|
|
| Products 211 to 240 of 277 |
|
|
|
|
Galil's CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port and individual CDS-3310 units may be connected on a distributed network and programmed as a single controller. The communication burden is minimized because the host PC only has to talk with the master CDS-3310, which in turn communicates with the other CDS-3310 on the network.
The CDS-3310 incorporates a 32-bit microcomputer and provides such advanced features as PID compensation with velocity and acceleration feedforward, program memory with multitasking for simultaneously running up to eight programs, and uncommitted I/O for synchronizing motion with external events. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and ECAM. As with all Galil controllers, programming the CDS-3310 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, and the ActiveX Tool Kit for Visual Basic users.
|
|
|
The DMC-1417 for the PCI bus is a member of the Econo Series, Galil's family of single-axis motion controllers which are half the size and half the price of multi-axis controllers. The DMC-1417 can handle the most demanding applications with such features as an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and ecam. Programming the DMC-1417 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit. The Econo Series controllers do not include uncommitted analog inputs and are not optoisolated. Use the DMC-1810 Optima controller if you require these features.
|
|
|
The NSC-1 Series motion controller is a powerful single axis machine control system which combines a bipolar microstepping driver with a programmable controller into a compact envelope. The motion controller can operate as a stand-alone system through the RS-232 port. It utilizes a 32-bit microprocessor to control the trajectory profile, acceleration, velocity, deceleration. Our controller is commanded using virtually any programming language to pass simple ASCII command strings to the controller through the RS-232 port. If closed loop moition control is required, the NSC-1 can be expanded to handle differential inputs from an encoder. The NSC-1 comes with a 120VAC power adapter.
|
|
|
|
|
|
SINAMICS S110 Safety Integrated
Within the SINAMICS drive family, SINAMICS S110 is the single-axis drive for basic positioning tasks.
It comprises an extensive safety package that helps protect both personnel and machines. This safety package is extremely efficient and cost effective as the safety functions are completely integrated into the drive system. In addition, your machine can be safely and practically operated under all required operating conditions. For instance, in the setup and test modes with open protective door.
The scope of functions comprises the following:
* Functions to safely stop drives
* Functions to safely monitor motion
Product features
* Functions to protect personnel and machines
* Short response times as it is integrated in the drive system
* Can be used in all operating modes
* Replaces external electromechanical devices
* Certification according to EN 61508, SIL 2 and EN ISO 13849-1, PL d. in prep.
Safety Integrated functions for SINAMICS S110
The safety functions of SINAMICS S110 can communicate with the process via safety-relevant input/output signals. Alternatively, communication can be established via the fieldbus with the safety-relevant PROFIsafe profile.
|
|
|
Yaskawa single-axis controllers, or application modules, integrally mount to Yaskawa amplifiers to add positioning and communication features. This modular approach reduces integration costs by eliminating amplifier to controller wiring and improves performance by distributing position control to the point of the amplifier. The NS300, NS500, and NS600 provide simple positioning driven by digital I/O, serial, or fieldbus communication.The MP940 and LEGEND-MC offer the ultimate flexibility for complex move profiles tightly integrated to machine I/O.
|
|
|
|
|
|
All synchronization controllers shown on this site operate according to the Master- Slave principle. Where the Master can freely move with any motion profile under control of any remote speed reference, the synchronizer will control one or several Slaves to exactly follow the Master motion in terms of position and speed.
The control is based on incremental position feedback by means of encoders on both sides. Many applications just use a measuring wheel with encoder instead of a Master drive. It is possible to preset every speed or gear ratio by means of adjustable impulse scaling factors.
All units can accept marker pulses from the encoders and from remote proximity switches or photocells, to automatically produce the correct position with pitch or cycle related applications. motrona synchronous controllers can operate with any kind of speed variable drives (AC- inverter, DC, Servo or hydraulic type) that follow to a +/-10V speed reference signal. The extremely fast position control loop provides excellent performance even with highly dynamic applications
|
|
|
|
|
|
The POSYS® 3004 (Designed & Made in Germany) is a PC/104 form factor board dedicated to high performance motion control applications with extensive interpolation functionality. The POSYS® 3004 is designed to control up to 4 axes of servo and stepper motors and provides hardware linear, circular, Bit Pattern and continuous interpolation which allow to perform the most complex motion profiles. Update rates per axis do not exist as each axis runs in absolute real-time mode simultaneously which makes these boards to one of the best performing motion controllers for up to 4 axes in the market.
The POSYS® 3004 in addition provides an on-board DOS-like RTOS with 8 MB SDRAM and 8 MB Flash RAM with integrated Web, FTP and Telnet server for communication purposes via the x3 RS232/RS485 serial, x1 Ethernet, x1 USB1.1 or x2 CAN 2.0b interface which enhances this board for a variety of connection solutions. This allows maintenance, executing, monitoring, updating and diagnostics to be performed easily via network, field bus, Internet or Intranet. The multitasking capability allows up to 12 tasks to be executed simultaneously. Together with the CoDeSys IEC 61131-3 Runtime library integrated, this board can be used for almost any kind of motion control application. An optional switch allows to choose between pure PC/104-Bus (Option; ISA-Bus) communication or any of the other communication possibilities which can be used in parallel mode.
|
|
|
|
|
|
The DMC-40x0 motion controller is Galil's highest performance, stand-alone motion controller. It belongs to Galil's latest generation motion controller family: the Accelera Series, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as fast as 40 microseconds-10 times the speed of prior generation controllers.
The DMC-40x0 is a full-featured motion controller packaged with optional multi-axis drives in a compact, metal enclosure. The unit operates stand-alone or interfaces to a PC with Ethernet 10/100Base-T or RS232. The controller includes optically isolated I/O, high-power outputs capable of driving brakes or relays, and analog inputs for interfacing to analog sensors. The DMC-40x0 controller and drive unit accepts power from a single 20-80 VDC source. The DMC-40x0 is available in one through eight-axis formats, and each axis is user-configurable for stepper or servo motor operation.
Like all Galil controllers, programming the DMC-40x0 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, and an ActiveX Tool Kit for Visual Basic users.
|
|
Stand-alone NC's offer the user a set of standard resources (controlled axes, inputs, outputs, serial channels, etc.) which, following Robox's expertise, represent a least common multiple for a variety of motion control applications. The main advantages of stand-alone architectures are the following:
- optimum performance/cost ratio
- minimum overall dimensions
- ease of servicing by replacing the complete NC
- high noise rejection.
Their disadvantages are striclty related to the stand-alone architecture, but they are easily bypassed connecting to their synchronous and asynchronous serial ports the required additional resources.
List of available products for the selected category:
* RBXE Motion controller (4 axes)
* RBXE_C Motion controller (4 axes) with Canbus interface
* RBXE_P Motion controller (4 axes) with Profibus interface
* RMC Motion controller (32 axes)
* RMC2 Motion controller (2 axes)
* RMC4 Motion controller (4 axes)
* µRMC Motion controller (32 axes)
|
|
|
Trust Automation Motion Controllers are powerful, utilizing today's latest technology to provide a robust high quality yet cost effective product for controlling motion systems. Our core technology has evolved through our custom system work, available today in our new line standard controllers. Check back for new developments or ask us about your application specific requirements.
|
|
The R256 is a compact step motor driver and controller which is designed as a stand-alone option to the integrated motor/controller. This product offers the user the option to daisy-chain up to 16 of these units to meet multi-axis application demand. In addition, the R256 offers the user the ability to query various existing parameters such as the microstepping resolution, current position as well as the various speed settings. Visit www.LinEngineering.com today!
Features:
2.0 Amp Chopper (PWM) Driver with Controls
Operates from 12 to 40 VDC
Microstep resolution from ½ to 256 microsteps
Two digital I/O's and two fixed inputs
Stand alone operation with no PC
Single 4 wire bus linking up to 16 units
Fully programmable speeds, current, and acceleration
Stores up to 16 different programs (4kbytes of memory)
|
|
|
|
|
|
AB425S: universal control unit machine drives for 1 servo motor and 2 stepping motors
- Control unit for Efka DC1500 or DC1550 motor
- and 2 stepping motors Efka SM200 and SM 250
- or 3. party products up to 60V and 5A phase current
- User customized programming of individual and even complex functional sequences in a higher programming language for specially designed sewing workplaces and sewing automats using Efka C200 compiler
- Synchronous operation of all drives
- X/Y function
- USB port for data storage uploading and downloading
- Updates via USB with email possible
- Flash technology, no EPROM
- Digital parameter setting directly on the control unit
- Programmable light barrier functions
- Integrated tread monitor function
- A range of HMI: Variocontrol V850 und VarioTouch V900
- 29 short-circuit proof outputs
- 28 digital inputs freely programmable
- 2 analog inputs
- 2 digital / analog converter output (0-10V)
- Operating hours counter
- Machine operating time monitoring with optical or acoustic signal for maintenance
- Expandable to other Efka drives via CANefka
|
|
| ... products without technical information |
| |
|
|
Servo drives and motion controllers
