|
|
For Applying:
epoxy resins
polyurethane resins
silicones
adhesives
Advantages:
-Smooth adjustable mixing ratio
-Exact volume and mixing ratio, no loss of material
-Optimum of industrial hygiene
-Avoid hazardous waste
-High precision dosing system
-Saving of time
-Easy to operate
|
|
|
|
|
|
Patriot Chopper/Saturator
The MVP Patriot™ Standard Output System delivers power, versatility and unprecedented precision to the composites production process.
3:1 or 7:1 output system
Highly Accurate Patriot Technology
Increased Efficiency
Improved Product Quality
Modular Versatility
The Patriot™ Chop/Wetout system delivers unprecedented presion, power, versatility and rugged construction for long lasting use, Rapid Access Design (RAD) for easy maintenance, and reliable performance. This is the one the other guys compare themselves to.
The Patriot™ Chop/Wetout system is a versatile pumping system that addresses many of the problems experienced in composites material application. If your goal is to make quality parts with minimal overspray and greatly reduce waste materials, then the precision of this system is what you need.
Precision counts. The key to efficient FRP production is achieving a uniform laminate. Precise metering is the key to correct many of the quality issues, such as porosity, inconsistent thickness and more that currently face composites manufactures. With a catalyst-to-resin variance ratio of 1% or less, the Patriot™ chop system runs circles around competitive systems that tested with variance ratios of 25% - 30%.
Superior Construction. The Patriot™ Chop/Wetout System features a deep induction heat hardened Fluid Section which is then coated with a thick hard chrome layer to increase the wear characteristics of the system, allowing it to run for longer periods.
Both the Fluid Section and Catalyst Pump on Patriot™ feature the new "self-healing" seal that has the lowest coefficients of friction available today. This seal does not require packing adjustments, and greatly reduces the problems associated with heat buildup and wear.
Patriot™ is designed and built with modular components to create the optimum configuration for your needs. Utilizing quick-change components extends the system life and allows for reduced down time. The major components change out in 10 minutes or less.
If you are looking to take your chopping operation to the next level, the Patriot™ Chop/Wetout System is the best move you can make.
|
|
|
This WOLFANGEL® unit was conceived for the processing of low viscose fluid plastics. In this case, a PU glue had to be dosed for the glueing of stone tiles. The processing pressure is about 100 bar as the glue has to go through a 7,5 m long material hose before being delivered to the processing head with a capacity of 5 kg/min. Due to the short pot life, the material cannot be heated for the reduction of the viscosity.
|
|
|
This WOLFANGEL® unit was conceived for the vacuum infusion process, where, at the beginning of the process, a great amount of material is required. The capacity is 50 kg/min. Resin, catalyst and accelerator (or inhibitor) are delivered by 3 material pumps. The particular advantage of this plant is that it can process preaccelerated resin. The reaction process of the resin system can be adjusted to an optimum to the temperatures of the environment so that the possibilities of adjustment are improved compared to a preaccelerated system. This concept can also be used for epoxy dosing units.
|
|
2400 Series dispensers bring exceptional process control to a wide variety of benchtop dispensing processes where adhesives, lubricants, silicones, epoxies and other assembly fluids are applied.
By using a digital timer and a precision air regulator instead of operator judgement to control the amount of fluid applied, 2400 Series dispensers make it simple to produce uniform dots as small as 0.004 inches in diameter, apply neat controlled beads, or fill cavities with identical volumes of material
|
|
Not only the right choice of adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our offer:
Cartridge dispensing machines
Quasi volumetric dispensing machines
Tank dispensing machines
Special dispensing machines
Accessories
|
|
|
ITW Dynatec's Manual Adhesive Applicators are hand-held hot melt adhesive applicators which dispense hot melt adhesive onto a substrate via manual activation of a trigger. The DGII applicators are electrically heated independent of the adhesive supply hose. Temperatures are controlled by the controller at the adhesive supply unit.
|
|
|
|
|
|
EFD's new Ultra® 2400 workstation is a precision dispensing system that applies accurate, consistent amounts of adhesives, lubricants, silicones, epoxies and other fluids used in benchtop assembly processes - from neat, controlled beads to uniform dots as small as 0.004 inches in diameter.
Several accessories are available to enhance productivity and customize the Ultra 2400 workstation for different applications. Options include a flexible task light, a 1.7X magnifier for precision closeup work, a flexible syringe barrel holder that acts as a convenient "third hand," and an ergonomic barrel grip with a touch-sensor finger switch and LED spotlight to illuminate the dispensing area.
Standard features include
- Simultaneous digital display of dispense time, air pressure, vacuum, shot count and mode, for greater process control than standard analog gauges
- A unique internal pressure reservoir that reduces cycle time and improves deposit control
- Multilingual display in English, German, French, Spanish, Italian, Chinese, Korean and Japanese
- Automatic voltage regulation from 85 to 265 volts, with universal power plugs
- Automatic U.S./metric conversion of all dispensing parameters
- Security lockout with tamper-proof password control
|
|
|
Extremely fast cycling electromagnetic Guns for non-contact application of glue dots. Small footprint with integrated tip sealer which protects the nozzle from drying during stops and a max. cycles rate to 1000 cycles/sec.
|
|
|
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
|
|
Description:
The CO.RA.VR8V is indicated for the continuous feeding of powders, guaranteeing an extremely uniform dosage, while the electric “Brushless” motor, complete with codifier and comanded by a PLC, ensures a precise dosage.
|
|
|
The 754 aseptic valve features a smooth fluid flow path that is free of entrapment areas. FDA-compliant wetted parts are made of 316L Stainless Steel and Teflon(*), making the valve suitable for Clean-in-Place and Sterilize-in-Place processes.
|
|
Satellite Paste Applicators are designed to complement an existing heat source, such as furnace or induction. These freestanding units apply single, multiple, or "ring shape" paste deposits onto assemblies. Cycling is automatic and error-free with an operator removing the pasted part and loading it into the adjoining heat source.
Applicator guns can also be mounted to a robot to apply a detailed combination of paste dots and stripes to a particular part. After the pasting cycle, the part is joined to its companion members and fixtured to the subsequent heating and cooling sequence.
Dual station system utilizes rotating mandrel technique to apply 360° stripe of Fusion Paste onto part joint area.
|
|
|
|
|
|
APS300
Automated Pourer Stacker
The APS300 is a compact automated pourer/stacker designed to provide an efficient hands-free plate preparation. Easy to use, the APS300 ensures a high level of productivity, traceability and security at a moderate cost. All user interfaces and features will help to increase productivity and provide optimal working conditions. For total traceability, the optional ink-jet printer prints directly on the side of the petri plates.
Single carousel with a capacity of 320 plates Ø 55 or Ø 90 mm
Pouring rate up to 750 Petri dishes per hour
Hands-free and automated operation
Easy programming, alphanumerical display and keypad
Store up to 40 user programs
Easy-Load pump for fast tubing loading
Intelligent alarm management
Optional ink jet printer for perfect traceability on the side of the Petri dish
Optional ticket printer
Specific versions for the food, water and clinical laboratories available
The APS300 has been designed to pour and stack automatically up to 320 Petri dishes without any operator intervention once the carousel has been loaded and the programme started. Inverted plates are simply ignored and stacked empty without any operation interruption.
The transfer disc can be easily removed for cleaning
|
|
|
|
|
|
MEDIAJET - reliable walk-away media dispensing system
The MEDIAJET media filling system offers the unique flexibility to fill Petri dishes as well as test tubes of various sizes.
The compact MEDIAJET provides truly reliable, walk-away operation. The dish guidance system is monitored throughout the filling process. Operational downtime due to 'dish jams' resulting from variations of the Petri dishes is completely eliminated. The MEDIAJET vario device version can be converted easily from filling Ø 90 mm dishes to fill Ø 60 mm or Ø 35 mm dishes. Furthermore, the MEDIAJET includes a shaker mode for facilitating pour plate applications. The MEDIAJET is the perfect complementation to the MEDIACLAVE media preparator.
Special features:
- Controlled dish guidance for reliable walk-away operation
- Fast Petri dish processing for filling up to 900 plates per hour.
- Processing of various dish sizes (Ø 90, 60 or 35 mm) and dish heights.
- Biplate option for filling two-compartment Petri dishes.
- Shaker mode for pour plate applications.
- TUBEFILLER option for the filling of up to 1000 test tubes in one hour.
|
|
Do you supply to certified laboratories?
Petriswiss PS 900P with integrated label printer guarantees individual labelling on each dish and meets all traceability requirements.
For direct printing on the dish a professional Inkjet solution is aviable.
|
|
SPECIAL
This product line gathers all automated or semi-automated systems, designed and built for complete or partial applications, on specific request for custom equipment, syandalone or integrated.
|
|
DATRON PR 1750
Versatile and flexible
With the volumetric dispensing systems PR 1750 DATRON offers a precise 3 axes portal system of a modular and compact set-up. Innovative axial systems combined with a special control system result in high dynamics. Dispensing speeds up to 20 m/min (333 mm/s) can be achieved. The user-friendly set-up as well as special dispensing accessories ensure minimum setup and programming times and thus high economic efficiency.
|
|
|
|
|
|
All the different types of FRICKE dosing systems are based on the same high quality technology and equipped with a uniform Software. This guarantees maximum compatibility and, as a result, high profitability.
Each machine offers you the most varied possibilities and combinations to improve your production process. One system can be equipped with different size valves to achieve a maximum in speed and accuracy. Productivity is further increased by the use of several scales in one system.
- dosing valves with a 60 l/min. flow speed
- up to 16 fully automatic mixing recipes during the unattended night shift
- scale sizes: 300/600 kgs
- parallel dosing on several scales
- valve sizes from DN 15 to DN 32
- fast adaptation to dosing containers between 75 litres and 600 litres
- barcode assisted dosing
- individual container transport systems
- integrated, environmentally sound extraction system directly at the dosing point
- various storage concepts
- stainless steel pipework
- stainless steel storage tanks
|
|
Economy models in the 111 Series hold from 30 to 90 cubic feet of loosefill. Heavy-duty 211 Series deluxe models have 60-160 cu.ft. capacity.
Dispensing valve choices are the Square Valve® with a 49-square-inch opening and the six-inch Scissor Valve which rotates 360 degrees. Additional valves and tubing are available.
Streamline packing operations. A FLO-PACKER® dispenser eliminates loosefill waste by automatically returning overflow material into its storage bag for reuse. The FLO-PACKER dispenser's 140 cu.ft. capacity means fewer refills, and the auto return lets dispenser bags be filled without lowering. Stand-alone unit adapts to any packing line. Just put it in place, plug it in and it's ready.
|
|
|
|
|
|
All you need is here
epMotion automated pipetting systems will make you see things in a new light. Whether it's sample or reagent transfer, assay set-up or nucleic acid extraction, all your routine pipetting tasks will be automated with more precision and safety than you ever experienced before with manual pipetting. With four models, two instrument sizes and multiple pipetting deck combinations to choose from, epMotion is the perfect companion for your workload.
epMotion automated pipetting is unique
* Flexible - Unlimited applications from cell culture to qPCR in 96, 384-well or single tubes
* Accurate - From 1 µl to 1000 µl - the most accurate automated pipetting solution available
* Easy to use - Ready to go in less than one day – installation and full training in one morning
Feel safe it's Eppendorf
epMotion automated pipetting is the natural step. It's precision is based on the successful Eppendorf pipetting technology. Since introducing piston stroke pipetting technology in 1961 Eppendorf has become the leader in pipetting. Accuracy and quality - epMotion inherited our genes.
Why automated pipetting?
* Reproducibility over millions of pipetted samples
* More precise than manual pipetting
* Frees lab personnel from the bench
* Easier to handle than complex robotic systems
|
|
|
UltraSpense 2000 is the answer to the increasing demand for an automated yet affordable dispenser for 96 and 384 well microplates. High accuracy and precision dispensing into deep well or low profile microplates, coupled with low dead volume and easy programming makes UltraSpense 2000 the ideal solution for virtually all dispensing applications. Dispense a wide range of solvents, acids, bases and other aggressive liquids with confidence through the completely inert liquids path. Optimize performance for a wide viscosity range through the adjustable pump speed. Ultraspense is very fast and accurate; dispense 100 ìl into each well of a 96 well plate within 14 seconds with better than 0.5% C.V. precision.
|
|
|
|
|
|
Dispense heads
Internal, round flat, triangular flat, combi type dispense heads
General description
O.D.L. dispense heads can function with all the fittings of the same system. They are specially designed and constructed to keep both size and weight as compact as possible, while ensuring the necessary opening run and gas closure sealing.
O.D.L. dispense heads are very easy to assemble and dismantle and all parts are interchangeable with warehouse spare parts.
Cleaning may be undertaken with all the specific products and equipment normally in use.
Materials
All the parts in contact with the beer or other liquid to be tapped are made of AISI 300 stainless steel; the body and the other parts which are not in direct contact with the liquid are made of nickel-plated brass.
The seals are made of nitrilic rubber or silicon (materials conforming to Italian Law No. 108 dated 25-01-92; EEC Directive 89/109).
Technical characteristics
Operating pressure: 1-4 bar
MAX operational pressure: 70° C for long periods and 110° C for short periods
Test pressure: 6 bar
Approved by SK
|
|
Pistol-Grip Attachment allows paste to be applied manually to copper and brass assembly
Compressed air from control panel is introduced to upper gun body, forcing circular piston and attached piston rod upward against coil spring. Pressurized paste alloy (from reservoir) fills vacant space between piston rod tip and nozzle orifice.
As timer de-energizes, compressed air is exhausted, and coil spring returns piston and rod to closed position. Piston rod tip displaces paste alloy through nozzle orifice and seals opening until next cycle. Precise deposit size is obtained by adjusting control panel timer, paste pressure, and length of piston rod stroke.
|
|
|
Carbonators for the production of soda, also with plastic head. Available on various diameter. Non return valves single or double
|
|
Chemical feed systems are especially suitable for metering:
sodium hypochlorie, flocculants, softeners, cleaning agents, acids, caustics, etc.
Fields of application:
• Water works
• Potable water treatment systems
• Swimming pool
• Feed water system
• Sewage treatment plants
• Chemical industry
A complete chemical feed system consits of:
• Diaphragm dosing pump
• Tank
• Armatures, e.g. hand mixer, back pressure regulating valve, pulsation dampener, injection fitting.
|
|
Dosing Computers Types EK
- Dosing computer for the addition of EXADOS dosing solutions against corrosion
and to prevent scaling
- Volume-controlled
- Dosing capacity 100 ml/m³
- Pipe-mounting or wall-mounting
- Displays for operation, dosing and empty-alarm
- Type EK 6 complete with 3-liter-bottle
- Types ES and EGS with suction lance
- Nominal pressure PN 10
- DVGW-certified
|
|
This automated filling system represents a cost-effective solution by replacing manual operations with state-of-the-art laboratory equipment for rapid and accurate filling.
Consisting of a high precision dispenser (PM05) and a highly repeatable robotic module (XY500), it ensures the automated filling of tubes, bottles, impedance cells, etc. for greatly enhanced laboratory productivity.
Print-out of all dispensing parameters complies with GLP and EN 45001 (option).
The system dispenses any type of liquid into two 252 tube racks in a complete cycle. The unique quick-load system developed by AES Laboratoire reduces loading time by eliminating unnecessary handling of tubes.
|
|
752V Series
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
|
|
Dispensing: Equipment, Accessories
