|
|
Fiber optic cables can be made in different lengths with different type of connectors, such as SMA905, ST or FC/PC connectors. The fibers are also available for different wavelength regions, like Deep UV solarization resistant fibers, UV/VIS fibers and VIS/NIR fibers.
We offer different shielding, like Kevlar reinforced PVC sleeving with PTFE inner tubing (standard) or metal shielding with PVC-XY or PTFE inner tubing for higher temperature and more industrial applications.
Depending on the intended wavelength range a UV/VIS (200-800 nm) or a VIS/NIR (350-2000 nm) fiber is used. In the following table replace xx by respectively UV or IR. For deep UV use specify -SR (solarization resistant).
|
|
The Business Unit Telecom of BRUGG CABLE can supply all the accessories needed for optical fibre networks as LAN, MAN and WAN systems.
The range of products includes all the material needed for installing indoor and outdoor cables, into 19" racks and cabinets or for fitting them to walls, masts etc..
|
|
|
OFS offers an entire product line based on its flagship 200 µm HCS Optical Fiber Cables. This popular and versatile multimode fiber employs a rugged hard clad silica which both protects the fiber mechanically and allows it to be quickly and easily terminated using crimp-and-cleave connectors. OFS's 200 µm HCS cables are recommended for use with most industry-standard communications protocols and can be easily connectorized with standard V-Pin, ST, SMA, and F07 connectors. Additionally, we offer kits containing all the tools necessary to perform terminations in the field and test those connections with an Insertion Loss Test Kit.
|
|
|
A new fiber and termination system in the popular 62.5 µm size makes on-site crimp & cleave connectorization possible. These optical fibers are drop-in compatible with other 62.5 configurations and offer superior connector retention and performance--maximum bandwidth with minimal insertion loss. Our 62.5 µm products are rugged, easily terminated, yet still cost-effective. ST or SMA connectors can be directly crimped to the cladding. Additionally, we offer kits containing all the tools necessary to perform terminations in the field and test those connections with an Insertion Loss Test Kit.
|
|
FIBRE MANAGEMENT IN CABINET, PATCH PANELS & DRAWER
Chapter A
Optical Fibre Splice Tray Lid
Managed with Radius Control and Dark Fibre Storage
Plain with Basic Storage Facility
Optical Fibre Splice Tray Hinge and Holder
Array Tray and Isolator Clips
Fibre Clips and Coupler Clips
Optical Fibre and Ribbon Fibre Splice Protector
900 Micron Buffered 15-Way Fibre Clip
Optical Fibre Flat Manifold
Strain Relief Boot - 900 Micron Fibre
Quick Panel Mount Strain Relief Gland and Slot In Version
900 Micron Boot and Short Buffered Fibre Boot
Optical Fibre Coiling Clip
Chain Plate
Optical Fibre Support Base, Network Saddle and Expandable Bracket
Dust Caps with Flexible Ties or Metal Chains
Optical Fibre Connector Cutout Adaptor and Cover
Snap Latch
8-Way SC Adapter
|
|
Fibre Management
Richco has an extensive range of fibre optic products which meet the requirements of telecom and datacom applications at all levels of fibre optic equipment. Our products provide fibre optic storage, protection, transportation, and installation.
Optical fibre is the future for communications into the 21st century. However, optical fibres are vulnerable, particularly in application areas where fibre breakout is required. It is here that transient losses and dB loss can occur and cause signal failure and data errors, which is costly.
Richco’s fibre management and protection products have been designed to eliminate the potential hazards such as macro and micro bends resulting from the mishandling of optical fibres during installation, maintenance and upgrade.
|
|
FIBRE MANAGEMENT AT PCB LEVEL Chapter C
Fibre Reels
Optical Fibre Segment (90 Degree / 30mm Radius)
Fibre Reel Stand-off
Corner Guide, Straight Guide
Mini Optical Fibre Network Saddle, on Base, Arrowhead, 2 Prong
Micro Wire Saddle, Standoff, On Base, Locking Fix, Teardrop
Wire Saddle - Snap Rivet, with Arrowhead
Locking Wire Saddle, Snap Rivet, with Arrowhead
Wire Saddle Side Entry, on Base, locking
|
|
Today and future communication technology demands fast, efficient and safe performance in the data communication process. Large and complex databanks all interconnected must be able to receive and transmit data without outside interferences. CONEC manufactures an extensive fiber optic connector produce line. The CONEC developed and manufactured fiber optic connectors are the right solution for such complex systems. Also the fiber optic connectors such as PLUG-PLUG combination have the fiber ends incorporated.
In order to achieve accurate and precise connections of the fiber ends, very high quality ceramic components are used. The fiber optic connectors made with precision and high quality ceramic components provide a high reliability connection when used with the various adapters.
The standard fiber optic connector series is available in SC, ST, FC and LC. Type MT-RJ is for use with fiber modem applications. All fiber optic connectors are supplied
|
|
|
Fischer Connectors offers a wide range of fiber optic connector and cable systems. Rugged, they are specifically engineered to withstand difficult operating conditions (outdoor, submarine, or high pressure applications…).
|
|
Differents types of connectors:
LX.5
LC
MU
LSH
SC
SC Duplex
FCPC
LSA (DIN)
ST-LEAN
ST-HQ
FSMA
MT-RJ
ODC
FiberGate
SC-RJ IP67
E-2000
|
|
The optical fiber optics has lot of
advantages in disturbe areas:
- insensitivity to the electric disturbances,
- increase in transmitted information
flow,
this is why, fiber optics division has
developed the optical connector 8038,
based on the 838 series connector,
approved by ABB (Asea Brown Boveri)
according to the German standard
BN 411 012 and the IEC 77 and 571
standards.
|
|
|
These fiber optic cable assemblies are designed to be used in cellular towers. Resistant to harsh environments, Amphenol's outdoor cable assemblies are totally immune to interference, EMI, RFI, and ESD including lightning. Cable assemblies come in 2 and 4 positions and are fully mate-able with Huber & Suhner.
|
|
Single Connector for Polymer Fibres (POF)
advantages:
• No special tools necessary
• Quick, cost-effective assembly
• No crimping, no glueing
• Fixed connection due to metallic type
• Suitable for 1 mm polymer fibre 2.2 mm jacket
|
|
In order to ensure the highest technical performance and to provide the optimum solution for a diversity of applications,
LEMO has developed four types of fibre optic contacts; designated F1, F2, F3, and F4. These contacts are designed to
operate with single fibre, multi fibre, and mixed fibre optical/electrical cable constructions and cater to single and multimode
fibres from 9/125 to 1500 µm diameter.
The choice of fibre optic contacts depends upon the following criteria:
- Cable construction (single fibre, multi fibre, mixed optical/electrical)
- Fibre type (single-mode or multi-mode).
|
|
FIBER OPTIC CONNECTORS
The improved security...resistance to EMI, RFI and EMP...and low transmission losses inherent with fiber optic data transmission systems have resulted in thier increasing use in aerospace, defense and telecommunication applications. G & H Technology has met this growing demand by developing an expanded range of fiber-optic interconnect products incorporating single and multiple mode fiber diameters ranging in sizes from 50 to 1000 microns.
|
|
|
Easy fiber patch & splice connectivity hardware for universal use - rack or wall mounted. Simplify your real world with factory performance stubbed hardware, patch cords and preconectorized cables.
|
|
|
HellermannTyton offers a full range of Fiber Optic connectivity products including patch panels, jacks, faceplates, and patch cords. Continually updated, these products meet the latest industry standards, and aggressive system and product warranties are offered with this line.
|
|
|
|
|
|
Molex's MTP round jacketed ribbon cable assemblies provide easier installation than traditional flat ribbon cables in optical networks. System designers and installers have found it difficult to route flat ribbon cable in complex networks. The use of round ribbon cables allows the installer greater flexibility when routing multiple jacketed cables in dense system networks.
Molex developed a patented transition sleeve which maintains the routing features of the round cable while allowing the cable to be secured to the MTP connector. The primary benefit of the round ribbon cable is realized with the use of multiple ribbons within a single jacket. Stacked ribbons in traditional flat jacketed ribbon cables are prone to piston in relation to each other, causing attenuation in longer cable assemblies. The round ribbon cable prevents the "pistoning" effect by encasing the ribbons in a solid buffer core, preventing them from moving. Fiber counts up to 24 fibers are currently available while development continues on the 48 and 72 fiber versions.
|
|
|
|
|
|
Features:
- Exceed TIA/EIA-568-B.3 requirements
- Insertion loss: 0.3dB average (multimode and singlemode)
- Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode)
- Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
- Part of a complete Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
- Translucent housing assembly is laser marked to identify fiber stub fiber type (9µm, 62.5, 50 or 50X)
- Spring-loaded "Senior" rear pivot latch LC connector
- Quick installation; provide field termination in less than half the time of field polish connectors
- Patented re-termination capability provides yield rates approaching 100%
- Factory pre-polished fiber endface eliminates time-consuming field polishing to reduce installation costs, labor, scrap and the number of tools required
- Cam activated fiber and buffer clamp mechanisms provide superior fiber and buffer retention - less sensitivity to fiber tensile loading
- No separate clamps, tools, or steps are required to secure both the fiber and the buffer
- OptiCam® Termination Tool simplifies tooling and termination, and virtually eliminates operator error by providing visual indication of proper termination after the cam step has been completed
- Cable retention boot assemblies consistently provide higher than industry standard cable retention
- Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
- Fiber cable size: accept 900µm tight-buffered fiber with included boot(s); accepts 1.6mm - 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
- For 250µm coated fiber termination, use 250 micron fiber build-up tube kit or fan-out kits
- Ferrule type: 1.25mm zirconia ceramic (highest durability for repeated matings)
- Use OptiCam® Termination Kit (FCAMKIT)
|
|
|
Greene, Tweed's fiber optic connector products meet and exceed today's demands for fast, secure, reliable and environmentally protected transmissions. Greene, Tweed is the exclusive distributor of Lancer Systems fiber optic connectors to our customers. Our fiber optic connectivity products completely guard against fiber optic terminations from liquids, gases and particulate that irreversibly degrade optical fiber without the need for secondary protection. These connectors are corrosion resistant and hermetically sealed--allowing them to withstand the pressures and conditions of harsh environments where the competition falters.
|
|
|
Amphenol Fiber Optic Products is a premier manufacturer of optical interconnect products. Amphenol's experience in fiber optics dates back more than twenty years when the company developed the first industry standard connector, the SMA. Today we offer a complete line of products including fiber management systems, attenuators, jumpers, couplers, and service node cables which all are designed to the most rigorous industry standards.
|
|
This hermaphrodite connector with 12 separate ferrules is designed for extra harsh environmental requirements.
It can be coupled with an identical connector interface or with a receptacle.
Four additional electrical contacts are possible.
Multi mode and single mode
Detachable alignment sleeve body for easy cleaning
Captive protection cap
Additional protection cover possible
|
|
|
The LISA wall-mounted distribution boxes suit applications where low space is available.
|
|
The MTRJ Field offers an easy system to
upgrade from a standard to an environmental
MTRJ.
- Sealed against fluids and dust (IP67)
- Shock, Vibration proof,
- No cabling operation in field and no
tools required for installation
With the patented RJStop ® system you can use a standard MTRJ patchcord in a metallic plug which will protect it from shocks, dust and fluids. No hazardous field cabling.
This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device for high vibrations.
Optical performance :
- Number of Channel : 1/2/4
- typical Insertion Loss : 0,5db in MM
- Durability 500 mating/unmating cycles
(changes for<0,2 db)
Applications: railway, radars, military headquarters, communication systems on battle fields, naval...
|
|
A rugged yet flexible beam delivery system with patented features for industry-leading reliability and performance
* A standard feature on all new JK™ Series lasers, both pulsed and continuous-wave
* Complete field-retrofittable upgrade packages available for all prior generation JK700 Series lasers
* Plug-In Pre-Aligned (PIPA) coupling eliminates manual fiber alignment, reducing fiber change time requirements from hours to minutes
* Patented termination design helps eliminate back reflection problems when welding highly reflective materials
* Integral fiber monitoring system
* Optional BendLock for robotic applications
* Standard fiber-optic lengths are 5, 10, 15, 30 and 50m
|
|
Pasternack's Fiber-optic cables consist of fine strands of optically pure glass and are designed carry digital information safely over long distances for RF & Microwave applications. Standard cable lengths are 1, 2, 3, 5 meters in length (62.5/125 Multi Mode and 9/125 Single Mode).
Custom-length cable assemblies are available upon request, call or email us today!
|
|
Here you will find the right cable type for every application and for every installation field, e.g. patch distributor, raised floor or Telecom MAN/WAN street cabinets and industrial machine connection as well.
|
|
FIBRE PROTECTION & CABLING SOLUTIONS Chapter B
Optical Fibre Bend Limiting Tubing
Zip Tool for Fibre Bundles
Tube & Pipe Clip
Slotted Multi Bracket
Tube Gripper Saddle
Strain Relief Gland
Cable Breakout Unit
Manifold
Duplexer
Cable and Patch Cord Anchor
Optical Fibre Ties: Wrap-It, Contour Head, Releasable Arrowhead Tie
Self Mount Ties, Tie On Arrowhead, Tie On Base, Screw Mount, Beaded Tie
Flat Tie Holder
|
|
Application :
C41 indoor (C41 : Communication Control Command Computer Intelligence)
C41 outdoor (C41 : Communication Control Command Computer Intelligence)
Navy indoor
In Flight entertainment
In Flight remote control
Trucking
Robotic machining
|
|
|
|
Fiber optics cables and connectors
