|
|
* Single-wheel or multi-wheel air classifier for ultrafine classifying operations.
* Superfine powders in the fineness range d97 = 5 to 10 µm;
with the NG model, finenesses of d97 = 2 µm (d50 = 0.3 µm) are possible.
* Spatter-grain-free operation over the entire separation range.
* Integrated coarse material classifier to increase the cut point.
* Low-wear mode of operation.
|
|
|
Sturtevant air classifiers balance the physical principles of centrifugal force, drag force and gravity to generate a high-precision method of classifying particles according to size or density. For dry materials of 100 mesh and smaller, air classification provides the most effective and efficient means for separating a product from a feed stream for dedusting, or for increasing productivity when used in conjunction with grinding equipment. All three Sturtevant air classifiers offer durable construction, as well as time- and energy-saving advantages.
|
|
|
|
|
|
Presenting various types of inline installation type steam and air separators, from models with integral traps to compact stainless steel models. Separates entrained water from fluids as they are transported.
Operating Pressure Range: 0 - 550 psig
Operating Temperature Range: 32 - 650 °F
A separator that forcibly separates out the condensate generated and entrained in pipelines of steam or air, etc.
All models are equipped with a cyclone separator that demonstrates a remarkably high 98% separation efficiency.
The integral trap is a free float type that uses three-point seating, with continuous discharge and a tight seal.
The separator supplies high-quality steam or air from which the condensate has been removed, which has a direct connection to productivity and product quality.
Application Areas
Applications for the Cyclone Separator for Steam
Steam main lines, equipment that uses direct contact with live steam, etc.
Applications for the Cyclone Separator for Air
Air piping, processes requiring dry air.
|
|
The Atritor DCM Mill is one of the most universal milling systems available with independently driven grinding and classifying sections.
It has a wide range of applications producing materials in some instances to less than 15 microns.
Feed material is metered into the mill pneumatically and first passes into the classifier zone where any fraction of the feed that is already inside specification is removed as product, thus avoiding any over-grinding. Oversize is recycled internally to the grinding zone and is returned to the classifier after further size reduction. This process produces a steep size distribution curve.
Adjustment of the classifier speed controls the size of the product leaving the mill. The product is conveyed pneumatically to a collecting cyclone and/or bag filter. With the application of heat to the inlet air flow, simultaneous drying can be undertaken.
|
|
Rhodax crusher
Principle
In-bed compressive grinding
Advantages
On load and on line setting
Non sensitive to tramp iron
Low wear rate
Stable quality of ground product fineness
Selective grinding and classification of the Fines which preserve hard grains.
|
|
| ... products without technical information |
| |
This air curtain is intended for ceiling installation. The compact design of the air curtain allows easy mounting without need for extra parts or brackets. Maintenance is easy and the face grille is nice to look at while comprising the integrated intake and exhaust. The air curtain can be supplied with complete electronic regulation which allowing automatic running, which ensures maximum efficiency and a high level of energy savings. The most frequent use of this unit is in supermarket entrance halls, banks and hotels, restaurants and administrative buildings etc.
SPECIFICATION
- Air curtain lengths: 1.0 m, 1.5 m and 2.0 m
- 2 output ranges with a range of uses for doors up to a height of 7.5 m
with air flow output up to 5 040 m3/h
- Electric heater up to 18 kW, water heater up to 54.5 kW, air only version
- 3-levels of air output, 2-levels of heating output or fully automatic mode
in connection with up to three external switches
- A wide range of other accessories and hanging elements
|
|
Air curtain
Whether as passage barrier, thermal or hygenic bulkheading, as smell barrier or cool air barrier, whether in camps, supermarket, cold-storage depot, industrie or crafts enterprise - the air curtain aero is universally for middle Türöffnungen to 5,000 x 5,000 mm applicable. It offers not only the optimal bulkheading for doorless openings, but guaranteed at the same time brisk and barrier-free maneuvering without starting damage. Beyond that the air curtain saves aero heating costs, since also ranges with high temperature differences without loss of energy are from each other separated.
|
|
| ... products without technical information |
| |
The Atritor DCM Mill is one of the most universal milling systems available with independently driven grinding and classifying sections.
It has a wide range of applications producing materials in some instances to less than 15 microns.
Feed material is metered into the mill pneumatically and first passes into the classifier zone where any fraction of the feed that is already inside specification is removed as product, thus avoiding any over-grinding. Oversize is recycled internally to the grinding zone and is returned to the classifier after further size reduction. This process produces a steep size distribution curve.
Adjustment of the classifier speed controls the size of the product leaving the mill. The product is conveyed pneumatically to a collecting cyclone and/or bag filter. With the application of heat to the inlet air flow, simultaneous drying can be undertaken.
|
|
Rhodax crusher
Principle
In-bed compressive grinding
Advantages
On load and on line setting
Non sensitive to tramp iron
Low wear rate
Stable quality of ground product fineness
Selective grinding and classification of the Fines which preserve hard grains.
|
|
... see all the products in the category
Mills
|
|
|
|
|
The filter elements, including sintered metal powder filters, sintered metal fiber filters, titanium filters and other alloyed filters, are manufactured by isostatic pressing or co-axial pressing via powder metallurgy process. Available materials are: stainless steel 316L, 304L, 904, Titanium, Inconel, Hastelloy, Nickel, Monel and other alloys .etc.on request.
The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It has the type of tube, disc and stack of lamination and so on.
Main Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
Main advantages
1. Good shape stability
2. High mechanical strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes, can be put together by soldering or gluing
7. The service life can be prolonged by cleaning and regenerating process
|
|
FSX SOLUTIONS - Engineered Flanged Filters
Features:
* Coalescing, particulate and hydrocarbon filtration
* Standard flows up to 17,000 SCFM
* Standard flanged connections from 2" to 12"
* Standard and customized models available
* ASME and CRN
Standard models:
* 2" to 12" flanged connections
* Free Standing XZ Series or Inline XT Series Filter
* Stainless steel internal parts for maintenance-free operation
* Differential pressure indicator
* Corrosion allowance
* Automatic Float Drain
Customized models:
* Larger flows/higher pressures
* Stainless steel construction
* Vacuum applications
* Electronic drains
* Activated carbon tower
* Certifications:
Lloyd's Register, ABS, CNR, CPV
|
|
Remove bulk water from your compressed air or gas system
Bulk water, which exists in air or compressed gas systems, causes corrosion of piping, damage to valves, cylinders, pneumatic tools and machinery, and reduces the effectiveness of aftercoolers/heat exchangers. Over 99% of bulk water can be easily and economically removed by installing a type XWS Water Separator. Your compressed air and gas system will operate much more efficiently with reduced downtime and maintenance costs. This upgrade will also improve the effectiveness of aftercoolers, refrigerant dryers, filters and other downstream equipment.
Options:
* Automatic float drain
* External electronic drain
* High pressure versions
* Stainless steel construction
|
|
| ... products without technical information |
| |
|
The Meech Model 958 Sheet Separator system has been designed to allow efficient operation of automatic sheet feeders by eliminating static charges and separating the sheets with a controlled blade of ionised air. The Model 958 system comprises one or more full flow Meech ionising air curtains on adjustable brackets, which are mounted on the cross rod of the feeder. The Model 957 air curtains incorporate Model 915 static elimination bars, which are driven by a Model 904 power supply (refer also to Models 904, 915 and 957 data sheets). The air supply should be equipped with a pressure regulator and 5 micron filter.
|
|
|
The Meech Model 958 Sheet Separator system has been designed to allow efficient operation of automatic sheet feeders by eliminating static charges and separating the sheets with a controlled blade of ionised air. The Model 958 system comprises one or more full flow Meech ionising air curtains on adjustable brackets, which are mounted on the cross rod of the feeder. The Model 957 air curtains incorporate Model 915 static elimination bars, which are driven by a Model 904 power supply (refer also to Models 904, 915 and 957 data sheets). The air supply should be equipped with a pressure regulator and 5 micron filter.
|
|
The Parker oil separator removes oil from system refrigerant by means of a highly efficient coalescing filter. The filter is 98.5% efficient, filtering oil and particles down to 1/10 of a micron while leaving a trace amount of oil necessary for adequate system lubrication. The separator is ideal for recovery and reclaim operations.
|
|
Air compressors, widely used throughout industry, can produce considerable amounts of oil-contaminated condensate. This contamination must not be discharged directly into open drains, public sewers or natural watercourse.
Oil quickly reduces the dissolved oxygen content of water, which sustains animal and plant life and the bacteria essential for the aerobic digestion of sewage in Water Treatment Plants. As a result, most countries now have environmental laws placing strict limits on the discharge of industrial effluent containing oil.
The low cost, effective solution is a SAO oil/water separator from General Air Products. Installed as part of the compressed air system, it simply reduces the oil concentration in the condensate to permitted levels, so that clean water condensate can discharge safely into the drains. This leaves a relatively small amount of concentrated waste oil to be disposed of by the most economic of legitimate means.
|
|
|
|
