|
|
Ball valves suppliers
DN 6 – 100; cock bodies in PVC-U, PP, PVDF (pressure 0 – 10 bar; operating temperature -10 to 80°C), stainless steel (pressure 0 – 60 bar; operating temperature -20 to 600°C), body versions: straight through body (2/2-way valve), T-valve (3/2-way valve); industrial seal materials in FPM, EPDM, PTFE; connections: threaded socket, solvent cement socket, butt weld spigot, flange; manual, pneumatic and motorized operators
|
|
-Diameters from d32-d225
-From d63 with two-steps planetary gear
-Low maintenance
-Long life cycle
-Operating pressure of body 24 bar (testing pressure 36 bar)
-Pressure-resistant and rigid housing without welds
-No change of cross-section and reduction of flow
-Optimum flow design (cavitations, flow noise)
-Free passage for scraping
-Profiled professional seals rinse-proof in open and closed position
-Protection system prevents introduction of soiling and deposits
-Resistance against corrosion
-Higher elastic capacity than e.g. steel
-No cavitations / dead space
-Major energy saving in water supply
|
|
| Cam-Tite manufacturer of ball valves are engineered to provide the very best performance for demanding hazardous and corrosive applications. Designed to overcome such inherent valve problems as high operating torque and stem leakage, Cam-Tite ball cocks feature a unique, non-spherical ball with a bevel at the lip of the port. This configuration minimizes pressure on the seating areas, thus reducing cold flow and prolonging seat life. |
|
| for corrosive and high-purity fluids in chemical, pharmaceutical, semiconductor and industrial application, manual or automated, ISO + ASME/ANSI, up to 200°C (400°F) |
|
1-Piece, Instrumentation, 40 Series Supplier of ball valves
1-Piece, Instrumentation, 40G Series Ball Cocks
2-Piece, Instrumentation 33 Series Ball Valves
3-Piece, Alternative Fuel Service, High Pressure (up to 6000 psig [413 bar])
3-Piece, Instrumentation, High-Pressure (up to 10 000 psig [689 bar]), 83 Series Ball Valves
3-Piece, Multipurpose SK Series Ball Valves
3-Piece, Process / Instrumentation, 60 Series Ball Valves |
|
Two-way and three-way ball valves which can be handled both by hand or through pneumatic and industrial electric actuators.
Pressure interval: 50 bar / 210 bar
Temperature interval: -20ºC / 200ºC
Connections: from 1/4" to 3"
Made in several alloys.
|
|
Series 77 Ball valves supplier feature a high quality 316L investment casting. They are available with sanitary clamp manufacturers or orbital tube OD ends. Select the cavity filled or non-cavity filled design. Superior leak protection is accomplished by using a patented live-loaded packing system featuring Bellville washers and double "V" ring packing. An ISO 5211 mounting pad is provided for easy automation.
Direct Mount, easy to automate
Sizes 1/2'' to 4"
Cavity filled and non-cavity filled
ISO 5211 Mounting Pad
800/1000 PSI
316L Body Ball and Stem Full Port
Sanitary clamp ends or extended tube OD ends
Excellent for Pharmaceutical and food & beverage
Main cock components are made from 316L stainless steel
Body, and ends are 316L CF3M ASTM A-351 investment cast stainless steel
Ball is machined from 316L CF3M ASTMA-351 cast stainless steel
Stem is machined from ASTM A-493 316L bar stock
Full traceability on all wetted parts (MTR's)
Standard internal polish is 15 Ra and is polished to meet ASME BPE specification DT-12 and Table SF-6 as required.
Standard seats TFM (FDA, USP 23 Class VI) TFM (TFM is a trademark of Dyneon)
Stem packing TFM
Full port to I.D. of tubing for reduced pressured drop
Bottom entry 316L pyramidal live loaded blow out proof high cycle stem adjusts to temperature and pressure fluctuation Locked stem nut to prevent loosening after continuous valve actuation
Dual anti-static devices on stem (contact between stem and ball, and stem and valve body)
ISO 5211 direct mounting pad
Direct mount actuation 1/2" to 4"
Handle locking machine when manually actuated
3-piece body construction for ease of repair
Open supplier of bolt design to facilitate full external cleanability
Clamp, extended butt weld, or clamp by extended butt weld.
Clamp end requirements per ASME BPE 2002 DT-10, per table DT-2
Extended butt weld- 316L CF3M ASTM A-351 controlled chemical composition to ASME BPE 2002 table DT-3 and dimensionally per ASME BPE 2002 table DT-4 and DT-5
Please download our brochure for more sizes & tech specs. |
|
| J+J, a UK ISO9001:2000 quality assured valve actuation specialist company, offer a wide range of supplier of ball valves fitted with the J3 reversible IP65 multi-voltage electrical actuators. Cocks offered are brass ball valves, stainless steel ball valves, cast iron ball valves and plastic ball valves. Most are availalble in 2 port and 3 port design. All packages are assembled & tested in-house. |
|
| Rotary plug cocks suitable to control high flow rates with high rangeability. The triple eccentric seat/plug design guarantees zero leakage and low initial breakaway torques when opening and closing. |
|
| Autoclave manufacturer's high-pressure ball valves suppliers have been designed to provide superior quality for maximum performance within a variety of cock styles, sizes, and process connections for pressures to 20,000 psi. Our unique design innovations include an integral one-piece trunnion mounted ball and stem that eliminates the shear failure common in two piece designs, re-torqueable industrial seat glands that result in longer seat life, and lower friction stem professional seal that reduces actuation torque and enhances cycle life. |
|
High Pressure Stop Cock, forged Form with
screwed bonnet and internal stem thread
universal applications.
Typ : AVD, AVI |
|
The GHILUX ball valves manufacturer are shutoff cocks type ON-OFF. The opening and closing functions are made by hand, acting on the control supplier of spindle of the ball with the handle, or operated with a spanner or screwdriving.
The main characteristics of these valves are the different versions and the reduced dimensions, which have been carefully studied
British Gas approved
The ball valves are available in the following sizes:
tube from 6 up to 18;
thread of 1/8 to 3/4.
|
|
The J+J electric manufacturer of actuator is widely used in the plastic cock market because it has a plastic housing making it light in weight, and as it has more standard features than any of its rivals, offers exceptional value.
The new J3 Series supplier of electric actuators offer an LED status light and plug & play conversion kits that change the function from on-off to failsafe, or modulating, or both. |
|
| Cam-Line plastic-lined trunnion manufacturers of ball valves offer the same proven design benefits as the Cam-Tite product line, including tight shut-off, reliable stem sealing, and unsurpassed torque reduction—all unique features in a plastic-lined ball valve design. With special Tefzel or polypropylene linings and option PVDF coatings, Cam-Line ball cocks are well suited for highly corrosive applications within the chemical processing industry such as sulfuric and hydrochloric acid. |
|
-Diameters from d32-d225
-From d63 with two-steps planetary gear
-Low maintenance
-Long life cycle
-Operating pressure of body 24 bar (testing pressure 36 bar)
-Pressure-resistant and rigid housing without welds
-No change of cross-section and reduction of flow
-Optimum flow design (cavitations, flow noise)
-Free passage for scraping
-Profiled professional seals rinse-proof in open and closed position
-Protection system prevents introduction of soiling and deposits
-Resistance against corrosion
-Higher elastic capacity than e.g. steel
-No cavitations / dead space
-Major energy saving in water supply
|
|
1-Piece, Instrumentation, 40 Series Industrial ball valves
1-Piece, Instrumentation, 40G Series Ball Cocks
2-Piece, Instrumentation 33 Series Ball Valves
3-Piece, Alternative Fuel Service, High Pressure (up to 6000 psig [413 bar])
3-Piece, Instrumentation, High-Pressure (up to 10 000 psig [689 bar]), 83 Series Ball Valves
3-Piece, Multipurpose SK Series Ball Valves
3-Piece, Process / Instrumentation, 60 Series Ball Valves |
|
1. Made only from rust proof and acid resistant stainless steel.
2. For a wide range of applications in all industries.
3. No pressure drop due to full flow bore.
4. Easy operation, even under high pressure.
5. Long life due to exchange professional seals.
6. Individually works tested. |
|
M/F B12 SERIES BALL VALVE
Manual, pneumatically actuated, and electrically actuated B Series Ball valves manufacturer are designed to provide positive leak tight shut-off and control of fluids utilized in process and instrumentation applications. The two way cocks provide quick 1/4 turn on-off control of media and the three way valves may be used as diverting or selecting valves.
A broad selection of valve body, industrial seat, and professional seal materials provides a wide range of pressures and temperatures at which the valve may be used.
M/F B2 SERIES BALL VALVE
Manual, pneumatically actuated, and electrically actuated B Series Ball Valves are designed to provide positive leak tight shut-off and control of fluids utilized in process and instrumentation applications. The two way valves provide quick 1/4 turn on-off control of media and the three way valves may be used as diverting or selecting valves.
A broad selection of valve body, seat, and seal materials provides a wide range of pressures and temperatures at which the valve may be used. |
|
3-PC SANITARY SUPPLIER OF BALL VALVE
SS316 BODY, FULL BORE, BUTT WELD OR VICE END
WITH OR WITHOUT POLISH OUTSIDE,
WITH/WITHOUT (DIRECT) MOUNTING PAD ISO5211
1000WOG, USED FOR FOOD/SANITARY PIPE LINE
|
|
TRIFLUX series is available both with L and T bore and allows to divert the flow in all directions including the inlet shut off, applicable to each of the three threaded ends. It is suggested for gas and water distribution, industrial and civil heating, water plants at medium pressure, hydraulics and pneumatic, non aggressive media and vacuum.
|
|
Flow Patterns:
Hayward Manual Three-Way Manufacturers of ball valves come standard with a two port "TW" ball allowing for three flow configurations within 180 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port, out the right port or shut off. Hayward Actuated Three-Way Ball Cocks come standard with a three port "NT" ball allowing for two flow configurations within 90 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port or out the right port, there is no shut off position. A "TW" ball, used with with the proper industrial electric actuator, adds what is typically called a "center off position" to the "NT" flow pattern of actuated valves. An optional "TP" ball, used with either manual or actuated valves, allows flow through all ports at the same time or flow shutoff.
True Union Design:
This makes these valves very easy to maintain by allowing for easy removal from a piping system without breaking down the piping connections. Just unscrew the three assembly nuts and lift the valve body out of the line.
Easy to Actuate:
A manual valve can be easily automated. Just remove the handle and install the optional manufacturer of actuator mounting kit. The mounting saddle is integrally molded into the valve body. For rock-solid actuator mounting, the valve incorporates a unique design whereby the mounting bracket mounts directly to the valve body. This assures proper alignment of the actuator to the valve without creating any damaging side loads to cause premature stem professional seal failure.
No Metal, No Corrosion:
Hayward all plastic three-way valves contain no metal parts. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments. |
|
Cepex offers a complete range of ball valves supplier in PVC-U and PVC-C (both manual and automatic), featuring the "Antiblock" system which prevents ball jamming. Cocks are 100% hydro tested prior to leaving the factory, and their reliability is further guaranteed by the world's premier certification institutes.
Ball valves are available in accordance with several dimensioning standards (Metric, BSP, ASTM, NPT, British Standard, JIS...) in order to meet the requirements of any market.
|
|
Automated Ball Cock - Series BV2
Full Port, Stainless Steel Construction, Rated 1000 psig (WOG), Electric and Supplier of pneumatic actuators
Automated Ball Valve - Two-Way Plastic - Series PBV
PVC or CPVC Construction, Electric and Pneumatic Industrial actuators
Automated Ball Valve - Three-Way Plastic - Series 3PBV
PVC or CPVC Construction, Electric and Pneumatic Actuators
Two-Piece Ball Valve - Series BV2M
Full Port, Stainless Steel Construction, Rated 1000 psig (WOG), Actuator Mounting Pad
Two-Piece Ball Valve - Series BV2MB
Full Port, Economical, Rated 600 psi (WOG), Blowout-Proof Stem
Three-Piece Sanitary Ball Valve - Series BV3HL
Hand Lever, SS Construction, Cavity filled
Three-Piece Sanitary Ball Valve - Series BV3HL-3A
Hand Lever, Cavity filled, Meets 3A Sanitary Standards
True Union Ball valves specifications - Series TBV
PVC Construction, Full Port, Economical
|
|
The TOTAL manufacturer of ball valve, with full bore, is an extremely robust product with perfect air bubble sealing
does not need any maintenance, is equipped with wrapping seats ensuring long life cycles. The patented outside sealing system guarantees the maximum reliability during the time.
The valve is approved according the DIN-DVGW standards: such approval was obtained for the first time in 1974 and then always renewed up to the present one. All cocks are tested at 25 bar pressure, for a period longer than 48 hours.
|
|
- ball valves manufacturer
- full sealing, excellent resistance to scaling
- smooth operation and long life
- numerous configurations from DN 4mm to 50mm
|
|
| You can count on Conbraco for top quality Apollo® bronze and steel ball valves in all sizes and shapes, and with all the connections and options you need. Whether you need cocks for hydronic systems, irrigation, instrumentation, or tough industrial process flow, one of our ball valves is sure to fit your purpose. We have Two Piece, Three Piece, Unibody, Flanged, Three-Way, Union End, Steam Prep, Specialty, Top Entry and Barstock valves for every need you can possibly imagine. Apollo® ball valves deliver world-class performance for a universe of applications. |
|
Spirax Sarco manufacturers of ball valves offer safe and effective shut-off and control for steam, liquids and gases.
Our comprehensive range offers a choice of body design, materials, connections, professional seals and options, specialty cocks suitable for specific applications and fluids, firesafe and actuated valves.
The range incorporates single, two and three piece valves in sizes up to DN150. |
|
|
