DN: 0.25 in - 4 in
Pressure: 40, 32, 25 bar
Temperature: -10 °C - 120 °C
• Full bore • Body, ball and socket hot stamped chrome plated brass OT58 • PTFE seats - O ring EPDM • Handle and nut chrome plated steel • Double o-ring stem anti leakage technology • Chrome plated stem with nut • ...
DN: 13 mm - 45 mm
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C
BRASS BALL VALVES [Technical Specification] Standard Bore Thread Connections Comply With ISO228 Material Standard brass ; CW617N; DZR Working Pressure PN25 or 2.5Mpa Seal ...
Zhejiang Italy Copper Company
DN: 0.25 in - 2 in
Flow Full ConnectionsFxF ApplicationPneumatic Stem configurationTwo O-Ring HandleLockable Handle BodyBrass ProductBall Valve Size 1/4" - 2"
Rubinetterie Utensile BONOMI RUB
DN: 0.5 in - 2 in
Pressure: max 13.0 bar
Temperature: -30 °C - 80 °C
We only produce compressed air piping system network, and this product is one of the components. The maximum working pressure at -20 ℃ to 70 ℃ (-30 ℃ to 80 ℃), 13bar. Vacuum: 0.13bar absolute pressure. Seamless Extruded Aluminum ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 120 °C
The valves in the series EKOFLUX SVO balance the flow in main circuits or single sections of heating or conditioning plants. They allow correcting irregularities in the supply of the single users (irregularities which ...
Brandoni
Pressure: 0 bar - 10 bar
Quick exaust valve series -working pressure: 0-10 BAR -body in nickel plated brass
SENGA
DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi
• Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction ...
DN: 50 mm - 600 mm
Pressure: 16 bar - 40 bar
... Gasket: EPDM, Graphite 5. Bonnet: Carbon Steel 6. Sealing Ring: EPDM 7. O Ring: EPDM 8. Stem Nut: Brass, Bronze 9. Holding Ring: Brass 10. Handwheel: Ductile Iron Design and Manufacture: ...
Valvesonly Europe
DN: 3.96, 8.74, 44.54 mm
Pressure: 259 bar - 1,379 bar
INLINE CHECK VALVES, 316 STAINLESS STEEL BODIES High Pressure. These valves are 316 S.S. ball type and soft seat (PTFE ring) in ;the 1/4 NPT, 1/2 NPT, 3/4 NPT, and 1 NPT sizes; Brass ...
DN: 25 mm
25 sphere valve. Made of chromed brass. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
DN: 10 mm - 80 mm
Pressure: 25 bar - 40 bar
Temperature: -10 °C - 120 °C
Full bore FPM shaft “o” ring PTFE ball seats Brass valve BSP threaded Nominal pressure: - 1/4” to 1”1/4 = 40 Bar - 1”1/2 to 4”= 25 Bar Working pressure: see pressure / temperature diagram Temperature ...
VALPES
DN: 15, 25, 20, 32 mm
Pressure: 25, 40 bar
Temperature: 0 °C - 150 °C
LD Company
DN: 25 mm - 32 mm
Pressure: 12 Pa
Description • The test and drain valve is a combined two position lever operated ball valve, sight glass and stop valve. • They incorporate a nominal bore drain valve ...
... Flow Characteristics, High sensitivity and easy to adjust. - Proline flow control regulators with polymer, nickel-plated brass or métal bodies, external or recessed adjustment screws, offer fine adjustment, accuracy ...
Laminar Technologies
DN: 0.25 in - 4 in
Pressure: 40, 25 bar
Temperature: -10 °C - 80 °C
Brass ball valve with stainless steel handle. Full bore. 3/4” - 1½” male/female - Full bore 1/4” - 2” female/female - Full bore 2 1/2” - 4” female/female - Reduced bore
Dansk Ventil Center A/S
Pressure: 68.9 bar
Temperature: 29 °C - 149 °C
... Forged Steel Shut-Off valve is to provide an isolation or connection point in liquid and gas applications where brass valves are not compatible or do not meet the pressure requirements. Applications Henry ...
Pressure: 200 bar
Temperature: -20 °C - 65 °C
Key advantages - High pressure brass cylinder valve for Inert, Inert mixtures and flammable gas service - Permanent gas tight seal - π marking according TPED directive - Tested according EN ISO 10297 ...
Rotarex
Pressure: 125 psi
Nickel plated brass micro needle valves offer adjustable flow in a small package. MNV-10-32MM 10-32 Male UNF x 10-32 Male UNF Max Pressure 125 psi Orifice Size Flow Coefficient: Cv: Cracking ...
Valve Check, Inc
WATER METER BRASS BALL VALVES Water-Meter brass ball valves : Brass body, ball an stem PTFE seats Double O-ring ISO R7 threading Full bore Anti ...
TUNING Fluid Solutions SARL
Pressure: 35 bar
It is used to control the flow for regulator or pipe system
Xuzhou Hongye Apparatus & Instrument Co.,LTD
DN: 8 mm - 47 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 120 °C
DESCRIPTION • 2-way ball valve BSP female threated • Body and Ball Brass MS58 chromium plated • Seats PTFE • O-rings Viton® • Lever aluminium epoxy coated • Working pressure maximum 40 Barg up to ...
Vapo Techniek B.V.
DN: 0.25 in - 2 in
Pressure: 10 bar - 28 bar
Product Information Material: Bronze Seat: RTFE Thread: female NPT x female NPT
... LLP is one of the most renowned Brass Ball Valves Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. Further, ...
Paani Precision Products LLP
DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C
Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size)
F.lli TOGNELLA
Please specify:
Help us improve:
remaining