Expansion joints

76 Industrial products | 35 Companies
 
 
DEKOMTE de Temple Kompensator - Technik GmbH
Fabric expansion joint  DIN 4102 DEKOMTE de Temple Kompensator - Technik GmbH

DEKOMTE supplies quality fabric expansion joints. Many different materials of the highest quality are used for this. In principle, fabric expansion joints are best for gaseous media, such as air, exhaust gases or solvent fumes, for operation below the dew point (also with a percentage ...

Metal expansion joint  DN 15 - 6 000 DEKOMTE de Temple Kompensator - Technik GmbH

DN 15 to DN 6000. From DN 250 intermediate sizes can be manufactured without considerable additional costs.
Rectangular expansion joints can be manufactured in any size.

Materials

The materials used are carbon steel ...

PTFE expansion joint  DN 15 - 600 | R-LD series DEKOMTE de Temple Kompensator - Technik GmbH

PTFE multi-laminated tubes, that ensure an absolute minimum porosity and a homogenous wall-thickness, are transformed again under temperature and pressure to special high-quality bellows, with a high vacuum- and pressure resistance, ...

Red Valve
Expansion joint  1 - 108", max. 400 °F | J1 Red Valve

Alleviate piping stress, noise and vibration
Permit axial compression and elongation
Permit lateral and angular movement
Are non-corrosive and abrasion-resistant elastomers
Full face integral flanges, no gaskets necessary
Sizes 1" to 108"
Heavy-duty, steel wire reinforced construction
...

Expansion joint  180 - 400 °F Red Valve

Slips over pipe for easy connection
Designed for low pressure systems
Vibration and sound elimination
Absorbs movement in pipeline
No gaskets required
Are non-corrosive and abrasion-resistant
elastomers
Made in U.S.A.

Materials of construction

Mounting Bands
...

Rubber expansion joint  1 - 108", max. 400 °F Red Valve

Connect different pipe sizes
Alleviate piping stress, noise and vibration
Are non-corrosive and abrasion-resistant elastomers
Full face integral flanges, no gaskets necessary
Sizes 1" to 108"
Heavy-duty, ...

James Walker
Expansion joint James Walker

Our expansion joints are made entirely of non-asbestos materials. Their composite ...

PTFE expansion joint  Comflex® James Walker

Single layer joints with an inner surface of PTFE films that are crossed and ...

Rubber expansion joint James Walker

Using James Walker Townson's range of Elastomeric Expansion Joints you get many special features.

These features include:

-Resistance ...

Juntas y compensadores
Metal expansion joint  DN 50 - 2 000, 64 bar, max. 800 °C Juntas y compensadores

Metallic expansion joints are the elements designed to absorb relative movements in pipe systems transporting fluids under high pressure and/or at high temperatures. The basic element of an expansion joint is the bellows, which must be strong enough to withstand the circumferential pressure, and flexible enough to absorb the design deviations as often as necessary.

The balance between strength ...

PTFE expansion joint  1 100 °C Juntas y compensadores

Applications

Fabric expansion joints are highly flexible and lightweight. They absorb expansion movements and vibrations in ducts and pipes handling gaseous media (air, ...

Rubber expansion joint  120", 100 bar Juntas y compensadores

Rubber

Rubber expansion joints are flexible elements made from natural or synthetic elastomers with “tire cord” fabric and metallic reinforcements. By using the most recent advances in the field of synthetic rubber, for extreme chemical and temperature resistance, along with the latest ...

SFZ
Expansion joint  DN 15 - 600, PN 40 SFZ

These expansion joints are designed to take up linear movements in a piping system. The advantage of axial expansion joints is the fact that ...

Metal expansion joint SFZ

We propose a complete range of high security and high performance flexible elements for ...

Rubber expansion joint SFZ

Rubber and plastic expansion joints are commonly used in industrial, OEM and HVAC applications.
Typical examples are:
- Chemical and petrochemical industry
- HVAC installations
- ...

BOA
PTFE expansion joint BOA

Bellows made of PTFE are ageing resistant and almost ...

Rubber expansion joint BOA

Plastic piping has a thermal expansion that might be up to 20x bigger than a comparable steel ...

MANUFACTURAS ORIA
Fabric expansion joint  SAFETECH™ MANUFACTURAS ORIA

In an isolated duct or in a duct system, both the circulating fluid temperature and pressure changes and the atmospheric changes may produce stresses that could quickly destroy the system if there were no elements that provided flexibility to the whole unit.

The solution to these problems is provided by the installation of Expansion Joints. SAFETECH has the means and knowledge to calculate ...

Rubber expansion joint  SAFETECH™ MANUFACTURAS ORIA

A Rubber Expansion Joint is a flexible coupling made of synthetic or natural ...

TECOFI
Rubber expansion joint  5.5 - 13 bar | DI series TECOFI

bENERAL CHARACTERISTICS

EPDM rubber bellow.
Zinc-plated ...

BRADEN
Expansion joint BRADEN

Expansion Joints

Braden Exhaust Expansion Joints provide a point of flexibility in the Exhaust ducts and relieve stress caused by system movement. Expansion joints are an important part of the ductwork since they prevent strain on the structure when it expands by yielding or providing ...

CO.RA. S.r.l.
PTFE expansion joint  Sil CO.RA. S.r.l.

CO.RA. compensators are flexible connecting elements that allow the alignment of two machines, of a pipeline and a machine, ...

Dresser Flow Control
Stainless steel expansion joint  max. 120" | 63 series Dresser Flow Control

Style 63 Expansion Joints are available including single-end (Type 1 and Type 3), and double-end (Type 2 & 4), limited-movement types, flanged, lock ...

ECONEX S.R.L.
Stainless steel expansion joint  1/2" - 2 1/2", 2.5 bar | GMM series ECONEX S.R.L.

Metal flexible joints suitable for the installation of
gas burners, using air under pressure, enable
vibration ...

hnc group A/S
Stainless steel expansion joint hnc group A/S

SaniComp™
A compensator which is especially developed for sanitary productions. The EHEDG-certification means that SaniComp™ are approved for installation in nationally and internationally sanitary industries.

SaniComp™ ...

HUWA international
Expansion joint HUWA international

If a pipeline is subject to a change in length caused by a
change in temperature of the surroundings, by the medium
or if these changes are caused by other circumstances, such
as sinking of the support, the Huwa Expansion Joint is the
ideal tool to absorb forces caused by the change of length.
The HUWA Expansion Joint ...

HydroWer-Hydraulik GmbH
Rubber expansion joint  25 - 100 mm, 3 000 psi HydroWer-Hydraulik GmbH

Elastic pipe couplings for the suction pipe
Nominal width 25-100
Nominal pressure 6 bar - static
Short overall length

With SAE-flanges acc. to Standard J518c-3000 psi
DIN-flanges acc. to DIN Standard 2633-ND16
Pipe thread ...

Novaflex
Expansion joint Novaflex

Novaflex Connectors are custom made to protect your ...

SGL GROUP
PTFE expansion joint SGL GROUP

Dr. Schnabel FLUROFLEX® bellows are manufactured
from virgin paste-extruded POLYFLURON®
PTFE. They are designed for maximum flex-life
in a wide range of high temperature/high purity
Chemical Process Industry (CPI) applications. General
FLUROFLEX® bellows or flexible connectors
or expansion ...

Tianjin IMG Valve Co.Ltd
Expansion joint  DN 65 - 2 400 Tianjin IMG Valve Co.Ltd

Reasonable in design,reliable sealing,excellent performance and good figure
The sealing surfaces of disc and seat are built up welding by iron-base alloy or Sellite ...

Tuf-Lok International
Metal expansion joint  2 - 10", 650 °F | 389 Tuf-Lok International

The Therm-Line all steel expansion joint by Tuf-Lok International has special design features to minimize pressure drop and buildup as a result of excessive leading edges, as it compensates for temperature expansion.

The smooth internal bore allows liquids, solids, liquid with solids or slurries ...

recherche-cat www di En 2012-05-21-24