|
|
|
The Accumeasure 9000 is Ultra-high precision capacitive gaging system offering nanonmeter accuracy. It is ideal for a wide variety of displacement, position, vibration and dimensional gaging applications.
|
|
|
|
|
|
|
The program of ODS Black-line laser sensors are a series of sensors based on optical triangulation, with different measuring ranges and resolutions, used in various environments, from the very hot and harsh applications in the heavy industry to the delicate applications in laboratories. Potential applications are innumerable. From food and medical industry over wood-, rubber- and offshore industry to milling marble, stone and cast iron – everywhere a non-contact precision measurement is valued. Seven different measuring ranges are available, the smallest covers 16 to 25 mm and the largest 400 to 1100 mm. Furthermore all ODS Black-line sensors are available with measuring frequencies of 2 kHz and 5 kHz. Higher measuring frequencies give shorter distance between the individual measuring points on a moving target, and increase the possibility for averaging over a sufficient number of measuring points to obtain a required high resolution. Apart from the standard models, all ODS Black-line sensors are supplied with a Select functionality, allowing the sensor to be programmed to calculate a user defined running average. Software with every sensor provides easy setting of the Select parameters. For more detailed information please study the PDF/datasheet on our website www.sensor.dk
|
|
Type: ISAG
Stroke: 2 .. 50 mm
Transducer: external
Operation: Swivel heads
Connection: Cable
Linearitytol.: +-0,5% (+-0,25%)
Operation temp.: -35° .. +120°C
Type: ISAT
Stroke: 2 .. 50 mm
Transducer: external
Operation: Spring return
Connection: cable/plug
Linearitytol.: +-0,5% (+-0,25%)
Operation temp.: -35° .. +120°C
Type: ISAL
Stroke: 2 .. 200 mm
Transducer: external
Operation: Unguided armature
Connection: cable
Linearitytol.: +-0,5% (+-0,25%)
Operation temp.: -35° .. +120°C
|
|
|
The Series 925 Linear Cable Reel Sensor can be used in any linear application up to 1200 inches. The system consists of a heavy-duty spring motor assembly attached to a precision-machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected to it. The shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions required by the chosen sensor. There are three basic models. The Series 925 Linear Cable Reel Sensor can be used with our Series 1746 Resolver Input Card and a Series 2120 PLC Transducer Module.
|
|
|
These sensors have size, weight, and installation advantages over traditional rod-and-cylinder transducers such as LVDTs and linear potentiometers. They offer easier mounting than rotary synchro and RVDT sensors. Tested to DO-160D/ED-14D successfully.
|
|
The Celesco SP1 and SP2 String Pots and SE2 String Encoder, are compact, economical and durable.
These sensors are designed for tight spaces, high-cycle applications and generously allows cable misalignment. With 4 different measurement ranges and handy mounting brackets, the S Series is a perfect solution for many applications, from light industrial to OEM.
Output Signal Options: Voltage Divider (potentiometer), Incremental Encoder
Measurement Range Options: 0-4.75 in., 0-12.5 in., 0-25 in., and 0-50 in.
|
|
|
The FOD is a fiber optic linear position and displacement sensor that provides high accuracy, absolute measurements of position and displacement. The FOD is well suited for difficult to reach locations and hazardous environments such as those containing explosive materials
|
|
- World's Fast Sampling Speed of 50 kHz
- Industry Best Accuracy of ±0.03% (LK-G10/15)
- Class Best Resolution of 0.0004 Mil (0.01 µm)
- Multifunctional Controller
- Simple, Menu Driven Software
|
|
|
|
|
|
The ODS Red-line program is a series of sensors based on optical triangulation, with different measuring ranges and resolutions. All made to be used environments, ranging from the very hot and harsh applications in the heavy industry to delicate applications in the laboratory. Some models are particularly appropriate for cold or hot rolling of steel and metals. The ODS Red-line sensors are used either for larger measuring ranges or for applications where a long stand-of distance is needed along with high resolution.
Nine different measuring ranges are available, the smallest cover 450 to 550 mm and the largest 2000 to 4000 mm. ODS Red-line sensors are available with measuring frequencies of 1 kHz, 2 kHz and 5 kHz. Higher measuring frequencies deliver shorter distance between the individual measuring points on a moving target, and also increase the possibility of averaging sufficiently to obtain the required high resolution.
All ODS Red-line sensors are supplied with a Select functionality, allowing the sensor to be programmed to calculate a user defined running average. Free software provides easy setting of the Select parameters.
For further information please study the PDF/datasheet on our website www.sensor.dk
|
|
The MX1C is a self contained laser displacement sensor. Featuring a small size and high resolution of 50 microns (0.002"), the MX1C is perfect for small mounting areas with delicate applications. The MX1C is easy to align with its visible Red laser.The MX1C offers a 4-20mA analog output, and, a discrete transistor output for displacement determination.
The MX1C utilizes triangulation to determine object displacement. The sensor head projects a laser beam to the object. The diffuse-reflected light from the object's surface is received as a spot image. This spot image moves from position A to B on the PSD (position sensitive device). The optical triangle is used to compute the exact distance between the sensor and the object.
|
|
The MX1C is a self contained laser displacement sensor. Featuring a small size and high resolution of 50 microns (0.002"), the MX1C is perfect for small mounting areas with delicate applications. The MX1C is easy to align with its visible Red laser.The MX1C offers a 4-20mA analog output, and, a discrete transistor output for displacement determination.
The MX1C utilizes triangulation to determine object displacement. The sensor head projects a laser beam to the object. The diffuse-reflected light from the object's surface is received as a spot image. This spot image moves from position A to B on the PSD (position sensitive device). The optical triangle is used to compute the exact distance between the sensor and the object.
|
|
The MX1A and MX1B laser displacement sensors feature high precision laser beams which can detect infinitesimal displacements of up to 0.0004" (10 microns). These laser sensors provide extremely accurate results with a linear relationship between analog output and detected distance. For example, they can detect objects with very low surface reflection characteristics, such as black rubber.
The sensor head projects a laser beam to the object. The diffuse-reflected light from the object's surface is received as a spot image. This spot image moves from position A to B on the PSD (position sensitive device). The optical triangle is used to compute the exact distance between the sensor and the object.
The MX1A and MX1B laser sensors can be combined to determine the thickness of an object. Uniform production results can be obtained when layering materials by providing a precise calculation of the finished thickness. The MX1B also provides a digital readout for easy setup and monitoring.
|
|
The non-contact Gemco LPS Linear Position Sensor
uses fi eld proven and reliable magnetostrictive
technology to deliver accurate, absolute and
continuous machine positioning.
|
|
|
|
|
|
Description for pictured GEL 176 Absolute Linear Scale:
* Long service life due to the contactless and wearless measuring of position magnets
* Digital transmission is performed in Gray-Code, so that simple cabling is ensured and the transmission security rises
* For use in hydraulic cylinders, industrial automation lines or machine construction industry
Description for GEL 177 Absolute Linear Scale:
* Long service life due to the contactless and wearless measuring of position magnets
* Digital transmission is performed in Gray-Code, so that simple cabling is ensured and the transmission security rises
* For use in hydraulic cylinders, industrial automation lines or machine construction industry
Description for GEL 220 Incremental Linear Scale:
* 5-year-guarantee on production defects
* Robust system for harshest conditions
* Ideal for application in wood and metal manufacturing (plate shears, presses, cylinders)
* Ideal for application in food and chemical industry
* Anticorrosive and wear-resistant measuring system
* Dirt wipers on the encapsulated measuring system
* Simple mounting
* Maintenance-free
* Dew-point-proof
* The measuring rods may be shortened to any length
* Reference mark integrated (zero signal)
|
|
Standard industrial applications:
Gage head diamètre 8 mm, short stroke.
stroke to (until) 300mm Diameter 9, 12 and 20 mm
Rugged environment applications:
Watertight, submersible up to 600 bars, transducer for hydraulic actuators. ATEX environment.
Rugged environment, sensors with guide and ball joint.
|
|
High accuracy, rugged gauges.
Suitable for installation on machines.
Magnetic principle
Excellent resistance to workshop conditions (BP:IP64). Resistant to oil, water, dust, vibration, and shock.
Accuracy: ±1 µm
Resolution: 0.5µm
Measuring range: 10 mm/0.39" and 25 mm/0.98"
High measuring force (BP/BS)
Low measuring force (BN/BL)
Easy installation
A variety of accessories available
|
|
Rugged environment applications
Watertight, submersible up to 600 bars, transducer for hydraulic actuators.
Rugged environment, sensors with guide and ball joint
Application : radioactive, offshore (ex ATEX), sensors for servo-actuators
|
|
Laser Hologage LGH (resolution 0.01 um):
- High-accuracy type with high displacement accuracy (0.1 um), high repeatability (0.02 um), and a length measuring range of 10 mm
- Optimal as a master gage of measuring instruments.
- For detailed information, leaflet is available on request.
Linear Gage LGB2 (slim type, resolution 0.1 um):
- Optimal for incorporation in equipment owing to a slim head type.
- Resolution: 0.1 um, accuracy: 0.8 um, measuring range: 5 mm
- For detailed information, leaflet is available on request.
Linear Gage LGF (resolution 0.1 um):
- A new model with a resolution of 0.1 um added to the lineup in the LGF series.
- A drastic cost reduction has achieved compared with the conventional type. Measuring range: 10 mm, 25 mm depending on the type
- For detailed information, leaflet is available on request.
|
|
Type: IZAL
Stroke: 2, 5 and 10 mm
Transducer: external
Operation: Unguided armature
Connection: cable
Linearitytol.: +-0,5% (optional 0,25%)
Operation temp.: -25° .. +85°C
Housing diameter: 4mm
Type IKAL
Stroke: 2 .. 20 mm
Transducer: external
Operation: Unguided armature
Connection: cable
Linearitytol.: +-0,5%
Operation temp.: -35° .. +120°C
Housing diameter: 8mm
Type: IKAT
Stroke: 2 .. 20 mm
Transducer: external
Operation: Spring return
Connection: cable
Linearitytol.: +-0,5%
Operation temp.: -35° .. +120°C
Housing diameter: 8mm
|
|
LDT Feedback Transducers The Linear Displacement Transducer (LDT) is a magneto-strictive device which provides analogue or digital information of actuator position through the interaction of two magnetic fields.
Applications for the LDT include closed loop feedback to achieve accurate position, velocity or motion control.
On open loop systems, an LDT may be used as a continuous, infinite resolution position monitoring device. Parker feedback systems are suitable for precision control of a wide variety of applications, including machine tools, flight simulators, injection moulding equipment and marine stabilisation systems.
Max. working pressure: 350 bar
Max. stroke: 3.5m
Standard temperature range: -40°C to 65°C
Fluid suitability: all
Special designs to customer specification.
Click here to view catalogue page
|
|
|
Optimum performance for industrial applications - this is what the Temposonics R-Series offers. As a high-end product, the series is the racehorse of MTS. Powerful electronics and unrivalled immunity against interference are a warranty of high-accuracy measurement results.
|
|
|
The E-Series is the basic sensor in the product range of magnetostrictive position sensors. An excellent price/performance ratio is an unbeatable asset even for traditional users of different position measurement technologies.
|
|
POSICHRON is an absolute, contact-free and wear-free position measuring system. It is extremely sturdy making it suitable even for applications where other measuring principles would fail. The availability of various constructions - quad profile housing, flat profile, stick design, rod profile - means that the system can be adapted to suit all kinds of installation conditions.
Technical advantages:
Absolute measuring principle, totally wear- and maintenance-free, resistant to dirt humidity and dust, protection category to IP68, highly resistant to vibration and shock, resolution is virtually unlimited, linearity of up to 0.01%, no energy feed for positional magnets, measuring lengths of up to 5,750 mm.
The areas of application for POSICHRON positional sensors are wide and varied. They are used in e.g. injection-moulding equipment, dosing and mixing systems, die-casting machines, road vehicle tests, hydraulic cylinders and presses, fill-level measuring equipment etc.
|
|
IK1A Displacement transducer contactless measurement using magnetostriction (ANALOG OUTPUT)
Absolute type transducer
Displacements from 100 to 4000mm
Working temperature range: -40...70°C
Vibration resistant (DIN IEC68T2/6 12g)
Rod, nipple, exagonal flange AISI 316
IP67 Protection
EMI CE compatible (EN 50081-2 50082-1)
Power supply 24Vdc ±20%
Optional galvanic isolation between the power supply and the output
|
|
|
Optimum performance for industrial applications - this is what the Temposonics R-Series offers. As a high-end product, the series is the racehorse of MTS. Powerful electronics and unrivalled immunity against interference are a warranty of high-accuracy measurement results.
|
|
The S953 VMAX Linear Displacement Transducer is the ideal solution for automation solutions requiring accurate
feedback of continuous position. It is especially recommended in environments where vibrations, extreme temperature
and contaminants are present. The S953 is an ideal solution when velocity and position need to be incorporated into the
automation control system process.
The S955 Brik linear displacement transducer is an economical solution for monitoring continuous position. It is
designed for OEM users wishing to opt for a cost effective alternative to limit switches, proximity sensors or linear
potentiometers. The streamlined anodized aluminium extrusion houses the sensing element and the electronics. The
position is determined by the magnet which is linearly guided over the sensing element.
|
|
|
Optimum performance for industrial applications - this is what the Temposonics R-Series offers. As a high-end product, the series is the racehorse of MTS. Powerful electronics and unrivalled immunity against interference are a warranty of high-accuracy measurement results.
|
|
|
Compact construction, a reasonable price for large-series production, complete functionality and modularity: the C-Series sensors provide persuading solutions for all requirements of the OEM-market.
|
|
Magnetostrictive Position Sensors for Mobile Hydraulics: PCST25
Technical advantages:
Protection class IP69K
Compression-proof up to 400 bar
Measurement range 0 ... 100 to 0 ... 5750 mm
Position sensor manufacturer ASM has extended its successful family of magnetostrictive Position Sensors POSICHRON® with a new sensor series PCST25, which has been designed for special requirements in the field of mobile hydraulics.
The PCST25 series with measurement ranges up to 5,750mm and linearity up to 0.02% for high accuracy, can be used in an operation pressure zone up to 400bar and is already available at ASM.
The extremely robust construction of POSICHRON® sensors with up to an IP69K rating guarantees years of trouble-free operation. Due to their high electrical compatibility and extremely high resistance against shock and vibrations, POSICHRON® sensors are best suited for applications in extreme hostile environments, such as with off-road construction equipment.
|
|
|
|
|
|
MTS has developed the Temposonics M series especially for integration into hydraulic cylinders. The sensor is protected against shock, vibration and extreme environmental conditions and offers an unrivalled measurement rate, outstanding repeatability (better than +/- 0.005%) and stable linearity (better than 0.04%). External effects on the measurement signal are virtually excluded by interference suppression for HF electric fields up to 200 V/m, vibration resistance up to 30gav and shock resistance of more than 100g. Changes of the hydraulic oil during operation are without effect on the measurement. The magnetostrictive technology of Temposonics sensors was invented by MTS and widely used and well proven in stationary industrial applications for many years. The magnetostrictive measurement principle is a warranty for wear and maintenance free absolute, contactless position measurement.
Temposonics MH offers continuous measurement of both - position and speed - during the position change. The integrated sensor electronics permits parameter adjustment for evaluation of the cylinder piston speed and end position attenuation can be omitted. Due to the output of a velocity signal, highly dynamic control of the movement profile of several independent hydraulic cylinders is possible for the first time. It enables the power actuators to be developed into complex movement axes and permits realization of high-quality control systems. With electro hydraulic parallel guidance of excavators or loaders, for example, Temposonics offer high signal quality and simple analogue transmission due to screening and a short signal lead.
|
|
|
|
