DC drive applications. Motors are available in drip proof and totally enclosed enclosures. These motors are used for conveyors, textile machines, printing presses, packaging machines, extruders, fans, medical equipment.
Features and Benefits
- Horsepower range: ¼ through 3500 HP
- Armature voltage range: 90, 115, 180, 240, 500, 600, 700 volts
- Class F insulation
- Available in shunt, compound, stabilized shunt and commerical permanent magnet designs
- Capable of 150% of rated load for 60 seconds
- Continuous operation in 40C ambient
- Provisions for mounting tachometer kit
- Continuous rated torque to 5% base speed on separately and blower ventilate and TENV motors
- Continuous rated torque to 60% on Drip Proof Fully Guarded and TEFC motors
- TREC coils on Industrial CD360AT through CD6000 frames.
Applications
- Cranes
- Hoists
- Conveyors
- Extruders
- Printing
- Machine Tools
- Packaging
|
|
5inch BZD Serial Pump DC Motor
Voltage : 12-48 V
Power : 2300 - 3000 W
Direction : CW, CCW
Rated Current : 2800 - 3450 rpm
O.D. : 125 mm
BZD-3.3 Serial Pump DC Motor
Voltage : 24 V
Power : 3300 W
Direction : CW, CCW
Rated Current : 3350 rpm
O.D. : 126 mm
4.5inchBZD Serial Pump DC Motor
Voltage : 12-48 V
Power : 1500 - 2500 W
Direction : CW
Rated Current : 2300 - 2600 rpm
O.D. : 114 mm
Small Serial Pump DC Motor
Voltage : 12-24 V
Power : 300 - 1200 W
Direction : CW, CCW
Rated Torque : 1.5 - 3.5 Nm
Rated Speed : > 1430 - 4000 rpm
O.D. : 84 mm
|
|
The modular design of our popular DC motor range offers a high degree of flexibility to adapt to the driven machine, and to fit into a restricted space. Our Drop-In solution permits adaptation of footprint, shaft extension and flanges to match dimensions of almost all DC motors, our own range as well as others, new and old, in the market. This, in combination with our short and reliable delivery times, makes T-T Electric DC motor range the right choice also in the retrofit market.
LAK 2000 DC Motors
• 2 poles
• Frame sizes 80-132
• Outputs up to 20 kW (26 HP)
|
|
DC-motors
* Good efficiencies, high peak load through the use of premium ferrite materials and optimized magnet systems
* High-quality design
Steel tube housing, externally accessible brushes
* Versatile compatibility
Well-graduated gear series, parking brakes, tachometers and incremental encoders
|
|
GE Kinamatic Explosion Proof:
The KINAMATIC® Explosion-proof (XP) motor is a totally enclosed machine with a housing constructed to contain any explosion within the motor caused by the hazardous atmosphere entering the enclosure and being ignited.
GE Kinamatic General Purpose:
GE's general purpose DC motors are available for industrial applications. Motors are available in totally enclosed and open drip proof enclosures. Used for conveyors, textile machines, printing presses, packaging machines, extruders, and fans.
GE CD6000 Large DC:
GE Motors has been designing and manufacturing DC machines for over 100 years. These industrial designs are offered up to 12,000 HP for an array of applications.
GE MD800 Mill Duty:
This armored mill motor meets AISE standards.
|
|
|
|
|
|
The company Groschopp AG has totally revised, re-modelled and renewed its well-established – and for many years successfully run – range of field-wound commutator motors (EM, KM).
The goals at the start of this re-design were set as follows:
• Enhancing the power spectral density
• Improving the electromagnetic compatibility (EMC)
• Reducing the brush-wear
• Reducing manufacturing variances
• Reducing manufacturing cost
The new models of field-wound commutator-motors made by Groschopp AG comprises 6 different type sizes.
• KE / KH 44
• KE / KH 50
• KE / KG 70
• KE / KG 80
• KE / KG 87
• KE / KG 94
The first classification letter stands for the motor-manufacturing-principle (K: field-wound commutator-motor), the second classification letter stands for the model-construction (E: skeleton-type motor, G: housed motor, H: hand-motor), while the number following the two classification letters gives the outside-diameter in mm of the pole-ring stack.
The higher power spectral density of the new models can either be used for performance at a higher output-torque, or else – using the same torque as before – the volume of the motor can be reduced.
|
|
Fractional through 3 HP
features:
• Non-metallic NEMA 4X enclosures
• Precise 1% speed regulation
• Reversing and non-reversing versions available
|
|
Lenze DC shunt-wound motors can be ideally matched to specific machine tasks because they enable you to select precisely the right degree of protection, type of winding, type of construction and the appropriate built-on accessories.
MGFQ shunt motor
High power density as a result of the square design and internal cooling, IP 23S degree of protection, standard dimensions for gearbox mounting, additional modular built-on accessories. Power ratings from 0.33 to 90.8 kW.
more >>
MGFRK shunt motor
IP 54 degree of protection, fully compensated, IEC standard housing, sizes 90 to 160, variable additional modular built-on accessories. Power range 0.33 to 27 kW.
more >>
Permanent magnet motor 13.120
High power density smooth-bodied design and naturally ventilated, enclosure IP 54, standard measures for gearbox mounting, additional built-on accessories in modular system, powers from 0.055 to 0.6 kW.
|
|
Market Served TOP
1. Metals (Steel Rolling Mills, Aluminum Rolling Mills)
2. Chemicals (Polyester Film, Extruder, Agitators)
3. Mining (Hoists, Draglines, Sag Mills)
4. Paper Machinery, Sugar Industry
5. Special Applications
Type of DC Motors
1. Series
2. Shunt
3. Compound
Standards:
BS5000, IEC, NEMA
Supply Scope
1/2 ~ 3,000 HP (0.4 ~ 2,200 KW)
500 ~ 1,800 RPM (Base Speed)
Enclosure
IP 23, IP 44, IP 54, IP 55
Cooling
IC06, IC37, IC0666, ICW37A86
DC Controllers / Control Panels
Digital or Analogs, 2Q or 4Q,
Armature Current Ratings (Adc): 3A ~ 2700A,
Armature Voltage: 150 ~ 750 Vdc
|
|
|
Technical Description. Motor casing: Deep drawn, corrossion protected. Excitation field: Permanentmagnet. Method of bearing, A-side: Ball bearing. Method of bearing, B-side: Sleeve bearing. Mechanic interface: Output shaft. Electric interface: Leads with connector or tinned leads.
|
|
APPLICATIONS:
Designed for general industrial equipment including fans, blowers, compressors, pumps and direct connected equipment.
FEATURES:
Permanent Magnet
• Totally Enclosed Fan Cooled / Totally Enclosed Non Vent
• NEMA®† C-Face
• Removable Feet On Rigid Base Units
• 20:1 Constant Torque Speed Range
• 40°C Ambient
• Two Armature Leads & No Field Connections Are Required
Shunt Wound
• Totally Enclosed Fan Cooled
• NEMA®† C-Face
• Removable Feet
• 20:1 Constant Torque Speed Range
• 40°C Ambient
• 90 Volt Armature 100/50 Field; 180 Volt Armature 200/100 Field
|
|
DC-Motors Series 5/6/7
True values last forever! The same applies to DC motors from Siemens. Even if it has been forecast long ago that the end is nigh for them, we shall retain this technology. After all, in daily use the DC motors have for decades proved their worth; it is therefore not necessary to consider an alternative.
Together with the SIMOREG DC-MASTER drive converter units they form the ideal drive set wherever competitive prices and high availability are required.
|
|
Including:
PM36 Custom permanent magnet motors up to 75 watts
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts.
minimum order quantity: 100 units per annum
|
|
Sauer-Danfoss provides a full line of DC motors and AC induction motors specifically designed for traction, pump, and steering operations in battery-powered vehicles. Typical applications include forklift trucks, walkies, tow tractors, and man-lifts.
DC motors, type TSL
Series wound, split field, compound wound, shunt wound, and permanent magnet DC motors are part of our product portfolio.
Product range: Traction motors; Ø 80-325mm, 0,2-40kW, 12-200V; Pump motors; Ø 80-250mm, 0,4-25kW, 24-80V; Steering actuators; Ø 80-150mm, 0,05-2kW, 24-80V;Gear ratio: 18:1-93:1.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
|
|
|
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
|
|
|
|
FAULHABER BX4 Series 2232 - Brushless DC Servomotors
New developed compact- design
Reliable and long-lived
With the introduction of the BX4 series of brushless DC servomotors, FAULHABER once again underscores its position as an innovative market leader in highly integrated miniature drive systems. Using the latest production methods, some specially developed by FAULHABER, the company has come up with a modular design that is limited to just a few components and entirely eliminates the need for adhesive-bonded joints. Despite the compact dimensions, the new four-pole concept of the series ensures a high continuous torque of up to 12 mNm, with a flat gradient of the n/M characteristic curve.
Notable features are the smooth running characteristics and the particularly low noise level. Thanks to its electronic commutation, the brushless servo motor series is characterised by a much longer service life than mechanically commutated drives. Whilst in the basic version the commutation is provided by an external control, the flexible motor concept of the BX4 series also offers versions with integrated speed controller or integrated encoder. The encoder version is available in four different preset resolutions: 32, 64, 128, or 256 quadrature impulses per revolution. It is available with an optional line driver and differential output signal. In addition to mechanical speed adjustment, the new planetary gearheads of the 22F series also allow a temporary torque increase up to 1500 mNm. Designed with one to four stages, the precision gearhead in steel 21 offers finely graduated reduction ratios, and the diameters can be combined in conformity with the BX4 drives.
|
|
The RDxx is a complete positioning unit which integrates a DC gear-motor, a drive, an encoder and a controller. Profibus, CANopen and RS485 interface are available.
The Rotadrive is capable to move axis to target positions by means of ramps and with backlash compensation.
Thanks to its small dimensions (58x125x105 mm) RDxx can be mounted directly on spindle with Ø14mm and fixed by means of the collar and the anti-rotation pin.
Typical applications of this product is on tool-changers, gauges and packaging machinery.
|
|
MODEL SERIES - GEARED MOTORISED POTENTIOMETERS
DC MOTORS WITH POT ASSEMBLY
Design -
Mech-Tex offer various assemblies in which a potentiometer with different gear ratios can be mounted in series of the gear train. Thus the geared DC motor operation can be convert in to a close loop one. Suitable mounting arrangement to mount the potentiometer on the gearhead is provided. Use of suitable reduction gear ratios can make the potentiometer rotate more or less (as per requirement) number of rotations with respect to the output shaft. Thus the reading provided by the potentiometer can be more accurate.
|
|
Coreless rotor means no cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low starting voltage
Low rotor inertia for extremely fast acceleration and braking
Extremely light and compact
Smooth and accurate speed, position, and torque control
Custom systems available from design to production
Higher power to volume than other DC motor technologies
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
|
|
Characteristics
*Diameter : Ø2 to 16
*Voltage 3 to 18 V
*Torque : 1.44 to 14.4 mNm
*No load speed : 5,000 to 16,000 rpm
Spur or Planetary gearbox and Feedback decvice are available.
Feature
*Miniature size
*High Torque constant
*Low Mechanical time constant
*No cogging
Application
*Locomotion
*Robot
*Medical pump
*CCTV
*Electrical Key lock system
|
|
|
|