{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
servo-driven valve / motion control / proportional / high-performance
servo-driven valve
DCV, ACV

Today, machine designers require intelligent support for motion control tasks that incorporate state-of-theart digital valve electronics for flexible integration, high productivity and simple maintenance. For over 60 years, Moog has ...

See the other products
MOOG
cartridge valve / servo-driven / flow control / throttle
cartridge valve
DSHR series

Operating pressure: 350, 420 bar
DN: 40 mm - 160 mm
Flow rate: 1450 l/min - 20550 l/min

Servo Cartridge valves, also known as 2-way valves are throttle valves wherein the stage cone is built with a metallic seat that are used for directional flow control functions and designed to be installed in slip-in cavities. The valves ...

See the other products
MOOG
spool valve / cartridge / servo-driven / flow control
spool valve
SE3 series

Operating pressure: 350 bar
DN: 30 mm - 63 mm
Flow rate: 425 l/min - 1185 l/min

It has a 3-way Servo Cartridge valves with spool design throttle valves that is utilized with flow control tasks. They are built with 3 ports that permits them to be used to extend or retract a single acting cylinder. The valves have ...

See the other products
MOOG
hydraulic valve / servo-driven / control / for wind turbines
hydraulic valve

Temperature: -40 °C - 80 °C
Operating pressure: 250 bar - 350 bar
Flow rate: 75 l/min

Moog Wind Turbine Pitch Valves are axis controlled servo valves, developed for onshore and offshore wind turbines. This valve meets world-class standards due to high performance, long life and easy maintenance, enabling the use of all ...

See the other products
MOOG
direct-operated valve / servo-driven / flow control
direct-operated valve
D636, D637 series

Operating pressure: 350 bar
Flow rate: 5 l/min - 180 l/min

These servo valves are direct-operated, being suitable for analog signals. The operation is powered by a linear force motor and there is no requirement in terms of a pilot flow. The high force range improves the operating limits significantly, ...

See the other products
MOOG
hydraulic solenoid valve / 2-way / pneumatic / normally open
hydraulic solenoid valve

Operating pressure: 500 psi - 6000 psi
Voltage: 18 V - 32 V

The Lee Company has extended the sealing performance of their field proven piloting solenoid valves with the introduction of the new Zero Leak Solenoid Valve. The valve seat incorporates a polymer seal to achieve zero leakage, making ...

See the other products
THE LEE COMPANY
hydraulic valve / shut-off / stainless steel / miniature
hydraulic valve

Operating pressure: 4000 psi

The Lee Company's new 375 Bypass Valve is designed to shunt flow across an actuator piston when the system pressure is either shut off or lost. This miniature valve is normally open, with a hydraulically-actuated pilot-to-close feature. Weighing ...

See the other products
THE LEE COMPANY
flow-control valve / globe / hydraulic
flow-control valve
RCFA, FCFA, FLFA series

Operating pressure: 3000 psi - 8000 psi
DN: 0.19 in - 0.5 in

Lee Flow Control Valves have three different types of flow controls which include directional flow controls, flow regulators, and restrictor checks. These valves offer metered flow in a single direction and ensure continuous flow ...

See the other products
THE LEE COMPANY
shuttle valve / for fluids / hydraulic / miniature
shuttle valve
Sh, SV series

Operating pressure: 3000 psi - 5000 psi

This miniature valve manufactured by Lee comes with 3 ports that are designed to facilitate fluid flow to a common outlet, from one of the two available inlet sources. Because of the reduced size of the valve, it is unlikely that you ...

See the other products
THE LEE COMPANY
shuttle valve / hydraulic / stainless steel / miniature
shuttle valve

Operating pressure: 5000 psi
Flow rate: 2 us gal/min

Used in high-pressure applications with system pressures ranging to 5000 psi, the new shuttle valve from The Lee Company is a state-of-the-art product in its series of miniature detented shuttle valves. 375 Detented Shuttle Valve has ...

See the other products
THE LEE COMPANY
poppet hydraulic directional control valve / hydraulically-operated / 4-way
poppet hydraulic directional control valve

Directional control valves are utilized to regulate the flow of lubricant. This means that a centralized lubrication system is split up into two or more lubrication circuits (channel control). They are also used to switch between intermittent ...

spool hydraulic directional control valve / direct-operated / proportional
spool hydraulic directional control valve
D*FB

Flow rate: 6 l/min - 30 l/min
Operating pressure: 350 bar

seat valve / with membrane / electric / servo-driven
seat valve
VZWM_L

- Connection G1/4 ... G2, also available with NPT thread - Flow rate 1400 ... 31000 l/min; Kv 1,6-39 m³ - Cable connection - Solenoid actuated, servo controlled, pneumatic spring return - For control of gaseous and liquid media - ...

hydraulic valve / load-control
hydraulic valve
800 l/min | V 46

Hägglunds offers a wide range of valves, including single-function and integrated winch models. The latter combines multiple functions for a specific type of system. For closed hydraulic systems, the brand offers an integrated valve ...

hydraulic valve / motion control
hydraulic valve
480 - 2 000 l/min

The main task performed by Hägglunds load control valves is to manage hydraulic systems. These valves ensure perfect tandem between brakes of the loaded hydraulic systems and oil flow going towards the motor. This functionality allows ...

hydraulic valve / load-control
hydraulic valve
600 - 1 000 l/min

Hägglunds motion control valves have various models, depending onthe required functions. Those functions include displacement shift,with yields twice the speed with the same flow of oil, free circulation mode, which enables the motor ...

hydraulic valve / pressure-limiting
hydraulic valve
300 - 1 000 l/min

The Hagglunds pressure limiting valves are used for highly dynamic systems such as extremely heavy loads. These were designed specifically for winches and shredders, but can also be used in applications that have overrunning loads. Connection ...

water valve / float / servo-driven / level control
water valve
21.010.110

Temperature: 60 °C
Operating pressure: 0.3 bar - 10 bar
DN: 10 mm

A.u.K. Müller GmbH & Co. KG float valve nominal diameter DN 10 is useful for controlling level in tanks. When liquid drains out of the tank, the valve is refilled on its own and closes itself upon reaching the maximum level. The lever ...

See the other products
A. u. K. Müller
water valve / float / servo-driven / level control
water valve
21.010.115

Temperature: 60 °C
Operating pressure: 0.3 bar - 10 bar
DN: 10 mm

The FLOAT VALVE, DN 10 is a servo-controlled valve with a nominal diameter DN 10, which closes by using the buoyancy of a floater to control the level in tanks.It is composed of single chamber valves that has a 90 degrees inlet towards ...

See the other products
A. u. K. Müller
potable water valve / float / servo-driven / level control
potable water valve
21.010.126

Temperature: 60 °C
Operating pressure: 0.3 bar - 10 bar
DN: 10 mm

This specific device is a float valve. It is servo controlled and has a diameter of roughly DN 10. Utilizing a floater's buoyancy to manage the liquid levels in tanks, this device closes in a similar fashion. When the maximum liquid ...

See the other products
A. u. K. Müller
potable water valve / float / servo-driven / level control
potable water valve
21.010.226

Temperature: 60 °C
Operating pressure: 0.3 bar - 10 bar
DN: 10 mm

Float valves are known to be extremely useful for various industrial applications. This particular model also has the advantage of easy cleaning and maintaining, simply by draining and isolating the water supply. The product comes ...

See the other products
A. u. K. Müller
water valve / float / servo-driven / level control
water valve
21.013.110

Temperature: 60 °C
Operating pressure: 0.3 bar - 10 bar
DN: 13 mm

Float valves uses a floater's buoyancy to control the liquid levels in tanks. This particular valve is of DN 13 type and is servo controlled. Liquid that has been drained from the tank will refill automatically to certain preset levels. ...

See the other products
A. u. K. Müller
spool hydraulic directional control valve / manual / 4/3-way / base-mounted
spool hydraulic directional control valve
MMV-R4QD-C

Operating pressure: 0 psi - 150 psi

These manually operated rotary valves are 4-way, with 1/4 NPT ports. They are closed center valves, with 3 positions. Tested on pressures from 0 to 150 psig. Flow coefficient is 1.68. Mounting is base type. The operating temperature ...

See the other products
Clippard
hydraulic valve / pressure-limiting / 3-way / heavy-duty
hydraulic valve
MLV-3

Temperature: 32 °F - 230 °F
Operating pressure: 150 psi

The MLV-3 is a 3-way, heavy-duty mini limit valves designed with spring return and air extend motion. This product can be mounted by dual #20 holes or 15/32-32 thread. It features a maximum of 10 to 32 thread ports, 1/8"stern travel, ...

See the other products
Clippard
poppet hydraulic directional control valve / pneumatically-operated / 3/2-way / normally closed
poppet hydraulic directional control valve
MAV-2

Operating pressure: 100 psi

The MAV-2 is a two-way normally-closed valve that uses an air flow of 4.0scfm at 50psig or 6.8scfm at 100psig. It uses a 24-ounce nominal force rate and a 1/8-inch stem. Additional characteristics of the unit include a temperature ...

See the other products
Clippard
poppet hydraulic directional control valve / pneumatically-operated / 3/2-way / normally closed
poppet hydraulic directional control valve
MJV-2

Operating pressure: 300 psi

This product features the miniature 1/8" NPT or G1/8 threaded ports, and 2-way, 3-way and 4-way ported valves. It's also featured as miniature size with high flow poppet or spool designs, has unique low leakage rate on poppet design, ...

See the other products
Clippard
cartridge valve / hydraulic / 2-channel
cartridge valve
GV-2C

The GV-2C from Clippard is primarily a dual-way stem valve with a cartridge-type mounting style, an inlet port, and outlet port in its primary design.

See the other products
Clippard
poppet valve / hydraulic / test-point
poppet valve
621 series

Temperature: -30 °C - 200 °C
Operating pressure: 630 bar

With the new MCS Series 621 test point, Oleotec has designed an innovative and reliable product. Compared to the conventional ball valves with a metal/metal sealing, the poppet valve version with its O-ring sealing represents a leakage ...

poppet valve / hydraulic / test-point / stainless steel
poppet valve

MCS – short for mini control system –defines a complete range of miniature fittings, check couplings and accessories. MCS offers a simple, inexpensive means to check pressure in hydraulic systems. Permanently mounted pressure gauges ...

knife gate valve / for slurry / for abrasive fluids / for corrosive fluids
knife gate valve
Isogate® WB series

Temperature: 0 °C - 120 °C
Operating pressure: 1000000, 150, 1400000 Pa
DN: 80 mm - 1200 mm

Designed as a wide body heavy duty slurry knife gate valve for highly abrasive and corrosive applications. FEATURES Size range 3 through 54 80mm to 1380 mm Maximum working pressure Sizes 3" through 16": 150 psi Sizes 18" through 24": ...

cartridge valve / servo-driven / flow control / 3/3-way
cartridge valve
LRWA series

Temperature: max 50.0 °C
Operating pressure: -0.9 bar - 10 bar

The power supply is 24 VDC +/- 10% stabilized max to 0,8 A with the input specific value of 0-10V vs. 100 kohm; +/- 10V vs. 100 kohm; 0-20 mA vs. 500 ohm and hysteresis and linearity of 1% FS related to slide position. the switching ...

servo-driven valve / pressure-control / 3/3-way
servo-driven valve
LRPA4

Temperature: 0 °C - 50 °C
Operating pressure: 0 bar - 6 bar
DN: 4 mm - 6 mm

This product has a power supply of 24VDC at about 10%, a ripple maximum of 0.5 Vss, and a maximum of 0.8A. It additionally features an input with a specified value of 0-10VDC vs. at 100kohm and 0-20mA vs. at 500ohm. When in position, ...

servo-driven valve / positioning / 3/3-way / for pneumatic cylinders
servo-driven valve
LRXA4

Temperature: max 50.0 °C
Operating pressure: max 10.0 bar

Power supply 24 VDC +/- 10%, ripple max. 0.5 Vss, max. 0,8 A; with slave valve max. 1.6A Input command signal 0-10VDC vs. 100 kohm; 0-20mA vs. 500 ohm; 4-20mA vs. 500 ohm Output "in position" 24 VDC, max. 70 mA, open-collector, short ...

servo-driven valve / flow control / pressure-control / 3/3-way
servo-driven valve
LRxD2 series

Temperature: 0 °C - 50 °C
Operating pressure: -0.9 bar - 10 bar

Power supply 24 VDC +/- 10%, stabilized, max. 0,8 A Control signal +/- 10 V 0-10 V 0-20 mA Hysteresis 1% FS Linearity 1% FS Switching time from 0 to 100%: approx. 5 ms +/- 100%: approx. 7 ms Working temperature from 0 to 50° C Relative ...

ball valve / petroleum / pneumatic / hydraulic
ball valve
ITEM 113

Temperature: -20 °C - 80 °C
Operating pressure: 210 bar
DN: 10 mm - 25 mm

These high-pressure ball valves are used mainly with hydraulic and pneumatic applications. The working temperature range from -20°C to + 80°C. The maximum working pressure is 210 bar. The valves can be used with oils, petroleum and petrochemical ...

distribution valve / rotary / hydraulic
distribution valve
RU033 series

With a total hydraulic rate of 7,500 PSI and a total speed level of 50 rpm, Rotary Systems' Timing Valve eliminates the need for a control or solenoid valve. This valve was specifically manufactured for conditions and situations that ...

spool hydraulic directional control valve
spool hydraulic directional control valve
SG, SP series

Flow rate: 12 l/min - 100 l/min
Operating pressure: 400 bar

Directional spool valves are a type of directional valve. They control the direction of movement and the velocity of single and double-acting hydraulic consumers. The directional spool valve type SG is available as a single valve ...

See the other products
HAWE Hydraulik
spool hydraulic directional control valve / solenoid-operated / proportional / compact
spool hydraulic directional control valve
SW series

Flow rate: 12 l/min - 25 l/min
Operating pressure: 315 bar

Directional spool valves are a type of directional valve. They control the direction of movement and the velocity of single and double-acting hydraulic consumers. The directional spool valve type SWP is available as a manifold mounting ...

See the other products
HAWE Hydraulik
spool hydraulic directional control valve / solenoid-operated / proportional / compact
spool hydraulic directional control valve
SWS series

Flow rate: 25 l/min
Operating pressure: 315 bar

Directional spool valves are a type of directional valve. They control the direction of movement and the velocity of single and double-acting hydraulic consumers. The directional spool valve bank type SWS is available with series ...

See the other products
HAWE Hydraulik
spool hydraulic directional control valve / electro-hydraulic
spool hydraulic directional control valve
HSF series

Flow rate: 80 l/min - 160 l/min
Operating pressure: 400 bar

Directional spool valves are a type of directional valve. They control the direction of movement and the velocity of single and double-acting hydraulic consumers. The directional spool valve type HSF is a manifold mounting valve. ...

See the other products
HAWE Hydraulik
spool hydraulic directional control valve / proportional
spool hydraulic directional control valve
PSLF, PSVF, SLF series

Flow rate: 120 l/min - 1000 l/min
Operating pressure: 400 bar - 420 bar

Proportional directional spool valves are a type of directional valve. They control the direction of movement and the velocity of individual or multiple hydraulic consumers actuated simultaneously. Control is independent of the load ...

See the other products
HAWE Hydraulik
spool hydraulic directional control valve / manual / solenoid-operated / 4/3-way
spool hydraulic directional control valve
VC series

Flow rate: 17 l/min
Operating pressure: 0 Pa - 700 Pa

These Enerpac high pressure hydraulic four-way directional control valves have either solenoid or manual operation. Used for the reliable control of tools and double acting cylinders, the valves are part of the VC, VE and VM Series. ...

See the other products
ENERPAC
spool hydraulic directional control valve / manual / solenoid-operated / 4/3-way
spool hydraulic directional control valve
VM, VE series

Flow rate: 17 l/min
Operating pressure: 0 Pa - 700 Pa

Enerpac high pressure hydraulic, three way, directional control valves. Reliable control of single-acting cylinders and tools. Can be operated manually or with solenoid. Adjustable relief valve on VM and VE-series, featuring several ...

See the other products
ENERPAC
cartridge valve / for oil / hydraulic / sequence
cartridge valve
MVP, WVP series

Operating pressure: 0 Pa - 350 Pa
DN: 0.12 in - 0.25 in
Flow rate: 4 l/min - 10 l/min

The hydraulic sequence valves from Enerpac boast of having exceptional pressure setting. These valves have 2 models- MVPM-5 Sequence Valves with pressure setting between 35-350bar with a lock nut and mounting ports and V-2000 Sequence ...

See the other products
ENERPAC
oil valve / hydraulic / flow control / metering
oil valve
VFC series

Operating pressure: 0 bar - 350 bar
DN: 0.25 in
Flow rate: 0 l/min - 38 l/min

Enerpac flow control valves are capable of providing repeatably precise oil flow control. An internal check valve makes sure the metered flow goes in one direction, while there is free flow in the other. A color coded flow indicator, ...

See the other products
ENERPAC
poppet solenoid valve / directional / oil / hydraulic
poppet solenoid valve
VP series

Operating pressure: 17 bar - 350 bar
DN: 0.25 in
Voltage: 24, 110 V

Modular directional valves, VP-Series: Solenoid-directional valves. Zero internal leakage, due to two poppet valves. Contains inlet check-valves. High cycle switching. Stackable to 8 valve stations high using TRK-series tie-rod kits. Oil ...

See the other products
ENERPAC
poppet valve / for fluids / hydraulic / sequence
poppet valve
max. 20 l/min, max. 350 bar | DZ5E

This is a pressure sequence valve, designed for a spring-loaded poppet and suitable for operation at a pressure that does not exceed 350 bar. As long as users follow this basic requirement, they should achieve a capacity that can ...

See the other products
HYDAC
cartridge valve / for fluids / hydraulic / balancing
cartridge valve
max. 38 l/min, max 350 bar | RS08

HYDAC counterbalance valves are direct-acting poppet valves with integrated checks that enable jerk-free movement on the part of consumers in the presence of over-center loads. It can help in avoiding a hurrying ahead of the consumer ...

See the other products
HYDAC
ball valve / for fluids / hydraulic / isolation
ball valve
MSx series

The HYDAC Pressure gauge is a product of brilliance and superior ingenuity. They are designed to check up to 9 different pressures in a hydraulic system. Selecting each individual measurement point is extremely hassle free as it just ...

See the other products
HYDAC
spool hydraulic directional control valve / lever-operated
spool hydraulic directional control valve
RS 160

Flow rate: 45 l/min
Operating pressure: 250 bar

The RS 160 is a highly-flexible Directional Control Valve with optional spool controls comes with a modular-design and caters to a variety of applications such as outriggers of mobile working machines, wheel loaders and agriculture applications. ...

See the other products
HYDAC
spool hydraulic directional control valve / electro-hydraulic / monobloc
spool hydraulic directional control valve
RM 230 L

Flow rate: 70 l/min
Operating pressure: 210 bar

These open center monoblock valves are directional and feature one to four and six sections with ½" and 1" standard connections. They are ideal for applications with nominal flow rates of 160l/min or less, as well as ...

See the other products
HYDAC
lever-operated hydraulic directional control valve / 3/2-way / 4/2-way
lever-operated hydraulic directional control valve
100971

3-way/4-way, 2-position directional control valve. Ideal for manifold mounting.

hydraulic valve / flow-control / pressure-compensated
hydraulic valve
KFC series

Flow rate: 8, 6, 2, 4 l/min

The KFC 2-8, manufactured by SPX Hydraulic Technologies, are pressure compensated flow controls. They can be used with any KC control valve except KC07 and KC08. They also can be added to DC10 or DC20 power units. They offer nominal ...

hydraulic valve / sequence / pressure reducing
hydraulic valve
100129, 100943, 9613

Operating pressure: 0 psi - 4000 psi
Flow rate: 5 us gal/min

The pressure reducing valves manufactured by SPX Hydraulic Technologies, functions as a sequence valve to control the order of events within the hydraulic system. Operation is carried out through direction of pressure towards the two ...

hydraulic valve / flow divider
hydraulic valve
RHI S-021

Operating pressure: 358 bar
Flow rate: 4 l/min - 45 l/min

Flow divider valves are self-regulating devices, that largely independent of the difference in pressure at the working ports A and B split an input flow QC entering at port C into two equal output flows QA and QB or maintain equal the ...

poppet hydraulic directional control valve / electrically-operated / 2/2-way / 3/2-way
poppet hydraulic directional control valve
C2.360 series

Flow rate: 8 l/min
Operating pressure: 350 bar - 500 bar

This device assembled by Roemheld is a 3-way hydraulic directional control valve that features an electrical operation. It has a connector which consists of a socket adapter. Moreover, it operates with an operating pressure of 500 bar, ...

hydraulic valve / sequence
hydraulic valve
C2.951-1 series

Operating pressure: 500 bar
Flow rate: 8 l/min

The product is comprised of five series valves and one input valve. These are connected through an internal pathway, with an O-ring per valve. For connecting port P from the input valve, one pressure line is sufficient. Certain valve ...

spool hydraulic directional control valve / manual / 4/3-way / compact
spool hydraulic directional control valve
SS

Flow rate: 7 us gal/min

This valve offers unique versatility in a compact, yet rugged valve with extremely low leakage and exceptional load holding capability. Each section incorporates threaded "in" and "out" ports so it may be utilized ...

See the other products
Cross Manufacturing
spool hydraulic directional control valve / lever-operated / 4/3-way / compact
spool hydraulic directional control valve
AD

Flow rate: 15 us gal/min
Operating pressure: 3000 psi

The CROSS SA series directional valve offers differential style relief, load checks and excellent metering in a compact, economical model with parallel flow paths. Features: 3000 psi operating pressure 15 GPM flow rate 7/8-14 (SAE #10) ...

See the other products
Cross Manufacturing
spool hydraulic directional control valve / manual / 4/3-way
spool hydraulic directional control valve
BA

Flow rate: 30 us gal/min
Operating pressure: 2500, 3000 psi

The CROSS SBA series is a 3-pos., 4-way valve in 1,2 or 3 spool versions with float available. The SBA series features NPTF ports and the SBA-ORB has SAE (ORB) ports. The SBS series has 12 volt solenoid (3-position,4-way). Fully balanced ...

See the other products
Cross Manufacturing
spool hydraulic directional control valve / lever-operated / pressure-compensated
spool hydraulic directional control valve
SBC series

Flow rate: 25 us gal/min
Operating pressure: 2500 psi

SBC2S-ORB The CROSS SBC2S, SBC2S-ORB series is a manually adjustable, pressure compensated, priority-type Flow Divider with pressure relief. It provides accurate speed and directional control of motors and cylinders or will operate ...

See the other products
Cross Manufacturing
spool hydraulic directional control valve / lever-operated / 4/3-way
spool hydraulic directional control valve
SCA series

Flow rate: 30 us gal/min
Operating pressure: 2000, 1500 psi

The CROSS SCA2, SCA2-ORB series is a rugged and dependable low cost valve. It is a series type, and is recommended for all general purpose applications except lifting heavy loads in a vertical position. It will operate a double acting ...

See the other products
Cross Manufacturing
cartridge valve / for liquids / hydraulic / shut-off
cartridge valve
max. 350 bar | DVE

Designed for direct installation into hydraulic manifolds, the Cartridge Assembly DVE is a valve that throttles and stops the flow of liquid in both directions. It has a graduated turning knob and coded sprinkle for precise control flow. ...

See the other products
STAUFF
ball valve / hydraulic / flange / with butt weld ends
ball valve
BBVF2A

▪ Two-way high-pressure round body ball valves designed for use as on/off devices for hydraulic applications ▪ With flange connection according to STAUFF standard and butt weld ends ▪ Pressure range: up to 345 bar / 5000 PSI (depending ...

See the other products
STAUFF
SAE hydraulic block
SAE hydraulic block
BF-T

The SAE Block T-Connection (Adapter Style) BF-T yields a total working pressure of 6,000 psi in accordance to ISO 6162-2:2006 standards. This product is made of S355J0 or any similar materials, including a stainless steel 1.4404. The ...

See the other products
STAUFF
SAE hydraulic block
SAE hydraulic block
BC-T

The STAUFF SAE Blocks SAE Block T-Connection ( Connector Style) BC-T comes in two variants of PSI - the 6000 High pressure series and the 3000 Standard Pressure series which are in accordance to to ISO 6162-1. The SAE Blocks use Stainless ...

See the other products
STAUFF
SAE hydraulic block
SAE hydraulic block
BF-L

SAE Block L-Connection (Adapter Style) BF-L features a 3000 PSI General Pressure Series (acc. to ISO 6162-1), 1/2" (DN13), 3-1/2" (DN89) along with 6000 PSI High Pressure Series (acc. to ISO 6162-2), 1/2" (DN13), 2-1/2" (DN64). Additionally ...

See the other products
STAUFF