|
|
| Products 91 to 120 of 131 |
Overview:
The GE permanent magnet DC motor is dependable, reliable and flexible. Designed for low maintenance, these PM motors are intended to provide years of worry-free operation. Available from stock, these adjustable speed drive DC motors combine exceptional value and rugged construction with immediate availability for a multitude of applications.
Voltage : 90 and 180V (for use with Type K power supply)
Ratings : 1/4 to 3 HP
Enclosure : Totally enclosed
Service Factor : 1.0
Ambient Temp : 40°C
Insulation : Class F
Features and Benefits
- Constant pressure brush mechanisms improve brush and commutator life
- Large, shielded ball bearings are pre-lubricated
- C-face endshields are standard on all models, while optional bolt-on bases provide additional mounting options
- Adaptable with customer supplied tachometer kits for GE 5PY59JY or Servo-tek tachometers
- UL and CSA recognized
- Custom ratings are also available for high volume applications
|
|
GE Permanent Magnet Standard
The GE permanent magnet DC motor is dependable, reliable and flexible. Designed for low maintenance, these PM motors are intended to provide years of worry-free operation. Available from stock, these adjustable speed drive DC motors combine exceptional value and rugged construction with immediate availability for a multitude of applications.
|
|
GE Permanent Magnet Custom:
GE permanent magnet DC motors provide rugged construction features. Custom shaft configurations, mounting face, conduit boxes, motor leads and footprints are available. Designs for battery-powered and rectified AC are also available.
GE Permanent Magnet Standard:
GE permanent magnet DC motors are dependable and flexible. Designed for low maintenance, these motors are intended to provide years of worry-free operation. These adjustable speed drive DC motors combine exceptional value and rugged construction.
GE Permanent Magnet Washdown:
The enclosures of these motors are designed to offer greater moisture and corrosion protection than totally enclosed motors, making them suitable for washdown applications.
|
|
Voltage: 180 V DC, 24 V DC
Other voltages from 24 V up to 250 V DC on request
Power: 40 - 350 Watt
Speed: 2000, 3000 min-1
Other speeds on request
Type of protection:
Type EP 0, EP 1 und EP 2 with flying leads, Standard IP 44
Type EP 0, EP 1 with terminal box, Standard IP 44
Type EP 2 with terminal box, Standard IP 54
|
|
|
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
Small Coreless motor
Small Brushless motor
* Coreless motor
- Outer diameter : Ø7 to 18
=Voltage 3 to 12v
- Output power : 0.19 to 3.5 W
- No load speed : 9,000 to 17,500 rpm
- Starting torque : 0.43 to 3.5 mNm
Spur or Planetary gearbox and feedback device are available.
* Brushless motor
- Outer diameter Ø 1.5 to 30
- Voltage 3 to 24 v
Spur or Planetary gearbox and feedback device are available
* Applicatition
- Optical and Measuring instruments
- Medical instruments and apparatus
- Factory Automation and instrumentation
- Servo system for remote control
|
|
|
Brush DC motors are mechanically commutated motors that are good for high speed applications where responsiveness and small package size is needed. Brush DC motors are easy to drive and cost effective when long life is not required.
|
|
MODEL SERIES - DC42/ DC52
PMDC GEARED MOTOR
Design - Motor DC42/DC52 is a heavy duty carbon brush DC motor which is used in combination with GBW gearhead only. Gearhead GBW contains heavily loaded steel gear wheels. The spur gears are fixed on steel spindles which are hardened and polished to a mirror finish & rotate in sintered bushings. The thick output shaft rotates in robust sintered bushings. All the gears are housed in between metal plates & closed by plastic dust cover. All bearings are permanently lubricated and therefore require no maintenance. Linear drive also possible on request.
|
|
4-Pole Electrical Designs for High Current Capability
Ball Bearing Construction for Heavier Load and Long Life Capability
High Efficiency Permanent Magnet Designs
Rugged Welded Clip for Magnet Retention, Not Glued
Castings Designed for Maximum Heat Dissipation
1/4 HP - 4HP, up to 5000 RPM, 12-72 VDC
|
|
Johnson Motor Universal motor
Dimensions: Ø 54 x 10, shaft Ø 4.5 mm
Supply: nominal 120 VAC
Torque:
@ rated load 25 mNm
@ max. efficiency 25.22 mNm
@ max. power 35.47 mNm
Speed:
@ no load 34427 rpm
@ rated load 13500 rpm
@ max. efficiency 15681 rpm
@ max. power 12530 rpm
Power:
input @ rated load 95 W
input @ max. efficiency 95 W
output @ rated load 36 W
output @ max. efficiency 41.51 W
Max. current:
@ no load 0.38 A
@ rated load 0.83 A
@ max. efficiency 0.96 A
@ max. power 1.16 A
|
|
Johnson Motor Universal motor
Dimensions: Ø 61.8 x 106.2, flat 53, shaft Ø 8.005 mm
Supply: nominal 230 VAC
Torque:
@ stall 0 mNm
@ rated load 156 mNm
@ max. efficiency 289.89 mNm
@ max. power 413.56 mNm
Speed:
@ no load 24900 rpm
@ rated load 17100 rpm
@ max. efficiency 14300 rpm
@ max. power 11800 rpm
Power:
input @ rated load 518 W
input @ max. efficiency 773.5 W
output @ rated load 280 W
output @ max. efficiency 433.7 W
output @ max. power 498.6 W
Max. current:
@ no load 1.17 A
@ rated load 2.61 A
@ max. efficiency 3.65 A
@ max. power 4.64 A
|
|
| ... products without technical information |
| |
|
|
DC electric motors
