Linear guides

240 companies | 1266 industrial products

Companies per page

ACCURATE BUSHING SMITH-TRAX®
Rail SMITH-TRAX® ACCURATE BUSHING

Precision Manufactured SMITH-RAILS drastically reduce...

1 products Airbravo
1 products SmarAct GmbH
SmarAct GmbH 4D
Linear and rotary positioning stage 4D SmarAct GmbH

This 4D manipulator consists of two SLC-2490-S positioners...

5 products Fumex AB
Fumex AB APS
Rails with extraction arm APS Fumex AB

The ideal exhaust rail for workplaces with moving vehicles With its unique design and profile rail, APS has the lowest pressure drop on the market. The profile rail both functions as an exhaust...

Fumex AB max. 6 m | AFS
Rail for extraction arm max. 6 m | AFS Fumex AB

Functional hose rail for workplaces with moving vehicles Ideal for vehicle repair and inspection stations, with rail lengths of up to 20 m Stable...

Fumex AB 4 - 10 m | AFSU
Rail for extraction arm 4 - 10 m | AFSU Fumex AB

Exhaust rail for emergency vehicles with vertical exhaust pipes Fully automatic connection and disconnection to/from vertical exhaust...

Fumex AB max. 6 m | AFSH
Rail for extraction arm max. 6 m | AFSH Fumex AB

Exhaust rail for emergency vehicles with side-mounted exhaust pipes Stable design consisting of a load-bearing aluminium profile with an integrated guide rail Simple installation...

Fumex AB max. 6 m | AFSA
Rail for extraction arm max. 6 m | AFSA Fumex AB

Exhaust rail for smaller emergency vehicles with side-mounted exhaust pipes Fixed extractor with guide rail and balancing block A combination...

P.T.M. PRODUKTION technisch-mechanische Geräte GmbH max. 25 mm | LM series
Linear module max. 25 mm | LM series P.T.M. PRODUKTION technisch-mechanische Geräte GmbH

The PTM-Linear Modules LM work with our PTM-Actuators. In contrast to the normal linear units, the PTM-Linear Modules use a crank. Therefore there are many advantages. This causes a sinucidal move of...

P.T.M. PRODUKTION technisch-mechanische Geräte GmbH max. 30 mm | LM series
Linear module max. 30 mm | LM series P.T.M. PRODUKTION technisch-mechanische Geräte GmbH

The PTM-Linear Modules LM work with our PTM-Actuators. In contrast to the normal linear units, the PTM-Linear Modules use a crank. Therefore there are many advantages. This causes a sinucidal move of...

P.T.M. PRODUKTION technisch-mechanische Geräte GmbH max. 52 mm | LM series
Linear module max. 52 mm | LM series P.T.M. PRODUKTION technisch-mechanische Geräte GmbH

The PTM-Linear Modules LM work with our PTM-Actuators. In contrast to the normal linear units, the PTM-Linear Modules use a crank. Therefore there are many advantages. This causes a sinucidal move of...

P.T.M. PRODUKTION technisch-mechanische Geräte GmbH max. 90 mm | LM series
Linear module max. 90 mm | LM series P.T.M. PRODUKTION technisch-mechanische Geräte GmbH

The PTM-Linear Modules LM work with our PTM-Actuators. In contrast to the normal linear units, the PTM-Linear Modules use a crank. Therefore there are many advantages. This causes a sinucidal move of...

Mad City Labs Inc. max. 4 mm/s, max. 25 mm | SPMZ
Motorized single-axis linear positioning stage max. 4 mm/s, max. 25 mm | SPMZ Mad City Labs Inc.

The Nano-SPMZ integrates single axis micropositioning and high resolution nanopositioning into a compact unit which is compatible with optical tables and standard mounting accessories. Stepper...

Mad City Labs Inc. max. 25 x 25 mm | MicroStage series
Linear motor-driven XY positioning stage max. 25 x 25 mm | MicroStage series Mad City Labs Inc.

The MicroStage is a precision, stepper motor driven, micropositioning system for inverted optical microscopes or customized for special mounting requirements. Long range (25 mm) linear positioning is...

MURRPLASTIK SYSTEMTECHNIK
Rail for drag chain MURRPLASTIK SYSTEMTECHNIK

Guide channel systems for cable drag chains serve as trays for short travel distances and at the same time as guides for long travel distances. If no guide channel is used it is possible that the chain...

ATEK SENSOR TECHNOLOGIE MLC 310
Guided magnetic linear encoder MLC 310 ATEK SENSOR TECHNOLOGIE

Magnetic measuring Tape in aluminum profile Stainless...

ATEK SENSOR TECHNOLOGIE MLC420
Guided magnetic linear encoder MLC420 ATEK SENSOR TECHNOLOGIE

Magnetic measuring Integrated wear-free roller guide with steel ball bearings on steel rod Portable...

3 products Walter Uhl
Walter Uhl
Single-axis linear positioning stage Walter Uhl

The fields of application for our linear stages LT and PT are widely spread. They are used where highest requirements on straightness deviations,...

Walter Uhl  LT series
Ball bearing linear positioning stage LT series Walter Uhl

The linear stages of the LT series are especially designed to provide high accuracy in...

Walter Uhl  PT series
Single-axis linear positioning stage PT series Walter Uhl

The linear stages of the PT series are especially designed to provide high accuracy in compact dimensions....

6 products NEW-MAT
elektropneumatische Systeme GmbH 50 - 100 mm, max. 1.5 m/s | EDM 20 P
Pneumatic linear module 50 - 100 mm, max. 1.5 m/s | EDM 20 P elektropneumatische Systeme GmbH

The linear module EDM 20 P is extremely light and dynamic. In connection with the EDM 25 it is ideal to reach short cycle times. The moving cylinder profile and a high-quality linear guide ensure a very...

elektropneumatische Systeme GmbH 60 - 360 mm, max. 1.5 m/s | EDM 25 P
Pneumatic linear module 60 - 360 mm, max. 1.5 m/s | EDM 25 P elektropneumatische Systeme GmbH

The linear module EDM 25 P is based on a profile cylinder with a prism shaped guide and eight tensioned roller bearings free of backlash. Through...

elektropneumatische Systeme GmbH 90 - 1 450 mm, max. 3.2 m/s | PM 25 EL
Electric linear gantry module 90 - 1 450 mm, max. 3.2 m/s | PM 25 EL elektropneumatische Systeme GmbH

The electric portal modules PM 25 EL are easy to assemble, program and start-up. Due to their high flexibility and dynamics they are especially suitable to perform tasks with short cycle times, long movements...

elektropneumatische Systeme GmbH 150 - 1 820 mm, max. 3 m/s | PM 30 EL
Electric linear gantry module 150 - 1 820 mm, max. 3 m/s | PM 30 EL elektropneumatische Systeme GmbH

The electric portal module PM 30 EL features double guide rails with a milled base. Therefore the module reaches a high running accuracy, high load capacity and above all a very high admissible torsional...

2 products FLEXATEC
FLEXATEC ARSW
Steel rail for drag chain ARSW FLEXATEC

Series ARSWChannelsystems out of galvanized...

FLEXATEC ARAW
Aluminum rail for drag chain ARAW FLEXATEC

Series ARAWThe new channel system...

4 products MICOS
MICOS 0.05 µm, max. 15 mm/sec, max. 7 kg | PLS-85
Vacuum-compatible linear stage 0.05 µm, max. 15 mm/sec, max. 7 kg | PLS-85 MICOS

The PLS-85 linear stages are especially suited for high precision applications with limited space conditions while allowing loads of up to 10 kg. Cross-roller bearings guarantee very high guiding stiffness. Driven...

MICOS 0.035 µm, max. 100 mm/sec, max. 35 kg | UPM-160
High-precision linear single-axis positioning stage 0.035 µm, max. 100 mm/sec, max. 35 kg | UPM-160 MICOS

The UPM-160 ultra-precision linear stage was specifically designed for wafer inspection, fiber alignment or for any other tasks where the highest positioning accuracy and reliability...

MICOS 1 000 mm, 0.1 µm, 500 mm/sec, max. 20 kg | LMS-100
Linear motor-driven single-axis positioning stage 1 000 mm, 0.1 µm, 500 mm/sec, max. 20 kg | LMS-100 MICOS

Linear stages LMS-100 are driven by linear motors and are equipped with a linear...

MICOS 0.4 µm, max. 20 mm/sec, max. 5 kg | VT-80
Linear ball screw-driven translation stage 0.4 µm, max. 20 mm/sec, max. 5 kg | VT-80 MICOS

The VT-80 translation stage is a popular laboratory stage that offers a wide range of travel lengths. A backlash-free recirculating ball bearing along with a backlash compensated lead screw guarantee...

2 products DSM
DSM ± 2 mm ;   ± 2°
Precision linear and rotary positioning stage ± 2 mm ; ± 2° DSM

3-Axis Optical Flexure Mount Dynamic Structures and Materials offers custom design capabilities for rotary and linear flexure-guided stages required for unique positioning applications and environments....

DSM
Air bearing linear and rotary positioning stage DSM

Air Bearing Motion Platforms Dynamic Structures and Materials offers custom air bearing stage design and integration for a wide array of rotary and linear applications. DSM is experienced...

1 products KOHZU
KOHZU
Precision linear and rotary positioning stage KOHZU

Kohzu’s SPU-1C low-eccentricity rotary stage was specifically developed for X-ray micro-tomography, microscopy and other demanding...

Ruchservomotor JV max. 450 N, max. 3.6 m/s | LSMA-24 series
Single-axis manual linear stage max. 450 N, max. 3.6 m/s | LSMA-24 series Ruchservomotor JV

3D model of Linear axis (with motor-carriage) LSMA -T-24-275-35-C-HT built in aluminium profile Stages are designed for motion systems that require both high dynamics and high repeatability. Advantages:...

Ruchservomotor JV max. 1 300 N, max. 4.3 m/s | LSMA-32
Single-axis manual linear stage max. 1 300 N, max. 4.3 m/s | LSMA-32 Ruchservomotor JV

Stages are designed for motion systems that require both high dynamics and accuracy. Construction: Stage consist of linear motor built on aluminium profile with linear guideways, and measuring system...

Ruchservomotor JV max. 323 N, max. 4.6 m/s | LSMM series
Single-axis manual linear stage max. 323 N, max. 4.6 m/s | LSMM series Ruchservomotor JV

Description: The linear table on the basis of synchronous motor is used for make the co-ordinate systems with high dynamic characteristics..Structurally linear axis consists of a metal profile with...

Ruchservomotor JV max. 75 Nm
Precision linear and rotary positioning stage max. 75 Nm Ruchservomotor JV

Specific features Free motion in two linear axes. Travel in X and Y axis and angular positioning with a wide band of speed, acceleration...

2 products Nippon Pulse
video Nippon Pulse max. 430 mm | SCR Series
Linear motor-driven single-axis positioning stage max. 430 mm | SCR Series Nippon Pulse

The Nippon Pulse linear shaft motor SCR Nanopositioning Stage Series offers the accuracy of piezo driven stages with the speed and performance...

video Nippon Pulse max. 18.5 N | SLP Series
Linear motor-driven single-axis positioning stage max. 18.5 N | SLP Series Nippon Pulse

A high-precision stage for industrial applications, Nippon Pulse’s linear shaft SLP Acculine Series stages offer technology that is unmatched in...

Optosigma Corporation
Manual crossed roller linear positioning stage Optosigma Corporation

Aluminum Crossed Roller Bearing Stages * Lightweight * Crossed-roller bearings for heavy loads * Superior straightness of travel * 120, 65 and 40mm footprints * Lockable In many...

Optosigma Corporation
Ball bearing linear positioning stage Optosigma Corporation

Aluminum Linear Ball Bearing Stages * Lightweight * Precision ball bearings * Straightness of travel <3microns * 65 and 25mm footprint * 1/4-20 (M6) hole pattern * Horizontal...

Optosigma Corporation
Dovetail linear translation stage Optosigma Corporation

Preset Dovetail Stages * Set and lock in position * Hex-key adjusted * Ideal for initial setup and OEM use * X,Y,Z and all combinations * 65, 40, 25 and 15mm footprints...

Optosigma Corporation
Long-travel dovetail linear translation stage Optosigma Corporation

Rack and Pinion Dovetail Stages * Long, fast travel * Rack & pinion drive * Ideal for focus and field adjustment * 65 and 25mm sizes provide up to 130mm of travel * 1/4-20 (M6) hole...

Optosigma Corporation
Stainless steel linear positioning stage Optosigma Corporation

Stainless Steel Extended Contact Bearing Stages * Patented extended contact bearings provide high load capacity * High strength and low thermal expansion for unparalleled stability * Straightness...

Optosigma Corporation
Crossed roller motorized linear positioning stage Optosigma Corporation

Aluminum Crossed Roller Guide Motorized Stages * Compact and...

3 products Moticont
video Moticont
Voice coil linear positioning stage Moticont

The high performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required. The motorized linear stages...

Moticont
Linear motor-driven single-axis positioning stage Moticont

The Linear Three Phase Brushless Motor Driven Positioning System is used in positioning applications where high speed and high accuracy are required. The...

Moticont
Linear and rotary positioning stage Moticont

The Multi-Axis Positioning System is designed to allow direct coupling between the load and the...

3 4 5 6 7 8 9 10 11 12
Filter by :
Refine the search
Linear guides
Extend the search
Search by manufacturer
Search by catalog
Associated Terms

linear slides, industrial linear guides

With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.