|
|
compact design
easy commissioning and programming
flat built-under mains professional filters available
IGBT power stage
detachable operating unit
rotating field frequency up to 650Hz
integrated Pid regulator
integrated PLC MANUFACTURERS
optionally with RS 232/485 interface
integrated braking chopper
integrated mains filter (class A)
integrated setpoint potentiometer manufacturers
6 multi-functional inputs
2 multi-functional outputs
for mounting onto Din track (up to 4kW)
degree of protection: IP20
|
|
The VS1SP Manufacturers of ac drive uses a traditional industrial inverter V/Hz control method. Its easy setup, quick startup, and right-out-of-the-box operation make it among the most popular variable speed motor controls. It is ideal for applications where multiple motors are operated simultaneously from one motor control, including pumps, professional fans, and general machinery applications.
|
|
| A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size. |
|
| A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size. |
|
Demag Dedrive Pro frequency inverters:
Our Dedrive Pro frequency inverters are high-performance components ranging from 1.5 to 560 kW for 380 to 690 V systems. They are the solution for a variety of requirements and firmly established their position in the industry. We have developed sophisticated extended functions for special requirements in your company - for example special professional crane functions. |
|
Variable Speed drives (VSD)/ Inverters
A wide range of inverters, either single or 3 phases, with power from 0.37 to 450 KW, input voltages from 200 to 480 Vac, with variable and/or constant torque.
Specific professional software designed for pumping installations and funs. Automatic process drivers with the possibility to control two motors independently with only one industrial inverter.
|
|
The NORDAC SK 500E by NORD - an industrial inverter of (almost) unlimited possibilities!
The SK 500E frequency inverter in book size allows for intelligent configurations to be implemented at a very favourable price.With its high functionality and numerous options the scope of possible uses is virtually unlimited.
Even the basic type has got a multiplicity of features sufficient for the majority of requirements:
four sets of parameters switchable online
sensorless vectorial current control ensuring torques of up to 400%
automatic motor parameter identification
5 control inputs to be parameterized for various digital and analogue control functions
2 digital outputs, 1 analogue output
integrated braking chopper and control of an electromagnetic motor brake
Pid regulator and industrial process controller
RS 232 & RS 485 interface
32 fixed frequencies (binary-coded)
motor potentiometer suppliers function
limit switching control
flying start
Wherever drive control is of the intricate kind the SK 520E with its extra features and options will cope: professional encoder interface (TTL)
CANopen interface
2 additional digital inputs
2 additional digital outputs
integrated safety features as per EN 654-1 cat. 3. Stop categories 0 and 1 to be available soon |
|
Numerous basic features
The NORDAC SK 700E is a universal type of frequency inverter professional fitting every application. From simple speed control to complex positioning jobs, any specific modular option that may be required is conveniently integrated inside the housing.
A high performance is ensured even by the basic functions: no-sensor current control for torques of up to 400 %
integrated line professional filter for a class A EMC standard (up to 22kW)
4 parameter sets, to be switched without disconnection
a braking chopper for dynamic electrical braking preventing wear of the brakes
the modular construction allows for customizing the unit with no extra space being required
automatic identification of the modules
connection to all current bus systems |
|
| The NORDAC trio SK 300E is a combination of geared motor and highly functional frequency inverter which enables process-oriented, decentralized system configurations to be implemented very conveniently. Designed to ensure maximum ease of handling and operation the industrial inverter is user-friendly in every respect. The inverter is provided with what can be described as an "electronic type plate" which the motor will read and permanently store with the effect that the inverter data are not lost to the motor even if the inverter is removed. As the inverter can be upgraded with a number of modules within the scope of a well thought-out concept, appropriate control components are available to establish the optimal configuration for any process to be controlled. |
|
The Vacon NXS is a compact Supplier of ac drive in the power range of 0.37-560 kW and supply voltages of 208-690 V for heavy use in machines, professional buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Trip-free operation is also guaranteed due to sophisticated motor control principles and motor/drive protection features, component selection and effective cooling. |
|
CFW 08
Power rating: 0.25 to 20HP (0.18 to 15kW)
Industrial power supply: 200
240V and 380
480V
V/Hz (scale) or sensorless vector control
Sinusoidal PWM modulation Space Vector Modulation
Emc filters (built-in)
Modbus RTU communication (built-in), CANopen, DeviceNet and Profibus-DP (optional)
PID regulator
DSP control
Remote keypad (HMI)
CFW09
Power Rating: 1.5 to 1500 HP (1.1 to 1250 kw);
Power Supply: 200
240 V, 380
480 V and 500
600/690 V;
V/Hz (Scalar), sensorless vector or closed loop vector control;
Optimal braking;
32 Bits RISC microprocessor;
Regenerative industrial converter (optional);
EMC professional filters (optional);
Fieldbus communication: PROFIBUS-DP (optional), Device Net (optional),
Device Net Drive Profile (optional), METASYS N2 Johnson Controls
(optional) and MODBUS RTU (built-in);
IP 20 enclosure up to 500 HP (315 Kw);
MANUFACTURER OF PLC and positioning control functions board;
Optimal flux function - a unique solution providing rated torque at low
speeds without forced ventilation on motor oversizing.
CFW10
Power rating: 0.25 to 3HP (0.18 to 2.2kW)
Power supply: 110
127V and 200
240V
Rated output voltage: 200
240V
Single phase power supply
Sinusoidal PWM modulation Space Vector Modulation
Latest generation IGBT modules and electronic circuits with SMD components
DSP control
Compact dimensions, simplified installation and operation
Speed adjustment via potentiometer is available |
|
| Building on Yaskawa's world leading innovative design principles, the portfolio solution of inverter drives boasts everything from the micro J7, through application-dedicated drives such as the L7, up to the most advanced 3-level vector-control G7 frequency inverter. |
|
Compact design/ fully digital control
PTC-input
Simple copying of parameters (optional unit)
Automatic self-optimization
Detachable operating unit
Dynamic torque vector control, control range 1:1200
High breakaway torque with extensive control functions and options
Max. Rotating field frequency CT:400Hz, VT:120Hz
Flying restart function in both directions
Integrated PID-controller
DC brake
Integr. Braking chopper up to FUS 750/3G11S
Degree of protection IP 40
Integrated RS 485
|
|
The HF25 Series controls address the challenges of microjoining. Miniature welds are highly sensitive to small heat profile fluctuations in the resistance splicer process. Overheating deforms and destroys parts, while under heating results in a weak, unacceptable bond. To achieve consistent, reliable welds of small to microminiature parts, precisely controlled heating is required. This necessitates superior control of the energy output.
|
|
Sumitomo HF430 AC Drive incorporate a three-drives-in-one design philosophy. Simple V/F control allows a 10:1 constant torque speed range and is suitable for many applications. Switch to Sensorless Vector (SLV) contol by simply changing a parameter value. SLV control offers a 120:1 constant torque speed range and ฑ0.5% speed regulation.
Closed-Loop Vector (CLV) control is available by installing a low-cost professional encoder feedback card and changing a parameter value. Of course, the motor must be equipped with a suitable encoder. CLV control dramatically improves performance. A 1000:1 constant torque speed range with ฑ0.05% speed regulation can be achieved. In addition, Closed-Loop vector control can produce full torque at zero speed, if necessary.
HF430 Industrial ac drives are available from 1/2 to 75 HP, 200-240V and 1 to 75 HP, 380-480V and are suitable for 50 Hz or 60 Hz operation.
|
|
AF-300 C11 Mini-Micro Drive
The AF-300 C11 drive is designed for use in small machines such as professional fans and conveyors supplier, as well as other machines in which motor speeds can vary. The AF-300 C11 series is available in thirteen models, from 1/8 to 5 hp, allowing you to select the model that best suits your application.
Features and Benefits:
Built-in manufacturer of terminal block
Requires only power and motor connections for use
Easy-to-use keypad panel
Program drive and set output frequency
9Quick response time
Reliable operation against load fluctuation
elf-diagnostics
Shut-off protection and fault failure messages
Standard frequency setting POT
Allows quick adjustments
Applications:
Fans
Conveyors
|
|
"Unit modularity" and "smaller dimensions" are two of the most important criteria when selecting a frequency inverter for a specific application. SEW-EURODRIVE is aware of these requirements and, as a result, has designed a compact and economic solution with its target-specific development of the MC07 series: MOVITRACฎ B the next generation frequency industrial inverter.
Your advantages
High-quality system components
High power range across all supply voltage ranges
High EMC protection
Simple operation and startup
Excellent price/performance ratio
|
|
The frequency industrial inverter programs ECO-line, OPTI-line and PROFI-line consistently follow the same principle in the range of 0.2 to 90 kW as the Watt Drive modular drive systems.
These frequency inverters distinguish themselves through their excellent control features, compact size, ease of use and very good communication skills.
The differences in the three programs are mainly found in the control features and the related dynamics, starting torque and scope of application.
The L types are controlled by V/f characteristics and the V types are vector-controlled frequency inverters, while the P series is outstanding in its decentralized intelligence, for example for positioning.
With this program extension, Watt Drive is able to offer a complete range of modular drive control units and the most cost-effective drive solution for any requirement, from simple control and drive tasks to the control of top dynamic processes and positioning. |
|
Variable Speed Drives
GE Consumer & Industrial introduces a complete new line of feature packed drives. |
|
Frequency inverters
The right solution for a wide variety of tasks
Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and we can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Our drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW.
The new generation of Lenze frequency inverters is now here - with the L-force 8400 drives! |
|
Variable speed transmission assembled on engine: TECHNOVAR.
the TECHNOVAR is a frequency converter which adapts on all the standardized standard engines. It is fixed on the top, side ventilator to be cooled. Simple to implement, it allows a variation speed to obtain a flow with constant pressure or a variable pressure with constant flow with a high degree of accuracy of adjustment. The parameter setting is easy and the visualization of the data is done locally on screen with liquid industrial crystals. Very useful to optimize the operation of the supplier of centrifugal pumps with substantial energy saving on the installations of overpressure, treatment of water, heating, air-conditioning or of systems of filtration or opposite osmosis.
Range of power:
- On engine up to 22 kw.
- In mural version up to 45 kw.
Available in all the current tensions and frequencies. |
|
Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and we can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Our drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW.
|
|
With a range of powers, functions and characteristics unequalled, the variators and starters Allen-Bradley and Reliance are ready to meet all your requirements in automation. Since the small scalar variators until the integrated great systems, the whole of the products of variation speed turnover and c.c Allen Bradley and Reliance bring to your engines flexibility, the reliability and the precision of order necessary to the progression of your company.
|
|
Our digital AMKAVERT frequency inverters offer compact dimensions, a variety of functions and high operating comfort in a power range from 0.2 kW to 315 kW.
The efficiency and flexible application options make AMKAVERT an intelligent component of your drive system. |
|
With ECODRIVE Cs, Rexroth proposes a generation of servos AC in the beach of low power from 100 to 750 W.
The compact variators are satisfied d’ a mono and three-phase network with a tension d’ entry being able to reach 230V.
Teams of modules of communication to interface SERCOS, Profibus DP, DeviceNet or analogical and parallel interface, they are ideally adapted to l’ use in systems with multiple axes with interconnection and can be also used in so much qu’ intelligent single axis connected by bus of standardized ground. The software of startup intuitive on basis Windows, DriveTop, allows l’ user to parameterize the apparatuses easily. L’ interface SERCOS allows moreover l’ use without problem in the control devices SYNAX, VISUALMOTION, IndraMotion MTX and in the ordering of professional robot RHO 4.
|
|
... see all the products in the category
AC drives
|
|
