|
|
CMB
Screw coupling bronze connector for signal, control or power.
Intervehicle, roof or underframe location.
For harsh environment and several daily couplings.
6 shell sizes / 31 arrangements from 1 to 61 poles.
Removable hard insert / silver or gold plated crimp contacts.
Features & Benefits
Nominal current : from 15 A to 500 A
Service voltage : from 110 V AC to 1500 V DC
Test voltage : 2550 V, 3250 V or 5750 V
Protection index : IP66 mated with suitable backshell according to EN 60 529
Salt spray resistance : > 500 hours
Temperature range : -40 degC / +100 degC
Endurance : > 500 coupling cycles
NF F 61-030 standard compliance
For very harsh environment
Fire behaviour : requirement 2 following NF F 16-101 & NF F16-102
RoHS compliance
Standards and Quality Approvals
ALSTOM approval
Technology/ Coupling System
Environmentally Sealed
Screw thread
|
|
Its excellent position in terms of market prices and our short lead-times (3 weeks for the most common versions) make it a reference in the field of cylindrical bayonet metal interconnection.
Technical advantages :
- many versions available: watertight (IP66/67), hermetic, shielded, etc.
- resistant to many fluids
- resistant to shocks and vibrations
- operational from –55° to +125°C
Proven world standard, the 451 series comprises a wide range of products :
- 9 shell sizes available
- 35 insert arrangements and up to 61 contacts
- Types: solder, crimp or PCB contact
- Shell finishes: electroless nickel, bright or olive drab cadmium plating, black anodised
- Thermocouple contacts as standard
|
|
Mil-DTL-38999 connectors are designed and approved to meet the most stringent requirements of the Military and Aerospace industry. Amphenol’s Mil-DTL-38999 and derived products range covers light weight, low profile, ruggedised, EMI protection and scoop proof connectors .
The large contacts arrangements range provide from 1 to 128 rear release crimp contacts. Contacts sizes available : 22, 20, 16, 12, 8.
Each Mil-DTL-38999 series integrate 5 safe coding possibilities in a large range of shell form, material and finish. Different closing systems are available to fit the best each customer need.
Amphenol provides the largest range of Mil-DTL-38999 connectors worldwide (more than 60 contacts arrangements and lots of versions which are not covered by the US military standards).
Applications : military, avionic, aerospace, industry, …
|
|
For sixty years, the HCC Industries family of companies has been providing the technological know-how to meet the unique requirements of the defense and aerospace industries, as well as those customers in other industries using circular connectors in their applications.
|
|
Cylinder Connectors and seal caps for all types of connections of cylinders. Stainless steel or brass. CGA/DISS, CGA, DIN, BS, AFNOR, JIS, RU/LU, UNI
Brand :
Selfa
Working pressure :
0.00 bar
Material :
Stainless steel
Gas :
Uhp gases
|
|
|
|
|
|
The RNJ Series rack and panel connectors are used to connect electrical and optical devices between a moving unit (rack) and a fixed unit (panel), without any coupling / uncoupling system.
- EMI shielding
- Shells are grounded before contact mating
- Lightweight space saving design
- Durability: 500 cycles
- Moisture resistance: in addition to interfacial seal, main joint souffler and rear gasket on the plug are set up for moisture sealing between connector halves
- Corrosion resistance:
- Olive drab cadmium over nickel plating on aluminium shell (withstands 500 hours of salt spray exposure) or electroless nickel
- Free cadmium version also available.
- 8 shell sizes from 11 to 25
- Contact protection:
- 100% scoop-proof. The design prevents bent pins and a short circuit occuring during mating.
- Between 1 and 128 contacts in accordance with Mil-C-39029 standard
- Crimp contacts sizes 22D, 20, 16, 12, 8, 4, 00.
- PCB contacts sizes 22D & 20 (size 16, 12, 8, please consult Amphenol)
• Wire-wrap contacts sizes 22D & 20
• Optical termini (POM series) in accordance with Mil-T-29504 standard
• For environmental applications:
supplied without rear accessories. Design provides serrations on rear threads of shells.
Compatible
|
|
Straight Connector, Female Thread
Straight Connector, Male Thread
|
|
The Han® R 23 series comprises circular connectors with high contact densities.
The inserts with 6, 9, 12, 17 or 19 contacts plus a PE contact are available with crimp, solder or screw terminals. The connectors are rated for 7 ampere or 15 ampere at 50 volt.
|
|
M1 and M3 Series universal industrial connectors are designed for safety and reliability in harsh ambient conditions. Vibration, dust, aggressive liquids or vapours are often the cause of failures and serious safety problems.
Sealed to IP67, our M1 and M3 Series circular connectors are dustproof and water pressure-tight. They are also resistant to the effects of most acids and alkalines as well as the extremes of temperature.
Sealed to IP67 when not mated: By assembling additional O-rings between connector shell and contact insert as well as between contacts and contact insert, the M1 Series connectors are sealed to IP67 (immersion protected).
Thus protected, the connectors are water tight even when not mated, and ingress of water into electric equipment through the connector is not possible.
|
|
M1 and M3 Series universal industrial connectors are designed for safety and reliability in harsh ambient conditions. Vibration, dust, aggressive liquids or vapours are often the cause of failures and serious safety problems. Sealed to IP67, our M1 and M3 Series circular connectors are dustproof, pressure proof and water protected when mated. They are
also resistant to the effects of most acids and alkalines as well as the extremes of temperature.
You can use our M1 and M3 Series connectors for various applications, especially where high reliability under harsh environmental conditions is important. Typical applications are: mining, ship-building, power plant construction, mechanical and traffic engineering, environmental technology or food processing. We hold numerous official approvals.
|
|
FEATURES
■ Rugged aluminium body to ensure long service life in the
harshest environment.
■ Optimum space and weight saving whilst achieving maximum
strength.
■ Option of either size 22 or 26 gold plated crimp contact or PCB
contact available.
■ Environmental sealing from interfacial seal and rear grommet.
■ Positive locking mechanism with locked colour indicators.
■ 6 colours coded keyway orientations.
■ Boot termination feature.
■ Conductive black zinc plating.
|
|
|
|
|
|
ODU ROB:
- Connector for industrial robot systems and units
- Simple installation because the contacts lock in place
- IP 67 when inserted
- Flammability class UL 94-V0
- Cable housing can be rotated in any direction
- Pilot contacts are possible
- Very good electric characteristics (operating voltage up to 800VAC)
- Cable housing can be rotated in any direction- straight or
right-angled cable outlets
- Simple packaging of the cable housing
- Cost savings with system solution (connector & cable)
ODU DOCK:
- Connectors for robots, docking systems and tool changing systems
- 4 sizes
- Connector diameters from 28 to 75 mm
- Interchangeable contacts
- Contacts fastened with metal clip (barbed hook)
- ODU springwire contacts for high contact stability
- Version with quick-change head available for extremely
high number of mating cycles
Heavy Duty Connectors:
- Up to 1,500 A
- Up to 252 contact positions
- More than 100 different pole images
- Threaded and bayonet locking
- ODU springwire contacts for high contact stability
- Suitable for the most hostile environmental conditions
- Very long life span
- High packing density
- Mechanically robust
|
|
|
|
|
|
Connectors for signal transmission – uninterrupted connections even under adverse ambient conditions: DN Metal and DN Plastics connectors from Schaltbau.
With the DN Series the proven spring-loaded contact technology from military communication will set new standards for signal transmission when it comes to industrial applications. Our water tight connectors ensure uninterrupted connection in harsh environments. The DN Series connectors feature bayonet interlock. The spring-loaded contacts with self-cleaning faces, patented by Schaltbau, guarantee a long design life and high resistance to shock and vibration. The constant low contact resistance provides for high contact reliability even with low voltages and currents within a wide temperature range.
The modular design of the DN Metal Series allows for additional shielding of the connector against electromagnetic influences.
Schaltbau DN Series connectors: The cost-effective and technologically attractive alternative to commercially available push-pull connectors!
|
|
- Dynamic IP68/IP69 - Waterproof connectors in mated an unmated conditions
- Design based on MIL-DTL-26482 connectors or equivalents such as BS 9522 FOO17, NFC93422, HE301B, VG 95328.
- Protection of electronics inside the equipments/boxes in case of maintenance, unmated conditions or cable damage.
- Salt spray resistance:500h
- Temperature range: -40°C +105°C
- Mechanical performance: 250 matings/unmatings
- RoHS compliant
|
|
|
|
|
|
SAL Connectors
The dimensions and construction of the CONEC SAL connector series comply with IEC 61076-2-101.
They are used in many applications in the field of automation technology for signal transmission, power transmission or for data communication in field bus technology.
...with overmoulded cables
reduce installation costs and save time drastically, through the use of connectors with integral wires.
The choice of material and the construction of the connector enable it to be used in a dirty and damp industrial environment.
...for special requirements
are often made of special materials concerning their chemical resistance and temperature stability. CONEC has developed special products for these areas. Special materials are available for a temperature range of 125°C for 6000 h.
Field attachable connectors ...
can be assembled freely and are often required for individual cable lengths, e.g. for the construction of special purpose machines.CONEC offers 4 and 5-pin models here in an axial and angled construction for connectors and adapters. In the angled construction the cable outlet is adjustable in a 90° pitch to the pin layout.
Chassis connectors
Installation flanges are used to produce an M12x1 connection on the device. A newly developed modular system makes it possible to produce a wide variety of combinations among one another.
Fieldbus technology ...
has increased dramatically in the industrial sector over the last few years. CONEC offers connectors for Profibus DP and Industrial Ethernet. Integral M12x1 connectors with corresponding pin layout coding (in acc. to IEC 61076-2-101 standards) are available for both bus systems.
|
|
EPIC® LS1 A1 6 contacts
The power connectors LS1 with the contact configurations 5+PE and 3+PE+4 are designed to be used in servo motors and servo harnessings
Application range
Plant engineering and construction
Servo drives and Servo harnessings
Technical Data
Rated voltage in V
630 V
Rated impulse Voltage
6 kV
Rated current in A
25 A
Contact resistance
< 4 mOhm
Contacts
Brass, gold plated
Number of contacts
5 + PE
Termination methods
Crimp termination: 0.5 - 2.5 mm²
Material
Housing: zinc die-casting nickel-plated Insert: PA, Sealing: FPM
Degree of protection
IP68 (10h / 1m)
Cycle of mechanical operation
500
Range of temperature
-25 °C - +125 °C
VDE tested
VDE-REG.-No. 25
Pollution degree
3
Product features
Panel mount base, straight entry
For male contacts
Housing with assembled insulation body
|
|
|
Wide range of parts, up to 14 poles, with and without 360° shielding. Easy mounting, compatible mating acc. to IEC 60130-9. Protection degrees IP 40 and IP 68, special types for UMTS 3G antenna control systems acc. to AISG in IP 67. For signal and load currents up to 5 A.
|
|
|
Miniature connectors (also referred to as "Mini DIN"), including S-VHS, and DIN connectors according to DIN 455321, mating compatible to IEC 60130-9. 3-8 poles. For signal and load currents up to 4 A.
|
|
|
The SS Series and SSC Series short plugs feature an innovative design and lightweight, miniature construction for applications requiring space saving and high pin density configurations. The 102 series, for example, is available with up to nine pins in a 9mm diameter.
|
|
For sixty years, the HCC Industries family of companies has been providing the technological know-how to meet the unique requirements of the defense and aerospace industries, as well as those customers in other industries using circular connectors in their applications.
NEW from Ametek SCP, a range of Rugged Gigabit Ethernet Connectors. Designed for use in very harsh environments and available in D38999 and MIL-C-24231 shell configurations. Certified by ETL to TIA/EIA 568 CAT 5E and CAT 6. PATENT PENDING.
|
|
|
|
|
|
Current Rating: 3 amps max
Dielectric Withstanding Voltage:
600 VAC RMS
Insulation Resistance:
5000 Meg ohms min @ 500 VDC
Contact Resistance:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force:
Forces not to exceed 6 oz/contact
Temperature Cycling:
-55 ° C to +125 ° C, 5 cycles
Humidity (Mated):
IAW MIL-STD-1344, Method 1002.2, Type II, Omit Steps 7A & 7B
Vibration:
IAW-MIL-STD-1344, Method 205.1, Test Condition IV, 20 g's
Mechanical Shock:
IAW-MIL-STD-1344, Method 2004.1, Test Condition E, 50 g's
Durability:
500 cycles
Contact Resistance after Durability:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability:
Forces not to exceed 6 oz/contact
Salt Spray:
48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:
28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray:
28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray:
Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray:
Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing:
NASA SP-R-0022
Solder Heat & Contact Retention:
360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Solder ability:
MIL-STD-202, Method 208
|
|
|
The M12 x 1 round connector family from ESCHA provides a wide range of robust and sophisticated components. A choice of pre-assembled and premoulded versions, flange connectors as well as field-wireable connectors, ranging from 3- to 12-pole versions are available for your application.
|
|
|
Hypertac circular connector range covers industrial market (through its M23, M40, M58 Series Metallic, Plastic and Inox), medical market (Push Pull D Series and Hypergrip with IP67 and shielded capability in cable clamp or overmolded version), mil-aero market (Future Combat Soldier Connectors, High Speed with filter capabilities and HBN connectors) and railway market (Balise connectors, M23 Series, Car-to-car Couplers). All applications can be equipped with custom solutions made on customer's requirement.
|
|
INDUSTRIAL 5015 CONNECTORS AND CABLE ASSEMBLIES
Cooper Interconnect is pleased to announce the release of our new series of Industrial 5015 connectors and cable assemblies. These heavy duty circular connectors conform to the MIL-DTL-5015 specification with similar reliability and performance.
Originally designed for military equipment, the industrial 5015 series is widely used in various industries due to its low cost and strong performance. The Industrial 5015 connector is used in products that require high levels of reliability such as medical equipment, electric cars, industrial building machinery, motors, sensors, robotics, heavy equipment, solar voltaics, etc.
Connector Styles
There are five basic connector styles. C3100, C3101, C3102, C3106 and C3108. Each style relates directly to its military counterpart, MS3100, MS3101, MS3102, MS3106 and MS3108. The Industrial 5015 products are constructed to the same demanding standards and physical dimensions as the military version.
|
|
|
|
|
|
Ex Connectors
Simple To Use Quick To Terminate
Temporary but safe disconnection of power is critical in many industries. To meet this requirement Hawke International has introduced a new series of EExd Connectors that are ATEX approved, easy to use and exceptionally robust. They permit the safe and rapid service, repair and replacement of key plant, or provide quick connection to temporary equipment. Their application is beneficial in capital-intensive processes where minimum downtime is essential.
The new connectors are ideal for Zone 1 and Zone 2 explosive environments commonly found in oil and gas exploration, production and process plants. However, their features also offer benefits in Zone 21 and Zone 22 explosive dust environments, or in harsh and hostile non-explosive applications.
In compliance with the ATEX Directive (94/9/EC), the new design retains many of the best features of Hawke's previous connector range, but in addition adds innovations based on user feedback. The heavy duty, maintenance free stainless steel body construction is retained, along with the acclaimed Acme mating thread; enabling quick connection whilst preventing thread binding or galling.
|
|
|
|
|
|
Features and Benefits
- Larger coupling ring for ease of mounting
- Mating assurance indicator
- Epoxy sealed receptacle shells for positive reliability
- NEMA 6P rating
- Compatible with European DIN standard Prox switches
- Superior strain relief
Reference Information
- UL File No.: E81982
Mechanical
- Cable: ODVA approved cable
- Receptacle Body: Nickel plated for improved corrosion resistance
- Insert Material: UL recognized plastic�exceptional chemical resistance and electrical support
- Coupling Nut: Aluminum with Nickel plating
- Contacts: Gold plated Copper Alloy
- Molded Connector: PVC
- Plug Seal: Nitrile (BUNA-N) O-ring
Physical
- Corrosion: Nickel finish provides 300-hour salt spray protection per MIL-STD 202 method 101
- Vibration: Complies with MIL-STD 202F, test method 204, test condition B
- Rainproof: Meets rain proof requirements of UL rain test as specified in UL STD 514. Conforms to NEMA 6P enclosure requirements and meets watertight performance rating of IP67.
- Temperature: -40 to +90�C
|
|
|
The pre-assembled and pre-moulded M23 x 1 round connectors are ideally adapted to our M12 x 1 actuator/sensor boxes for which they are used as connection cable. There are 12- and 19-pole versions with various pin configurations as well as field-wireable 12-, 16-, and 19-pole connector types.
|
|
|
With ESCHA's dual junctions the distribution or collection of signals is no longer a problem. You can choose from a wide range of dual junctions of the M12 x 1 and M8 x 1/Ø8 mm series and connector and/or cable versions.
|
|
EMI/RFI Filtered Connectors
Various - EMI/RFI Filtered ConnectorsFilter Connectors. The concern over interference in sophisticated electronic equipment, now operating on lower power levels, has seen an increased use of in-line filter devices to suppress either the effect of externally generated interference, or to reduce emissions from the equipment itself.
AB Connectors have engineered solutions which can be adapted to may of the market standard connector ranges, making retro-fitting to existing equipment a quick and effective solution, to EMI/RFI problems.
As an alternative AB Connectors produce Interface Filter Adaptors which simply plug in between existing connectors, thereby making modification in the field a simple and cost effective option.
Connector Types
MIL-C-5015
MIL-C-38999
MIL-C-26482 Series 1
Further details on the Various range available on request from the factory.
|
|
ABXS. With its ingenious ball-bearing coupling mechanism, the ABXS Miniature Push-Pull Connector is easy to use and provides a reliable interconnect for signal and power in audio, control and instrumentation applications. The range has two shell sizes housing 3 to 9 gold plated contacts in a range of aesthetically pleasing long life shell finishes.
The ball-bearing mechanism provides easy connection by pushing on the back accessory and easy disconnection by pulling on the coupling nut. The connector cannot be disconnected by pulling on the cable or backshell using normal force.
The shells are made from copper alloy with a choice of finishes in bright nickel or black epoxy.
|
|
|
|
