|
|
|
The PSSR Universal Patch and Splice Sliding Rack Mount Panel is an excellent choice for applications requiring an extremely compact and easy-to-use design. It is used to patch, or to patch and splice fibers and to provide cross-connection capability. It accommodates up to 24 connections and can use a wide variety of connector types. The panel can be installed in either a 19” or a 23” rack and occupies only 1.75” 1U of rack space. Splice trays and internal fiber management are housed in a sliding drawer that latches securely in both the open and closed positions. Jumpers can exit either to the left or right at the front of the panel.
|
|
FIBRE MANAGEMENT IN CABINET, PATCH PANELS & DRAWER
Optical Fibre Splice Tray Lid
Managed with Radius Control and Dark Fibre Storage
Plain with Basic Storage Facility
Optical Fibre Splice Tray Hinge and Holder
Array Tray and Isolator Clips
Fibre Clips and Coupler Clips
Optical Fibre and Ribbon Fibre Splice Protector
900 Micron Buffered 15-Way Fibre Clip
Optical Fibre Flat Manifold
Strain Relief Boot - 900 Micron Fibre
Quick Panel Mount Strain Relief Gland and Slot In Version
900 Micron Boot and Short Buffered Fibre Boot
Optical Fibre Coiling Clip
Chain Plate
Optical Fibre Support Base, Network Saddle and Expandable Bracket
Dust Caps with Flexible Ties or Metal Chains
Optical Fibre Connector Cutout Adaptor and Cover
Snap Latch
8-Way SC Adapter
|
|
Rare earth doped gain fibers for converting pump light into laser and amplifier signals.
Available in single clad, double clad, and triple clad variants, these fibers have the high brightness, narrow linewidth, and extreme power stability to satisfy the most demanding applications.
|
|
SILICA/HARD POLYMER CLAD Optical Fiber
JTFSH
- High -OH Core
- Hard Cladding
- High NA
Characteristics:
Step Index
Numerical Aperture: 0.37 ± 0.02
Full Acceptance Cone: 43.4 degrees
High -OH Silica Core, Hard Polymer Clad
High -OH Core for Vis-NIR Transmission
Operating Temperature: -65ºC to +125ºC
Proof Tested from 100kpsi to 150kpsi
Optional Acrylate, Nylon, or Hytrel® Buffer
Custom NA's Available
|
|
Fiberguide has been supporting the Original Equipment Manufacturer (OEM) in taking their concepts and ideas to
market since 1977. Our staff of engineers, technical sales professionals and experienced production team unites
in developing that product specific to your individual application. We design and engineer assemblies using not
only our own pure silica core/silica clad, silica core/plastic clad fibers, but borosilicate glass fiber, ESKA™ plastic
optical fiber, fluoride fiber, chalcogenide fiber, erbium-doped fiber and polarization maintaining fiber as well.
Available with numerical apertures (N.A.’s) from 0.12 (full acceptance angle 14°) to 0.66 (full acceptance angle
82°), with the widest range of custom and standard endfittings/connectors and outer jackets to tailor a product
to your technical and economic requisites.
The definition of a fiber optic assembly is “A length of fiber optic cable that has been terminated with a connector,
pigtail or other component.” This could be a single fiber cable terminated with industry standard connectors
on both ends and jacketed in flexible sheathing, to a multi-fiber design consisting of multiple inputs and/or
outputs, each with different cross-section areas and geometries, each requiring a custom machined endfitting
and a heavy duty outer jacket to protect the assembly from being crushed.
|
|
KITS
Amphenol Fiber optic provides termination kits for maintenance on cable assemblies and terminating cable assemblies on single or multiway butt joint and expanded beam connector. These kits contains all necessary tools to terminate connector.
To use the kit with benefits, a minimum training is required.
OTHER FIBER OPTIC PRODUCTS
As part of our Total System Support policy, Amphenol expertise and support are at your service from R&D to prototyping and production of transmission links as well as special devices and cabling or repairs.
|
|
OFS has been leading the industry in
supplying erbium-doped fiber (EDF) products for more than 15 years.
Our broadest range of erbium-doped products in the marketplace serves all your needs, while offering industry-standard and versatile designs in large production volumes.
Custom splice data for the fibers and devices used in your application is available upon request, and OFS offers its own OASiX Optical Ampflifier Simulation System Software to design and predict EDFA performance using the measured characteristics of the specific lots of fiber you purchase.
|
|
|
Perfect for single and multi-channel C- and L-band amplifiers and ASE sources and small form factor devices.
|
|
|
Industry leading tolerances on key spectroscopic parameters ensure lot-to-lot reproducibility.
|
|
Finisar's next generation cable family accelerates 10G Ethernet server connectivity. The cable utilizes fiber optic technology for the transmission of data while reducing the weight, density and power consumption of copper wire.
Key Advantages over copper:
-Lowest weight for high port count architectures
-Small bend radius for easy installment
-Low power consumption enabling a greener datacenter
-Low cost solution for datacenters
|
|
Modern designs for optical fibre cables of the HELUCOM® series exhibit the same robustness as for a copper cable. The cable constructions are selected for optimum protection of the optical fibres in each application.
Within the HELUCOM® series, optical fi bre cables are available with the common fibre types of 50/125m, 62,5/125m and 9/125m. The HELUCOM® optical fibre cables are manufactured in accordance with the standards and regulations of DIN VDE 0888.
|
|
|
The HUBER+SUHNER standard cable range includes a wide assortment for telecom, premises wiring and industry applications
|
|
Transmitting data, signals and images or light for illumination purposes by means of optical fibers has a very promising future. The market is growing, and new applications are repeatedly confronting the manufacturers with fresh technical challenges. This is why LEONI Fiber Optics has specialised fully in the transmission medium of fiber optics. We are thus able to offer you a range of products and services that is unique in its extent and quality.
Single/multimode fibers
POF – polymer optical fibers
PCF – polymer cladded fibers
UV-IR – silica fibers for UV-IR
PM – polarisation maintaining fibers
MIR bundles
Fiber bundles
|
|
Our Laboratory-grade Optical Fiber Assemblies offer high quality at a budget price. These off-the-shelf assemblies include patch cord assemblies in various lengths, solarization-resistant patch cord assemblies, and bifurcated and splitter assemblies.
|
|
FIBER OPTIC CABLES :
Pasternack's Fiber-optic cables consist of fine strands of optically pure glass and are designed carry digital information safely over long distances for RF & Microwave applications. Standard cable lengths are 1, 2, 3, 5 meters in length (62.5/125 Multi Mode and 9/125 Single Mode).
|
|
|
Under mark MULTMEDIA CONNECT, CAE GROUP develops a complère offer dedicated to the networks High Flows: cabling system Category 5th/6, optical networks, Bays and box…
|
|
CMFO4
4" fiber optic markerArticle Number: 597-00042
Part Number: CMFO4
Type: CMF
Part No: T50L0C2
Article No: 111-00445
Heavy Duty Cable Tie, 120 lb. 15.24" Max. Bun. Dia. 4.13" PA66, Black, 50/pk
Part No: T120R0K2
Article No: 112-12060
Cable Tie, 50 lb. 7.9" Max. Bun. Dia. 1.97" PA66, Gray, 100/pk
Part No: T50R8C2
Article No: 111-04870
Cable Tie, 50 lb. 7.9" Max. Bun. Dia. 1.97", PA66, Black, 100/pk
Part No: T50R0C2
Article No: 111-04878
Cable Tie, 50 lb. 7.9" Max. Bun. Dia. 1.97", PA66, Natural, 100/pk
Part No: T50R9C2
Article No: 112-05019
|
|
Nufern designs and manufactures a broad range of specialty optical fiber. From photosensitive fibers to rad-hard fibers to high-power double clad fibers, you can trust Nufern to produce optical fiber to the world's highest standards for quality, reliability, and repeatability.
If you don't find what you need among our standard fiber offerings, we'll be happy to discuss creating a custom fiber.
|
|
|
Fiber-optic cable required for connecting the hardware components of a VersioBus servo network or a VersioBus I/O network. Required for IM-300 I/O modules in any interface system, or for DC-150 servo modules in the VersioBus interface system.
|
|
General description
The ZLynx CX-4 product is part of the ZLynx family of fully integrated optical active cables, where the opticalelectrical conversion is integrated into the end cable connectors. The ZLynx family is built on Zarlink's industryleading arrayed photonics, IC components and proprietary interconnect optical alignment technology.
The ZLynx CX-4, ZL60615 product is specifically designed for connection to industry-standard 4-wide I/O electrical high-speed powered CX4/IB ports. The product is plug-and-play into these powered ports and eliminates the need for customer re-design work. It provides the customer with all the advantages of an optical fiber solution without the worry of having to deal with the physical optical interconnection, the only connection being electrical.
|
|
|
Optical Fiber, part of Corning’s telecommunications segment, is the world’s leading producer of optical fiber and continues to lead the telecommunications industry in the development of new fiber designs and technology, offering a full line of single-mode and multimode optical fibers for all network applications.
|
|
Draka Comteq offers a wide range of fibre optic outdoor cables with state-of-the art fibres. All desired cables can be produced with gradient or single mode fibres according to national or international standards and requirements. The full range of Draka Comteq fibre cables is at your service.
Draka Comteq being an internationally approved supplier serves numerous small and big customer world-wide. For example a wide range of fibre optic cables are produced for and sold to German PTT / Deutsche Telekom AG (specification TS 0000/12.98) and German Railways / Deutschen Bahn AG (specification Dlk 1.011.003 y).
|
|
Gore provides high performance fiber optic cables for military, aerospace and communication applications. Traditional fiber optic cables negatively affect the optical stability of a bare fiber. The Gore product line incorporates a patented expanded PTFE buffer system that effectively decouples the optical fiber from other cable elements. As a result, optical performance of a Gore cable closely approximates that of a bare optical fiber, even under mechanical or thermal stresses.
Gore is partnering with Deutsch Ltd. to distribute Deutsch Fiber Optic Connectors within the United States and Canada. Gore will continue to offer GORETM Fiber Optic Assemblies with various connector options including Deutsch connectors.
|
|
OSI PreCONNECT® and OSI PreCONNECT® HDCS are products developed by OSI Fiber-Optics which present an integral system solution for structured cabling purposes, in which the components are designed to fit together in an optimal way.
|
|
Fibre-optic (FO) cables should be your first choice for applications in tough industrial environments when you need long transmission paths (up to 120 km!), if you need to take account of EMC issues or if you must ensure electrical isolation in the case of potential differences.
|
|
TELECOMMUNICATION OPTICAL FIBRE CABLES
In 1982, Cabelte was the first optical fibre cables manufacturer in Portugal. Since then, in the whole world one is observing an increased use of optical transmissions in face of its high information transport capacity.
The optical fibre cables range can be divided in two areas:
- Insulated cables
- OPGW cables
|
|
An international standard, SERCOS is an acronym for SErial Realtime COmmunications System, a digital motion control bus that interconnects motion controls, drives, I/Os, sensors and actuators for numerically controlled machines and systems. It is an open controller-to-intelligent digital device interface, designed for high-speed serial communication of standardized closed-loop real-time data over a noise-immune, fiber optic ring (SERCOS l & ll) or Industrial Ethernet cable (SERCOS lll).
The SERCOS interface offers more than 500 standardized parameters that describe the interaction of drives and controls in terms independent of any manufacturer. This rich instruction set provides for communication of commands, parameters, status, and diagnostics, handing many different types of systems. SERCOS also includes features for I/0 control that often allow a machine builder to dispense with the need for a separate I/0 bus.
The SERCOS interface greatly reduces connectivity problems in control systems. It can connect up to 254 drives to a control using one fiber optic cable ring or a single daisy-chained Industrial Ethernet cable. A comparable traditional analog servo system with 8 axes of motion may require over 100 wires between the drive and control.
|
|
Fiber Optic & Capillary Assemblies
- Low Fiber Count Assemblies
- Cable Design Options
- High Power Laser Connectors
- Bundles
- Capillary Assemblies
Assemblies can include optical, electrical, mechanical and fluid functions in a single, unit. Combining optical fibers, mechanical holding and mounting hardware and fused silica capillaries, they may be used to transfer and/or manipulate light and/or fluids from one position to another. Most assemblies are based on specific user requirements. These can vary in complexity from a single, finished, optical fiber (with or without end-terminations) to a complex, branching assembly, combining the advantages of fused silica light guides and/or fluid guides, into an integral unit.
Optical fiber or fused silica capillaries can be clustered into bundles at one end and fanned-out into various configurations at the opposite end. Special end shapes can be micro-machined directly onto the optical fiber or capillary, saving bonding and coupling losses. Termination style and technique, jacketing, and fiber type can be specified to ensure optimum system performance.
Polymicro offers the system designer unparalleled flexibility to incorporate a wide range of design options into their assemblies.
Note: Polymicro Technologies manuafacturers optical fiber cable, components and assemblies only. Polymicro Technologies does not design, manufacture or market any medical devices.
|
|
|
|
Fiber optics cables and connectors
