Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
... hose made of nylon (KNYT), polyurethane (KPUT), or copolymer (FLEX) Materials: - Body (straight fitting): nickel-plated brass - Body ( elbow fitting): nickel-plated brass and acetal resin - Hook: ...
Diameter: 9, 6, 4 mm
... Fittings and caps The fittings described on this page are particularly suitable for connecting vacuum cup holders to their manifolds and in all those cases that require a connection to vacuum sources via smooth flexible ...
Diameter: 0.125 in
Operating pressure: 0 psi - 150 psi
... captured O-ring seal design, for leak-tight sealing at both the threaded end of the fitting and at the tubing-to- fitting interface. Beswick Push-To-Connect style fittings permit easy tube connecting ...
Beswick Engineering Co, Inc.
Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi
... PTCUL-14: Description: Fixed position 90 degree elbow union fitting, from 1/4″ OD tubing to 1/4″ OD tubing. Features All components, including the release collar, are fabricated from stainless steel, permitting ...
Beswick Engineering Co, Inc.
Diameter: 1.6 mm - 4.5 mm
Operating pressure: 0 psi - 100 psi
... Ultra miniature, fixed position elbow fitting, with 10-32 thread and built-in barb. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor ...
Beswick Engineering Co, Inc.
Diameter: 0.13 in
Operating pressure: 10 bar
... WEH® Connector TW710 for testing fuel lines (short version), grip sleeve actuation, media inlet 90°, max. 10 bar The WEH® Connector TW710 has been specifically developed to connect fuel lines for engine hot testing. The short design of the connector ...
Diameter: 3.5 mm
Operating pressure: 10 bar
... WEH® Connector TW712 for testing fuel lines, grip sleeve actuation, media inlet 90°, max. 10 bar The WEH® Connector TW712 has been specifically developed to connect fuel lines for engine hot testing. The design of the connector is best suited for narrow ...
Diameter: 20 mm - 500 mm
Operating pressure: 10, 16 bar
... Series of short and long fittings designed for conveying fluids under pressure for butt welding and electrofusion applications. ...
FIP - Formatura Iniezione Polimeri
Diameter: 50 mm - 500 mm
Operating pressure: 6 bar
... 90° bend, short spigot for butt welding PN6 SDR 17,6 - 8,3. Series of fittings designed for conveying fluids under pressure with a weld connection system (butt welding). ...
FIP - Formatura Iniezione Polimeri
Diameter: 15 mm - 100 mm
Operating pressure: 10 bar
... Series of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding). ...
FIP - Formatura Iniezione Polimeri
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar
... coupling even in the presence of pipes with diagonal cuts Made with virgin material Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. ...
A&T Fluid solutions
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 16 bar
... Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds the tube on the ...
A&T Fluid solutions
Diameter: 4 mm - 12 mm
Operating pressure: 1 bar - 16 bar
... Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds the tube on the ...
A&T Fluid solutions
Operating pressure: 10 bar
... Material - Nickel-plated brass Max. operating pressure - 10 bar Max. operating temperature heating - 120 °C ...
Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,050 bar
... Maximator Pipe Fittings are designed for liquid and gas applications. The P Series Fittings are available from 1/4” to 1”NPT to 15,200 psi (1,050 bar). NPT threads must be sealed using a high quality PTFE tape and/or ...
Diameter: 0.25 in
Operating pressure: 0 bar - 550 bar
... The Z-swivel from Exitflex is the reference in the automotive and construction industries. Its unique design provides ease of use and prevents injuries for painters and workers in all sorts of industries. Multi-directional 3-axis movement ...
Diameter: 0.5 in - 2 in
... Material - : - Aluminum Application - : - Used for cable pulling and conduit direction change in both EMT and IMC Standard - : - UL50 Certificate - : - UL Feature - : - Resistant to dust and rust, sealed and screwed ...
Diameter: 0.5 in - 2 in
... Material - : - Aluminium Application - : - External installation applications Standard - : - UL50 Standard - : - UL50 Certificate - : - UL Features - : - Resistant to dust and rust, sealed and screwed ...
Diameter: 0.5 in - 2 in
... Material - : - Aluminum Application - : - External installation applications Standard - : - UL50 Certificate - : - UL Feature - : - Resistant to dust and rust, sealed and screwed ...
Diameter: 12, 10, 8, 6 mm
... distribution . Material: nickel-plated brass Models: . RDV: Straight Fitting . RCOV: Elbow Fitting . Y: Y Fitting ...
Diameter: 0.125, 0.09, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi
... strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Type - 10-32 Swivel Elbow Wetted ...
AIR Logic
Diameter: 0.125, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi
... strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Type - 1/8-27 Swivel Elbow Wetted ...
AIR Logic
Diameter: 0.13, 0.17, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi
... strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Type - 10-32 Swivel Elbow Wetted ...
AIR Logic
Diameter: 4, 6, 0.13 mm
Operating pressure: 10 bar
The Cube Cupla, which is manufactured by Nitto, is a small and lightweight coupling for air supply lines to medical and scientific equipment. It has a compact design, and has a body made of plastic. It is ergonomic as the plug only needs to be pushed ...
... COUPLERS The external coupler [DAC-E] consists of two parts: a fixed part for connection to the plant and a movable part connected to the pump by means of an optional threaded connecting pipe. The two parts can be connected and disconnected without the ...
Zenit
... COUPLERS The bottom coupler with vertical discharge DAC-V is compact and rugged, suitable for installation in small pits. It allows the pump to be connected to the system and easily disconnected for servicing or storage even without draining the tank. The ...
Zenit
... COUPLERS DAC-V vertical discharge bottom couplers for use with pumps up to 1300 kg. Fixing by means of sliding flange or hook [KGP] (discharge DN350) with double guide pipe. A PATENTED guide pipe connection system that reduces mechanical stresses and ...
Zenit
Diameter: 6, 8, 3, 4 mm
... ANGLED FITTINGS- BARB STYLE CONNECTION ► For assembling with hose clips ► Angled version ANGLED FITTINGS- QUICK CONNECT STYLE Cost reduction through quick assembly and disassembly Angled and swivel-mounted ...
Diameter: 6 mm - 100 mm
Operating pressure: 16 bar - 20 bar
... FEMALE / FEMALE 90° ELBOW (CASTING) - STAINLESS STEEL 316 (Model : 5244) ...
BENE INOX
Diameter: 6 mm - 100 mm
Operating pressure: 16, 20 bar
... MALE / FEMALE 90° ELBOW - STAINLESS STEEL 316 Model : 5246) ...
BENE INOX
Diameter: 6 mm - 50 mm
Operating pressure: 20, 16 bar
... FEMALE / FEMALE 45° ELBOW - STAINLESS STEEL 316 (Model : 5245) ...
BENE INOX
Diameter: 20 mm - 200 mm
Operating pressure: 0 bar - 250 bar
...
- Single flow design
- Stainless steel body
- Hardened inner sealing surface
- Special design sealing components
- Easy changable repair parts+
- Weld
Diameter: 8 mm - 40 mm
Operating pressure: 0 bar - 350 bar
... - 90° Single flow design
- Carbon steel material
- Hardened inner sealing surface
- Special design sealing components
- Easy changable repair parts
- BSP, BSPP, NPT, UNF, Metric threads..
...
Diameter: 8 mm - 40 mm
Operating pressure: 0 bar - 350 bar
... - 90° Single flow design
- Carbon steel material
- Hardened inner sealing surface
- Special design sealing components
- Easy changable repair parts
- BSP, BSPP, NPT, UNF, Metric threads..
...
Diameter: 6.35 mm - 25.4 mm
Operating pressure: 689.48 bar - 4,136.85 bar
... Overview
PANAM® HP Cone & Thread
fittings cover six product families of high‑pressure
fittings: connectors, unions, adapters & reducers, directional
fittings (
elbows, tees, ...
Diameter: 3.175 mm - 50.8 mm
Operating pressure: 689.48 bar - 1,034.21 bar
... flexibility
Diameter: 4 mm - 12 mm
... Overview
SPAC AP-Series (grey) and EP-Series (black) push-in
fittings for pneumatic tubing. Compatible with polyurethane (PU) and nylon tubing. Product range includes connectors,
elbows, tees and multi-connectors ...
Diameter: 6, 4 mm
... The Ball Valve Fitting is designed for efficient fluid control in various applications. It is known for its durability and ease of use, making it a reliable choice for both industrial and commercial settings. - Durable construction for ...
Ningbo Phen Automation Co., Ltd
Diameter: 0.125, 0.25, 0.375, 0.5 in
Operating pressure: 0 bar - 12 bar
... Ambient Temperature 0~60 °C Max. Working Pressure - 1.2 Mpa Working Medium - Air. Vacuum Tube Material Nylon/PU Tube ...
Ningbo Phen Automation Co., Ltd
Diameter: 0.125, 0.25, 0.375, 0.5 in
Operating pressure: 0 bar - 18 bar
... Metail Fittings in Material Brass (Nickle Plated), SUS304, SUS316 Complete product range in various types such as Straight, Elbow, Tee, Speed Controller etc.. Complete Dimension Range ...
Ningbo Phen Automation Co., Ltd
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables cost and space ...
NIHON PISCO CO., Ltd.
Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
... Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy to press oval ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
... Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping in cleanroom, is ...
NIHON PISCO CO., Ltd.
Operating pressure: 0 bar - 15 bar
... Body Material - Plastic/Zinc alloy Operating temperature - -10-60°C(14-140°F) Working pressure - 0-1.0Mpa(0-145psi) Minimum negative pressure - -100Kpa(-14.5psi) Maximum pressure - 1.5MPa (217.5psi) Available medium - Air Applicable ...
Diameter: 10 mm - 56 mm
... Metal connector, safety-type, 90° elbow outer thread metric or PG, incl. ferrule, sealing or brass thrust collar [MSD] and O-ring Material: USW-M nickel-plated brass USW-P zinc die-casting Temperature range: -40°C ... +125°C -40°C ...
flexa
Diameter: 17 mm - 56 mm
... Metal connector, safety-type, bend 90°, metric outer thread, incl. ferrule [brass], sealing and O-ring [NBR] Properties: highly watertight and dustproof friction-type locking of conduit and screw connector correct grounding covering of the conduit ...
flexa
Diameter: 17 mm - 56 mm
... Metal connector, safety-type, bend 90°, metric outer thread, incl. ferrule [brass], sealing and O-ring [NBR] Properties: highly watertight and dustproof friction-type locking of conduit and screw connector correct grounding covering of the conduit ...
flexa
... 45° Plug female thread Material: Brass Nickel Plated Temperature Range: -20°C +100°C ( -4°F +212°F ) ...
HPS International
... 90° plug female thread Material: Brass Nickel Plated Temperature Range: -20°C +100°C ( -4°F +212°F ) ...
HPS International
... 45° straight plug for hose Material: Brass Nickel Plated Temperature Range : -20°C +100°C ( -4°F +212°F ) ...
HPS International
Operating pressure: 1,035 bar - 4,200 bar
... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...
Operating pressure: 0 MPa - 700 MPa
... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...
Diameter: 3 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...
the best suppliers