|
|
|
|
|
|
ipper scissors
Marrel is the inventor of Tipper scissors.
It has extensive experience in designing and producing tipper scissors mounted on industrial vehicles from 3.5 to 32 tons.
The Marrel range includes scissors for rearside tippers, two-side tippers and three-side tippers and underframe cylinders suiting customer' needs up to the most rigorous uses.
The intelligent design of Marrel high pressure cylinders, combined with the proficient technologies used to develop and manufacture them, result in a product range thoroughly adapted to professional users' requirements for efficiency and productivity.
Marrel's strong reputation is based on the performance and reliability of its products.
The selection of appropriate materials (very high tensile steels) combined with total control of sheet metal working, guarantee the durability of its products.
The streamlined design and high quality materials used in the production of Marrel tipper scissors ensure very high performance and long service life.
|
|
|
Starke Arvid Waste Tipper is a lift that is to be connected to the container´s edge. The container is then lifted up and emptied automatically. No personnel are required for the container and resources such as cargo loaders and cranes are freed to be used for other purposes. This will reduce the non-profit time on construction sites. The waste tipper is adapted for most available containers on the market and thanks to its high load capacity copes with most recycling materials without any problems. When recycling stations are arranged, the Waste Tipper can be used to advantage since the Waste Tipper can easily be moved laterally between many containers.
|
|
STANDARD BOUNCER OF DUSTBIN VD
Apparatus allowing to empty your dustbins in large buckets.
Simple of use and in conformity with the European standards.
Characteristics:
Maximum loading: 300 kg;
Swing angle 135°;
Loading of the dustbins manually;
Duct of discharge integrated into the receptacle allowing to channel well the product during discharge;
Interior use or outside;
Restraint system according to your dustbin;
Latticed side protectors height 2400 mm;
Flap valve pilot-operated with the foot of the cylinder;
Possible adaptations:
Dimensions of the vacuum dustbin according to your dustbins;
System of gripping according to your dustbins (taken frontal, by pivot; or other);
Height of discharge to be defined according to your need;
OPTIONS:
Doors controlled on the back part;
Cycle automatic;
Wheels;
Color with the choice;
Supply voltages to the choice;
|
|
1025 Tilt Truck, Standard Duty (Rotational Molded)
Industrial strength construction transports heavy loads with ease.
- Easy to handle and maneuver through commercial doorways and onto elevators.
- Constant force design allows for controlled dumping by one person.
- Inset wheels on 1/2 cu. yd. (.4 m3) and 1 cu. yd. (.8 m3) models protect walls, fixtures and patrons.
- Smooth surface is easy to clean and resists pitting and corroding.
- X-Colors (Blue, Yellow and Red) available on selected SKUs. Contact customer service for details.
- Optional domed lids available.
|
|
Dumpers bouncers of crates of the type "ROTOVID"
Apparatus allowing the integral emptying of the crate
Loading by pallet truck or forklift truck
Swing of 135° or 150°
Charge with 250 to 1500 kg
Assembled control/descent by knob with maintained contact
Electrohydraulic swing
Controlled electro valve fixed on the cylinder
Side grates of protector
Doors postpones with contact of safety
EC normalizes
Option:
Protector by light curtain
Semi control automatic or automatic
Dimensions of receptacle
|
|
The parts to be oriented are delivered to you in: containers, cases, boxes, loose or in bags.
You need to tip the parts into orienting hoppers which will supply the vibratory bowl feeders.
|
|
Tipping bodies
RCI series
The RCI tipping body series is used to tip and unload industrial caissons which can hold up to a maximum of 3000kg and a rotating angle of 130° maximum; the loading of the caisson is carried out by using a lift truck or a transpallet.
RCI-TCV series
By applying a hopper with a vibrating channel which doses the pieces towards the interlocking point to the base model, it is possible to realise tipping bodies with vibrating dosers. This series of equipment has an oleo-dynamic action.
This equipment can be adapted to the different needs of the customer, for example:
For encumbrance needs, on request it is possible to realise side loading tipping bodies.
The upward and downward speeds are singularly regulated and on request can be supplied, completed, with an emptying cycle.
The models are available with adjustable feet or with wheels.
The unloading hopper can be supplied in a fixed position or with variable angles.
|
|
System of edge of line allowing the slope of any type of container by gravity or assistance with slope until 85° according to the versions.
- The spillplates can be plane or with plan inclined according to the needs.
- Conceived to facilitate the manual operations of taking away out of container. Charged, the inclinor presents the case to 30 or 85° according to energy used (counterweight, hydropneumatic autonomous pneumatic or hydraulic).
- Vacuum is appropriate for all the types of containers. Loading only by lifting truck.
Options: casters with brake, protections fitted latticework on, immaterial barrier, Bi-manual orders.
|
|
90° tilter, the floor tilter
Brief description
In order to tilt loads through 90°. For instance, moving rolls from standing to lying position, or vice versa. For technical specifications: see PDF.
Unique principle: tilting at floor level
This makes loading at floor level possible. A pallet and/or load does not need to be delivered or taken away by fork-lift truck.
|
|
|
|
|
|
The MAX-UPENDER series is ideally suited for tipping loads up to 90 degrees. Available with capacities of 2,000 to 6,000 lbs. and a variety of standard platform sizes. The MAX-UPENDER is also available custom built for those special handling requirements. Designs of open frame, v-block, split platform and special sizes are just a few of our custom capabilities.
Features:
* 1 1/2 HP motor. 115/230 volt single phase or 230/460 three phase voltage. Motor is internally mounted on most models.
* Push button magnetic back control box is standard with 6' cord.
* 10' power cord is standard.
* Hydraulic gear pump with check valve, solenoid valve, filter and velocity fuse is standard.
* Tilt limit switch.
* Control box includes magnetic starter transformer, thermal overload and fuses.
* Designed for surface mount or lift table mounting.
* Powered up and down 90 degree tilt.
Options:
* Foot control switch
* Lowering beeper
* Remote power unit
* Accordion bellows safety skirting
* Special color
* Adjustable tilt limit switch
* Raised base
|
|
Hydraulic upenders, built by Bushman AvonTec, upend coils, molds, dies, paper rolls, cylinders and other heavy, bulky loads and turn them within a 90-degree radius. Hydraulic coil upenders handle heavy jobs smoothly and efficiently.
Bushman AvonTec designs and builds several types of hydraulic upenders with fully integrated, heavy-duty hydraulics for precise positioning. Bushman AvonTec thoroughly tests each hydraulic upender at our factory.
The hydraulic upender's power unit provides an ideal power source for secondary functions such as shifting saddles and pallet centering.
|
|
Use these pneumatic tilters anywhere that shop air is available. They require no electrical power and because they use no hydraulic fluid there is no chance of process contamination.
Features:
- 2000 - 6000 lb capacity
- 30 degree tilt standard, 35 degree tilt optional
- Air requirements 80 psi @ 15 cfm
- Pedestal mounted control standard
- Foot control available
- Optional floor stand
- Safety restraining chain to guard against over tilt
- Optional fork pockets
- Lifetime warranty on Firestone Actuator
- Optional motion stabilizer
- Custom designs available
|
|
Bin tipper of crates
Bin tipper bouncers of crates type EB
Apparatus allowing the integral emptying of the crate
Loading by pallet truck or forklift truck
Rise and swing of 135° or 150°
Charge with 250 to 2000 kg
Assembled control/descent by knob with maintained contact
Electrohydraulic swing
Controlled electro valve fixed on the cylinder
Side grates of protector
Doors postpones with contact of safety
EC normalizes
Option:
Protector by light curtain
Semi control automatic or automatic
Dimensions of receptacle
|
|
|
The dustbin tipper MT 240 is used to empty 240l plastic dustbin. Through the use of add-on components plastic dustbins from 60 to 140 l as well as 240 l aluminium dustbins for paper and data carriers can also be emptied.The dustbin carrier slide are constructed from stainless stee. The dustbin is tipped using a foot pump and it's maximum angle of 130° is reached after approx 39 pedal strokes. The tipping height is 1300 mm. 200 mm diameter wheels ensure good manoeverability.
|
|
Safetech tilters are an ideal way to accurately and safely position work. They allow containers to be tilted gradually so that parts and work are presented to an operator at an ideal height. Crates, stillages, rolls of plastic film or cable have all been safely handled with our tilters.
Available up to 2 tonne and with 90 degrees of tilt Safetech can customise tilters to fit your application.
|
|
Open or sealed transfer of solids from drums to process equipment
Flexicon "open-chute" and "lift-and-seal" drum dumper models accommodate all popular drum sizes and are available in carbon steel with durable industrial finishes, or in stainless steel with material contact surfaces finished to industrial, food or pharmaceutical standards. All models can discharge directly into process equipment or into hoppers equipped with outlets for connection to Flexicon flexible screw or pneumatic conveyors, or to other process equipment.
|
|
|
Cumberland Drum Dumpers remove material from drums and places it into your material handling system quickly and affordably. The line includes open chute drum dumpers, dust containment units, and vertical lift & dump units for extended dump heights. All equipment comes in various capacities and your choice of carbon, stainless, or aluminum material of construction.
|
|
The drum transfer system DTS is designed to discharge partial or compl drums with or without disposable system.
The operator can work ergonomically while ensuring containment.
Installation can be delivered with the following accessories:
- chassis realized tailored to your needs
- drums turner
|
|
|
|
|
|
Process Solutions manufacturers various types of material handling equipment:
Omega Lifts are our line of stationary lifters and dumpers.
Omega Mover 100-Series are our portable lifters and dumpers.
Omega Mover 1-Series are our pallet jacks, powered pallet jacks and weighing pallet jacks.
Omega Blenders are our drum and bin blenders
In addition, we also can provide the following:
Sanitary hoists/trolley systems.
Hoist attachments.
Fork Lift Attachments
External construction of the various equipment range from Stainless Steel, Painted Steel, Hastelloy, Aluminum, Iconel, Titanium and Polyethylene.
Our material handling equipment can be used with any type of item ranging from drums to bins to bowls, mixers, tanks, or boxes.
Units are available that range from completely manual in operation to units that are fully automated.
Units are available fully manual or powered by pneumatics (90 psi), standard electric (110/208/460/575) or to meet hazardous/explosion-proof environments.
Our equipment is customized to meet your requirements for capacity and functionality.
|
|
| ... products without technical information |
| |
 see the results for the following category : Dump trucks |
|
|
