Servo-drives and servo-amplifiers

125 companies | 497 products

A compact servo drive from the DIAS Drive 1000 series can control up to 6 motors. In addition to the housing, the drive regulators also share the controller, intermediate circuit and heat sink. Not only can the construction volume be reduced and the stability increased, the equipment costs are also lowered. The 6-axis device measures only 21 cm in width, 59 cm in height and has an...

DC 061: Servo Amplifier in Pocket Format

12.5 x 103.5 x 72 mm. Those are the dimensions of the super-compact, fully integrated servo amplifier from SIGMATEK's S-DIAS series. The DC 061, with a power rating of nearly 300 W, is designed to control a synchronous servo motor up to 6 Amperes of continuous current at 48 V DC. Over short period of time, the DC 061 can even output a peak current...

The DIAS Drive 300 Series is a robust structure with up to three axles in a...

The DIAS Drive 100 series is a modular and very compact servo drive system that has optimized power loss and was especially designed for use in multi-axial applications. It can cater up to eight servo axes per system. There are...

{{productDetail[13981]}}

The Ndrive® series of digital servo amplifiers are designed for use specifically with the Automation 3200 motion controller. These are high quality and productivity discrete drives that can be used to control brushless,...

Ideally built for storage sensitive applications, the Ndrive CP PWM Digital Amplifier is a low power, small footprint drive that offers versatile control systems for brushless,...

The Ndrive® family of digital servo amplifiers represent high performance discrete drives used with the Automation 3200 motion controller. The drives are capable of controlling brushless, DC brush, and stepper motors over a wide range of operating voltages and currents....

The Ndrive® family of digital servo amplifiers represents a range of high-performance discrete drives that are intended for an Automation 3200 motion controller. They are capable of very smooth motion profiles due to the use of double-precision...

The Ndrive® family of digital servo amplifiers from Aerotech is an automation 3200 motion controller with high performance discrete drives. They control dc...

{{productDetail[9101]}}

Moog's Multi-Axis Servo Drive (MSD) is an ideal system intended for a machine's increase in productivity and viability. It encompasses both modular and single-axis servo drive...

The Moog PITCHmaster® II+ Pitch Servo Drive is a very tough and hard device that is designed especially for operating conditions that are abrasive and are found in places such as rotor hubs of wind turbines. The Servo Driver is simplified into an axis box with its high integration...

The Moog Wind Turbine Pitch Servo Drive PITCHmaster II is an advanced interface used in most of Moog's pitch systems. It optimizes on and offshore wind turbines....

The DS2000 is a fully enhanced full digital brushless servodrive. It offers an optimal solution for reliability, speed and accuracy to machine builders due to its enhance control features and well-conceptualized...

If you are in need of a digital stand-alone motion control drive with extremely customized interface, the DS200XP Servodrive is the best choice in the market today. This highly advanced device features...

{{productDetail[222]}}

The PS 90 is a universal position control unit that is modular and offers flexible configuration to the application field. This powerful device is capable of controlling maximum 9 axes and is divided in two groups with three axes in each group. This...

{{productDetail[36067]}}

The Pilz servo amplifiers serve as a drive controller in achieving the...

{{productDetail[7550]}}

Portescap's high performing servo drive and digital amplifier is suitable for both small and large...

The Portescap Brushless servo-controller is specifically designed for utilization in...

{{productDetail[24824]}}

The 200V RS2 Advanced Servo Drive offers detailed accuracy and lesser cycle course which covers a quick response of 1200 Hz along with vibration control, faster positioning...

The 200V RS1 Servo Drive is a cost-effective, easy-to-use and setup equipment ensuring enhanced precision and minimized cycle time. It utilizes latest auto-tuning algorithm...

Main Features :

(1) Easy setup for optimal operation
Auto-tuning
5-digit LEDs
Setup software

(2) Improved precision...

The 400V RS1C from Sanyo Denki is an ac servo drive that has a CANopen interface. It is specially used for robots, printing,...

RR1A Multi-axis drives are input drives operating at maximum 1600W rated power, an input voltage of 1 x 200-230 VAC 50/60 Hz or 3 x 200-230...

{{productDetail[8104]}}

The LECSA/B/C/S, AC Servo Motor Driver by SMC has the capability to enhance transferring...

{{productDetail[82491]}}

The EMERSON Digitax ST series is used primarily for pulse duty servo applications in industries requiring high peak torque. Its been optimized to be used with Unimotor hd servo motors.

Digitax...

{{productDetail[8355]}}

The VLT® AutomationDrive utilizes a single-drive concept for complete application range coverage, which speeds up and simplifies the commissioning, operation and maintenance of the unit. This unit...

The Danfoss VLT® Decentral Drive FCD 302 comes with a number of new performance functions including an open loop operation of the permanent magnet motors. This unit is based on the...

Combining high performing permanent magnet or PM synchronous servo motors and drive electronics in one enclosure, the VLT® Integrated...

{{productDetail[88]}}

Wittenstein AG servo amplifier is a high-quality, high-performance amplifier for motion control. It is mostly used for sine-commutated servomotors. It can operate with continuous, peak power...

{{productDetail[6209]}}

The AKD PDMM® combines one AKD servo axis and a master controller that supports up to seven or more additional...

The AKD® BASIC Series provides all the performance features of our AKD Series, along with built-in machine...

The decentralized drive system consists of a central power supply and robust IP67 rated servo drives, which are placed nearby the motor. The system offers everything that is needed for the...

Growing demands on safety and productivity combined with ease of use, uncompromised reliability and fast time to market are just some of today’s challenges facing machine builders and process engineers. With standard safety functions including STO (Safe Torque Off) and optional expansion cards for SIl 2 and SIl 3 that offer ’Safe Stop’, ’Safe Limited Speed’ and Safe...

The Kollmorgen AKD® Series includes a complete range of Ethernet-based servo drives that are fast, feature-rich,...

{{productDetail[24821]}}

The ADV200 is a range of panel-mounted inverters designed as a compact, ready for use solution fully compatible with the maximum operating conditions...

The series of ADV100 inverters, manufactured by GEFRAN, is particularly designed for providing top flexibility applications for modern automation systems. This field-oriented inverter...

The ADV50 is a sensorless vector that has V/f or sensor-less control with SPWM modulation. It is ideal for applications like in roller door, small elevator, escalator, parking device, X-Y axis of travelling crane; dumpling...

The inverter SIEIDrive – ADV20 series has all the characteristic that modern industrial process controls need, within a single product. At the same time they are in compliance with the needs atypical to...

The AVRy series inverter offers the latest technology to meet the high demands of today’s civil lift engineering sector.
It’s the single solution that provides cutting edge control...

{{productDetail[7132]}}

The BGE 3508 is a comapct 4-quadrant controller from Dunkermotoren that is designed to control brushless or brushed DC-motors. It is packaged with a PC-software...

{{productDetail[14411]}}

Heidrive has on offer HeiControl servo-drive controllers type HCE, These are 4-Q drive controllers...

The HCF Series is composed of DC servo drives developed by Heidrive GmbH. They are regulators...

{{productDetail[14066]}}

The ECOVARIO® Series is composed of digital servo amplifiers developed by Jenaer Antriebstechnik. They have a peak...

2-Axes Servo Amplifiers ECOMiniDual

Single-PCB solution for integration on customer side
Dimensions: 100 x 120 mm
Digital torque,...

{{productDetail[18428]}}

The Gold Whistle is a DC digital servo-drive that requires 80 - 1 600 W. It is a digital servo drive that offers up to 1.6 kW of continuous power or 3.2 kW of peak power. This advanced high density servo drive is...

The Digital servo drive DC Gold Solo Whistle Series is manufactured by Elmo Motion Control ltd. The product has ultra-compact design and it has high power density supply. The product is also very efficient...

The Gold DC whistle is a small digital servo drive that can be installed on a wall and weighs 267 grams. This device can deliver a standard power capacity of 1.6 W and a maximum of 3.2...

The Gold -Duo is a portable digital servo drive solution which contains 2 drives in one product itself. This can be easily mounted on the wall. It weighs as less as 479 g(16.9 oz) and offers up to 2by 1.6 kW of...

The Gold Guitar is a highly advanced small PCB-mountable package that utilizes a very flexible drive in addition to impressive power density. The unit features advanced networking plus built-in safety, and it comes...

{{productDetail[123145]}}

The IDM 1/ECO 1, manufactured by Otto Suhner AG, is an axis control system used as a turnkey or component kit. The device can be operated on...

{{productDetail[66196]}}

Tolomatic servor drivers and servo controllers are capable of delivering optimum operation...

{{productDetail[7066]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation