|
|
Miniature Coreless DC Motor
Diameter Ø 4 to 18
Voltage 3 to 12 v
Gearbox Spur or Planetary gear box is available.
Feedback device : Encoder, Taco generator are available
Application
* Locomotion
* Electrical Key Lock system
* Robot
* Medical pump
* CCTV
|
|
These miniature coreless DC motors are a marvel of modern engineering! They combine rare earth magnets with a coreless design to produce high speed motor down to 4mmm in diameter. They feature a sintered bronze bearing to support the output shaft. Due to their minute size these motors are finding increasing applications in models, miniature toys, medical instruments and many miniaturised consumer applications.
Precision Microdrives offers stock supply from single units to production volumes with a simple online ordering system for easy procurement for development. From selection to procurement in 15 minutes. Customisation and ancilliary work such as shaft lenghts and connectors can be arranged for production supply.
|
|
|
Canon Precision's coreless motors create high power output from a small package. Their low moment of inertia provides quick response rates and high controllability. Our coreless motors have demonstrated their high reliability in many applications including cameras and pumps. Customization, like the addition of reduction gears, is available.
|
|
|
|
|
|
The main strengths of Baumüller disc motors are that they are compact and flat. In their shortest design, only 36.5 mm of axial space is required.
GDM DC disc motors
Baumüller DC disc motors are permanent magnet motors with ironless rotors and barrel commutators, meaning that they are low in inertia and highly dynamic throughout the whole speed range.
DSM brushless disc motors
For applications where DC motors (with their associated commutator and carbon brushes) are unsuitable, brushless disc motors are ideal. The additional electrical control required for any special applications can also be incorporated in the motor housing.
GDM 75 - 12 - DC Disc Motors
Compact, flat design
Low in inertia and highly dynamic throughout the whole speed range
Precise true run even at minimum speeds
Can be overloaded to several times its rated value for a brief period
Minimal wear of carbon brushes, meaning that maintenance costs can be reduced
Very well suited to high-speed start/stop operation
For low powers up to 150 W
Permanently excited DC motors with ironless rotors
Available with tachogenerator, pulse encoder, holding brake, and gearbox as options
Insulation class F, type of protection IP44 (higher types available on request)
For low and medium powers up to 4500 W
|
|
DC Electric micro -motor
*DC Brushless motor
Diameter Ø 1.5 mm to 22mm
Voltage : 3 to 24 v
Driver is available.
Spur gearbox or Planetry gearbox and feedback device are available
-Applicaion
Endscope
catheter
Medical robot
Micro actuator
|
|
|
These motors are a marvel of modern engineering! They combine rare earth magnets with a coreless design to produce high torque motor with diameters ranging from 4mm to 36mm. They feature a sintered bronze bearing to support the output shaft. Originally designed for vibration functions in mobile phones, these come without the weight and are finding increasing applications in models, miniature toys, medical instruments and many miniaturised consumer applications.
|
|
Canon's 26mm Gear Head Motor
Rated Voltage: 12V
Gear Ratios: 1/20-1/410
Rated Load: 58mNm – 294mNm
Rated Speed: 15 r/min – 245 r/min
Rated Current: 170mA – 342mA
Starting Torque: .25Nm- 3.23Nm
Canon will gladly attempt modifications to achieve the exact speed, power and current required of your application.
|
|
Permanent magnet DC motors available in sizes ranging
from 30 up to 2500 W (1/25 up to 4 HP).
* MP 56 :
Permanent magnets
N° of pole: 2
Duty: S1 - S2 - S3
Protection class:
IP2O - IP44Power supply:
12V - 24V - 36V - 48V - 180V
Power output: from 15W up to 200W
Brush housing: totally enclosed / fast replacement / external column
Electromagnetic brake available
* MP 80 :
FEATURES :
Permanent magnets
N° of pole: 2-4
Duty: S1 - S2 - S3
Protection class:
IP2O - IP44
Power supply:
12V - 24V - 36V - 48V - 180V
Power output: from 200W up to 750W
Brush housing: totally enclosed / fast replacement
Electromagnetic brake available
* MP 100 :
FEATURES :
Permanent magnets
N° of pole: 4
Duty: S1 - S2 - S3
Protection class:
IP2O - IP44
Power supply:
12V - 24V - 36V - 48V
Power output: from 550W up to 1500W
Brush housing: fast replacement
Electromagnetic brake available
|
|
|
Motor selection is made easy with the wide variety of products available from AMETEK. Many different motor families are available in standard configurations. These motors range in torque from 0.8 oz. in. (.568 Ncm) to 50.0 oz. in. (35.5 Ncm). Voltage options are from 6.00 VDC to 76.40 VDC.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
Modular, high quality drive solutions, specially designed for
a variety of industries and applications such as:
• Mechanical handling
• Medical industry
• Industrial automation
• Door automation
• Automotive
• Office equipment
• Pumps and Compressors
• Packaging and food industry.
As a premier supplier of high precision drive
technology, Dunker offers four product groups:
• BLDC motors
• BRDC motors
• AC motors
• Geared motors
Standardised motors and modular accessories
are available with a high degree of
flexibility to address specific
requirements.
The drive’s power ranges from 1 to
300 Watts. The motor range is further complemented by
high quality components:
• Planetary and Worm gearboxes
• Optical and magnetic encoders
• Tachogenerators
• Electro-magnetic brakes
• Electronic control systems.
Dunkermotoren offers cost-effective and reliable solutions.
|
|
|
These NEMA frame DC motors include permanent magnet designs through 5 HP and wound field designs through 500 HP designed for adjustable speed operation from SCR controls. Applications include conveyors, extruders, winders, printing presses and metering pumps. Most designs are constructed so a tachometer may be added for closed loop applications. Permanent magnet and wound field designs for 90 or 180 VDC have a 20:1 constant torque speed range.
|
|
|
DC motors: STOCK SERVICE Programm can be purchased in small quantities from 1 W up to 100 W and customized versions upon receipt of your firm order, we can produce the motor you need,
|
|
|
|
|
|
Range between 1 and 200 W with a voltage of 12, 24 or 48V
Diameter between 24 and 63mm
Rated speed between 2000 and 4000 rpm
Lifetime of 3000 to 4000 hours
Ability to incorporate: CEM filter, optical or magnetic encoders and brakes
Comply with European Directives 73/23/CEE low voltage and EMC 89/336 CEE
Gearbox range : A nominal torque up to 5Nm with over 10 versions (ovoid, double ovoid, special for peristaltic pumps,65x65 mm square 5Nm …).Available with various output shafts and mechanical interfaces for a perfect adaptation.
90 º gearbox : Designed for applications where space and noise is critical. Very quiet
Planetary gearbox : : Up to 25 Nm nominal, high efficiency, high reduction ratios, available in 1,2 and 3 stages, a compact design with diameters of 42 and 52 mm.
Specially designed for the following markets :
Water treatment: Pumps, valves, pool equipment
Medical: Laboratory equipment, medical pumps, radiology
Access Control: Automatic doors, gates, ramps
Air Conditioning: gas valve, teams HVAC, solar panels
Industrial Machinery: Automatic movements, robotics
|
|
A range of 12 to 180 Volt DC motors with power outputs of 25 to 750 watts.
Including:
PM36 Custom permanent magnet motors up to 75 watts
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts.
minimum order quantity: 100 units per annum
|
|
High efficiency DC commutator motors can be used as traction motors, to drive hydraulic pumps for various applications, particularly in material handling and the automotive and transport industries, and for other applications, such as winches, industrial cleaning machines and marine applications.
|
|
Johnson Motor Permanent DC (PMDC) motors Ø 23.0 ~ 25.9 mm
Dimensions: Ø 24.2 x 30.5, shaft Ø 2 mm
Supply nominal: 21 VDC
Torque:
@ stall 44.11 mNm
@ max. efficiency 7.47 mNm
@ max. power 22.05 mNm
@ constant 5.105 mNm/A
Speed:
@ no load 31090 rpm
@ max. efficiency 25824 rpm
@ max. power 15545 rpm
Max. current:
@ no load 0.32 A
@ stall 7.67 A
@ max. efficiency 1.56 A
@ max. power 4.00 A
|
|
Johnson Motor Permanent DC (PMDC) motors
Dimensions: Ø 80 x 82.4, shaft Ø 8.005 mm
Supply nominal 19.2 VDC
Torque:
@ stall 1469 mNm
@ max. efficiency 289.33 mNm
@ max. power 734.35 mNm
@ constant 10.953 mNm/A
Speed:
@ no load 18800 rpm
@ max. efficiency 15100 rpm
@ max. power 9400 rpm
Power:
@ max. efficiency 456.66W
@ max. power 721.49 W
Max. current:
@ no load 8.587 A
@ stall 142.674 A
@ max. efficiency 35.001 A
@ max. power 75.63 A
|
|
Lenze DC shunt-wound motors can be ideally matched to specific machine tasks because they enable you to select precisely the right degree of protection, type of winding, type of construction and the appropriate built-on accessories.
MGFQ shunt motor
High power density as a result of the square design and internal cooling, IP 23S degree of protection, standard dimensions for gearbox mounting, additional modular built-on accessories. Power ratings from 0.33 to 90.8 kW.
more >>
MGFRK shunt motor
IP 54 degree of protection, fully compensated, IEC standard housing, sizes 90 to 160, variable additional modular built-on accessories. Power range 0.33 to 27 kW.
more >>
Permanent magnet motor 13.120
High power density smooth-bodied design and naturally ventilated, enclosure IP 54, standard measures for gearbox mounting, additional built-on accessories in modular system, powers from 0.055 to 0.6 kW.
|
|
DC MOTORS
- Battery powered:
MBT : Low voltage enclosed DC motors
- Network powered:
MFA-MF : Enclosed DC motors - Magnet inductor (MFA) or wound (MF)
LSK : Open DC motors - Wound inductor
MS1-MS2 : Open DC motors - Wound inductor
Guaranteed availability - Please determine reception date!!!
|
|
|
Permanent Magnet Motors and Servo Motors - Extremely quiet running | Optimum protection (IP 65 optional) | Highest reliability | Custom designed for your application
|
|
MOTORI - Serie 76(Ø76)
Tensione nominale 12÷48V
Giri a vuoto(g/min) 1000÷5000
Potenza resa 5÷90W.
|
|
MOTORS Series Ø42
Supply voltage 12÷48V
No lead speed (rpm) 1500÷5000
Shaft power 5÷50W.
|
|
MOTORI - Serie 62 (Ø62)
Tensione nominale 12÷48V
Giri a vuoto(g/min) 1000÷5000
Potenza resa 5÷80W.
|
|
MOTORI - Serie 90 (Ø90)
Tensione nominale 12÷48V
Giri a vuoto(g/min) 1000÷5000
Potenza resa 20÷150W.
|
|
Monoph tensions. 110/120V – 220/240V 50Hz. Triph. 230/400V 50Hz.
Special tensions and frequencies on request.
Engines Classifies “ F” – on closed rolls of the dice, lubricated with life.
2 directions of rotation into Mono or 3PH. (Except SD21MIW with ring).
Reducers tight and lubricated with life. Entirely on rolls of the dice, screw
without end out of steel treated and polished, final wheel in composite or bronze on
ask. Assembly multiposition.
Flexible connections Wire PVC 30cm or box on terminals on request, (standard
on SD29MIW and SD38MIW).
Details of the Performances Engine Page 6.
|
|
Key Attributes and Characteristics:
- Frame sizes from 8mm (0.31 in.) to 35mm (1.38 in.)
- Speeds up to 12,000rpm
- Torque range of 0.64 mNM (0.09 oz. in.) to 115 mNm (16.3 oz. in.)
- Low power consumption ratings
- Ironless rotor
- Central stator magnet
- Compact bearings
- Precious metal commutation system
- Copper-graphite commutation
Advantages:
- High acceleration
- High efficiency
- Low losses and low electromagnetic interference
Portescap Brush DC motors can be customized with options such as gearboxes, connectors and cables, custom coil designs and more.
|
|
|
Our explosion-proof D.C. motors, series « S », were designed according to european standards CENELEC and are manufactured in order to offer the maximum of safety and reability for all services in explosive atmospheres.
|
|
|
|
DC electric motors
