- Machine-tools >
- Machine Tool Accessory >
- Chuck
Chucks
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Can clamp OD or ID shapes of the workpiece by changing machinable jaw! Perfect for irregular-shaped workpiece and low-profile workpiece! This unique clamp eliminates the need to make a complicated fixture and provides simple workholding. CP125 ...
Imao Corporation
OD clamp with machinable jaw. Can be used on VMC, HMC and lathe. 4 jaw sections tilt toward the center to clamp the circumference of workpiece. This unique clamp eliminates the need for complicated fixture and provides simple workholding. Interchangeable ...
Imao Corporation
OD Holding Clamps with a machinable jaw are perfect for irregular-shaped workpieces. Simple workholding eliminates the need for custom fixtures. Ideal for clamping small part. When the locking screw is tightened, both jaws tilt ...
Imao Corporation
Clamping range: 4 nm
The MacroCombi chucks accept two completely different types of electrode holder. Both Macro with its immovable stability and precision, and MacroJunior with its highly economical holders…
GF Machining Solutions
Among users world wide, the Macro system is a byword for precision. And with good reason, since very single Macro product is thoroughly checked before it is dispatched…
GF Machining Solutions
MacroNano system is best described in two words as precise and quick! The MacroNano clamping system links the production chain through an ultra-precision coupling both for workpiece and electrode holding…
GF Machining Solutions
High Pressure Chuck The high vibration damping in hydro expansion technology ensures optimum workpiece surfaces and a longer tool life. Its simple operation without additional devices also impresses. These robust and ...
... ER Précision Collet Chuck The Centro-P ER précision collet chuck is among the very best collet chucks available. Unique, patented design features enable much greater accuracy to be ...
Static Tool Holders Reliability, radial run-out accuracy, repeatability and vibration damping - we hâve the perfect clamping solution for every rotating tool, whether for traditional standard applications or high-speed machining. PSC ...
... collets, WFB quick-change system, ...) HSK tool holders (HSK-T/HSK-A interface, shrink-fit mounting, hydraulic expansion chuck, ...) Compact shank tool holders (WFB interface, external and internal cooling, multiple ...
Clamping range: 0.25 mm - 25 mm
Rotational speed: 40,000 rpm
... Speed Collet Chucks The world’s highest precision & multi-purpose collet chuck system is well accepted and recognized by the market for its high-speed application and its guaranteed 1 micron runout. The ...
BIG KAISER
Clamping range: 0.08 mm - 0.79 mm
Rotational speed: 40,000 rpm
... total precision of our collet, nut and body when used together shatter the common standard of ER collet chucks. The MEGA Series ER Grip collet chucks are precision ground and balanced for high speed ...
BIG KAISER
Clamping range: 3 mm - 12 mm
Rotational speed: 40,000 rpm
... End Mill Collet Chucks MEGA E Chucks are designed exclusively for end milling with high concentricity and rigidity. Gripping force is an important element for end milling with a collet chuck. ...
BIG KAISER
Mandrel collets Material: Mandrel mild steel. Taper-head screw low-carbon steel Version: Mandrel black oxidised. Taper-head screw case-hardened. Note: The mandrel collet is ideal for finish machining turned parts. The diameter D can ...
norelem - Éléments standard mécaniques
Material: Chuck high-carbon steel, nickel-plated. Collet high-strength aluminium, blue anodised. Note:The pneumatic collet system consists of a chuck and a machinable collet. The chuck ...
norelem - Éléments standard mécaniques
... number is marked on the matching slot of the chuck body. Chuck D=50 with operating tool and Ø2 mm pins, 3x12 mm and 3x18 mm long. Chuck D=64 with operating tool and Ø2 mm pins, 3x12 ...
norelem - Éléments standard mécaniques
Clamping range: 3 mm - 20 mm
The compact collet chuck with Quick•Point® zero-point interface is designed for milling round components with clamping diameters of 3 - 20 mm and uses commercially available ER-32 collets. Its slim design offers excellent ...
Clamping range: 6 mm - 34 mm
The compact collet chuck with Quick-Point® zero-point interface is designed for milling round components with clamping diameters of 6 - 34 mm and uses commercially available ER-50 collets. Its slim design offers excellent ...
Clamping range: 10 mm - 160 mm
The 6-jaw chuck with quick jaw exchange system is equally suitable for machining blank parts with gripping jaws and for the clamping of deformation-sensitive components with soft top jaws. In both cases, the manually ...
The bush for tapping comes with adjustable clutch. The tool holder is used for tapping model from M2- M30 with and without friction, compasses, magnet positioning.
Clamping range: 0.38 mm - 24 mm
Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc. with DIN ISO 10887 (toothing in acc. with DIN 6349). For clockwise and counterclockwise rotation. PRIMA-S / -M: Medium-heavy design with ...
RÖHM GmbH
• Self-tightening flat jaw drill chuck. • Industrial design with maximum precision. • Strong retaining ring • All components made from steel • Hardened and superfinished • Only suitable for clockwise rotation Especially ...
RÖHM GmbH
Clamping range: 0 mm - 16 mm
Self-tightening flat jaw drill chuck. • Strong retaining ring • All components made from steel • Hardened and superfinished • Only suitable for clockwise rotation Suitable for stationary drills and hand-operated ...
RÖHM GmbH
4-jaws-clamping chuck - Raring IP 65 Rating IP 65 with pressurization - Protection against copper and bronze - Permanent lubrication
Clamping range: 18 mm - 100 mm
Rotational speed: 0 rpm - 7,000 rpm
Maximum machining capacity MAXXOS T211 is a mandrel with a hexagonal pyramid shape instead of a round taper – perfect for demanding and reliable process manufacturing. Through the hexagonal clamping pyramid, maximum transmission forces ...
HAINBUCH GMBH SPANNENDE TECHNIK
Clamping range: 8 mm - 100 mm
Rotational speed: 0 rpm - 7,000 rpm
... high clamping force Often complete machining fails for lack of an effective I.D. clamping device. In many cases the jaw chuck is a makeshift solution. However, even conventional mandrels with slotted clamping sleeves ...
HAINBUCH GMBH SPANNENDE TECHNIK
Clamping range: 20 mm - 200 mm
Rotational speed: 0 rpm - 7,000 rpm
... high clamping force Often complete machining fails for lack of an effective I.D. clamping device. In many cases the jaw chuck is a makeshift solution. However, even conventional mandrels with slotted clamping sleeves ...
HAINBUCH GMBH SPANNENDE TECHNIK
The cutting quality can get affected due to the applicability and precision of the glass cutter. It is mainly used for saisfying the needs of glass cutting machines. Holders with different applicability are discovered from time to time, ...
The Feature of HDXL Holder The holder is made of zinc-aluminum alloy. Compared with the traditional plastic holder, the zinc-aluminum alloy holder has the characteristics of high hardness, wear resistance, good cutting stability and ...
MKE 1-31 To be used with flexible shafts Order number : 020001400 Revolutions per minute [min¯¹] : max. 9.000 Weight [g] : 650 Connection : claw 31
Tool holder for handpiece MKE 1-31 Order number :020003400 Revolutions per minute [min¯¹] : max. 9.000 Weight [g] : 650 Connection : MK 1
Tool holder for handpiece MKE 1-31 Technical Data Order number : 020003600 Revolutions per minute [min¯¹] : max. 9.000 Weight [g] : 200 Connection : MK 1
Clamping range: 25 mm - 128 mm
The multi-blade mandrels are ideally suited for long workpieces and are mainly used for turning operations. They ensure a maximum of 0.01mm concentricity in the entire clamping range. The lamella clamping mandrels are supplied as power- ...
SwissChuck AG
Clamping range: 1.5 mm - 200 mm
Rotational speed: 3,500 rpm - 6,300 rpm
The collet chucks are designed for demanding clamping geometries and varying workpiece diameters. The high-precision lamella clamping technology makes it possible to cover a clamping range of several millimeters with ...
SwissChuck AG
... axial force for the rotating power chucks mounted at the spindle head. This axial force is transmitted via a connecting link, designed as a tube or a drawbar, going through the spindle bore to the respective power chuck ...
SwissChuck AG
Clamping range: 0.3 mm - 2 mm
DC SWISS SA also keeps the appropriate extra tools in its range. What is the point of cutting a thread to a high degree of accuracy if you can't check it afterwards? That's why DC SWISS SA offers a complete range of thread gauges with ...
DC SWISS SA
Clamping range: 0.5 mm - 4 mm
DC SWISS SA also keeps the appropriate extra tools in its range. What is the point of cutting a thread to a high degree of accuracy if you can't check it afterwards? That's why DC SWISS SA offers a complete range of thread gauges with ...
DC SWISS SA
Clamping range: 3 mm - 12 mm
DC SWISS SA also keeps the appropriate extra tools in its range. What is the point of cutting a thread to a high degree of accuracy if you can't check it afterwards? That's why DC SWISS SA offers a complete range of thread gauges with ...
DC SWISS SA
Clamping range: 2 mm - 50 mm
Static tools for VDI & BMT turrets! The company proposes a wide range of suitable Driven Tools for equipping the lathes turrets by world leader manufacturers, such as BIGLIA, BMT, DMG MORI, GOODWAY, HAAS, MAZAK, MIYANO, NAKAMURA, OKUMA, ...
Cover your basic needs at an impressive price/performance level! With the ECOGRIP range ETP sets a new standard of hydraulic toolholders. ETP ECOGRIP has a very compact and robust design. Tool changes are made quickly, easily and with ...
ETP
Your ideal replacement for any ER collet holder! The short design of 75 mm makes ETP HYDRO-GRIP COMPACT your ideal replacement for any ER collet holder. Allowing more and more users to fully benefit from all the positives of hydraulic ...
ETP
A chuck for your router bits and a arbor for your profile tools - at the same time! The new COMBO let you enjoy all the benefits using a hydraulic chuck for your router bits and a hydraulic arbor for ...
ETP
Clamping range: 3 mm - 25.4 mm
Rotational speed: 0 rpm - 30,000 rpm
Since the early days, originally to accommodate automatic work holding for the CNC Rotary Tables used on our production lines (with our ‘New Century’ Arbor), Nikken have always strived to provide solutions to counter the effects of vibration ...
NIKKEN KOSAKUSHO
Rotational speed: 0 rpm - 40,000 rpm
... for milling processes. As such some of features and design advantages of two existing products, namely the Slim Chuck and the Mini-Mini chuck, have been incorporated and combined into what has become ...
NIKKEN KOSAKUSHO
Rotational speed: 0 rpm - 40,000 rpm
The NIKKEN Slim Chuck is our standard and precise collet chuck solution. The construction consists of three components – the main body/shank with fine, molybdenum coated, external ground thread and internal ...
NIKKEN KOSAKUSHO
Clamping range: 10 mm
for BSM 20 for sharpening countersinks up to 20mm Standard equipment: Countersink grinding fixture for the BSM 20 completely with clamping device Ø 10mm adapters for BSM 20
KAINDL REILING
Clamping range: 10 mm
COUNTERSINK SHARPENING DEVICE SVR 31 is designed and manufactured with a clamping device, complete with a diametric measurement of Ø 10 mm. It is built with a countersink grinding fixture that is commonly suited for the BSG 60. Its integrated ...
KAINDL REILING
Clamping range: 10 mm
Kaindl's SVZR Series of sharpening devices features countersink and drill sharpening systems for the BSG 60 configurations. Models of the series are equipped with clamping units, complete with diametric measurements that approximate at ...
KAINDL REILING
WZ-toolholders- DIN 1835-B for Gigant modular sprinter coating: without
EMUGE-FRANKEN
WZ-toolholders-DIN69871 AD/B; SK for Gigant modular sprinter
EMUGE-FRANKEN
WZ-toolholders-DIN69893-1; HSK for Gigant modular sprinter
EMUGE-FRANKEN
SIAM RINGSPANN
Clamping range: 18 mm - 140 mm
SIAM RINGSPANN
Clamping range: 12 mm - 130 mm
SIAM RINGSPANN
Rotational speed: 1,200 rad.min-1 - 10,000 rad.min-1
A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...
Rotational speed: 5,000, 10,000, 6,000 rpm
A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...
Compact tool holder which length under the gage line is 23.5mm (including bush flange thickness 1.5mm). Optimal when available space is limited. A compact tool holder ideal for use when available space for tooling is limited inside the ...
HSK-E For high speed cutting (HSC) For automatic tool change Without any drive keys for absolute symmetry
REGO-FIX
T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 with 10 mm diameter Q+ Balancing, ...
REGO-FIX
TC (SK) Toolholders Specifications T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID ...
REGO-FIX
AKKO CUTTING TOOLS
AKKO CUTTING TOOLS
AKKO CUTTING TOOLS
Your suggestions for improvement:
Tool holders serve as supports for cutting tools used on machine tools. They are used for rotary as well as non-rotary tooling, such as on lathes. Size and mounting configuration varies to suit different machine tools and applications.
ApplicationsThese devices are used on turning centers, machining centers, multi-task machining and indexing.
TechnologiesRotary tool holders may have side-lock, collet chuck, hollow shank, Morse taper or shrink-fit holders. Lathe tool holders are mostly static; the cutting tool remains stationary as the workpiece turns. Rotary lathe holders use an internal drive system to rotate the cutting tool for multiple function lathes.
How to chooseChoice will depend on the machine tool's mounting system, the type of operation and the size of the work piece.
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining