Load cells

127 companies | 1403 products
Force sensors
  • What’s new?
  • Type
  • Technology
  • Configuration
  • Output signal
  • Material
  • Material characteristics
  • Size
  • Protection level
  • Product application
  • Domain
  • Application
  • Other characteristics
shear beam force sensor - BFS-105

The force transducer works according to the strength measuring principle on a transverse basis to the longitudinal axis.

The BFS-105 is designed for application at conveyor scales, bin-type weighing devices, platform scales and overhead conveyor scales, but can also be used for measuring...

bending beam force sensor - BKA-25

The force transducer works according to the principle of the bending stress measurement. The force introduction follows crossways to the longitudinal axis.

The BKA-25 was developed especially for the measuring of small forces (quality control, weight and...

load pin force sensor - SB-32

The load pin works according to the strength measuring principle on a transverse basis to the longitudinal axis.

The SB-32 was developed especially for strength measuring...

tension force sensor - KWZ-60

The plate load cell works according to the strength measuring principle on a transverse basis to the longitudinal axis.

The KWZ-60 is suitable for measuring of tension forces.

Attractions can be included at lifts, cranes, rope tensions to masts of radio transmitting...

precision force sensor - DMA-12A

The force transducer works according to the principle of the pressure strength measuring. The force introduction is carried...

{{productDetail[36342]}}
tension force sensor / for cranes - 2.5 - 300 t | GS series

Features:

Standard single part line pull sizes include:
5,000 lb / 2.5 Tons
12,000 lb / 6 Tons
18,000 lb / 9 Tons
35,000 lb / 17.5 Tons
60,000 lb / 29.9 Tons
100,000 lb / 49.9 Tons
170,000 lb / 85 Tons
250,000 lb / 125 Tons
300,000 lb / 150 Tons
400,000...

load pin force sensor / for cranes - GS series

Features:

* Custom sizes available on request
* Direct Sequence-Spread Spectrum-Two Way Communication
* Transmission Range: 4,000 feet; 1,300 meters
* Ships as standard with 1-"D" Cell lithium battery,...

{{productDetail[65001]}}
shear beam force sensor / steel / nickel-plated - 200 - 2 000 kg | K10S series

The K10S are low profile single ended shear beam type load cells with low-level design. They have been developed as an very flat alternative to the existing shear beam...

shear beam force sensor / stainless steel - 1 000 - 5 000 kg | K20N series

The K20N single ended shear beam type load cells are one of the widely used sensors in the field of weighing technology. The load cells are manufactured from stainless steel and characterized...

shear beam force sensor / steel / nickel-plated - 1 000 - 5 000 kg | K20S series

The K20S shear beam type load cells are one of the widely used sensors in the field of weighing technology. The load cells are manufactured from alloy steel, nickel plated and characterized with high accuracy and linearity.
These...

shear beam force sensor / stainless steel - 500 - 10 000 kg | K24N series

The K24N single ended shear beam type load cells are one of the widely used sensors in the field of weighing technology. The load cells are manufactured from stainless steel and characterized with high accuracy and linearity.
These load cells...

shear beam force sensor / steel / nickel-plated - 500 - 10 000 kg | K30S series

The K30S single ended shear beam type load cells are one of the widely used sensors in the field of weighing technology. The load cells are manufactured from alloy steel nickel plated and characterized with high accuracy and linearity.
These load...

{{productDetail[15824]}}
compression force sensor / tension / S beam - max. 10 000 lb | R01 series

A rugged force measurement sensor for tensile and compressive forces up to 10,000 lb. Durable S-Beam architecture allows for many applications and setups. Solid...

compression force sensor - max. 10 000 lb | R02 series

Button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the R02 is ideal for heavy duty applications with space...

single point force sensor / digital - max. 1 kN | RG series

The RG smart load cell is a plug-and-play force measurement building block designed for integration within assembly systems, weighing systems, and other...

{{productDetail[15520]}}
tension force sensor - CBCS

Cardinals American-made CBCS Electronic self-checking, light capacity load cell stand kits are for floor mounted tank or...

hydraulic force sensor - GTSC series

These retrofit kits permit various Cardinals and other manufacturers truck scales to be upgraded using Cardinal American-made hydraulic load cells. Kit includes...

tension force sensor - SBCS

Cardinal’s USA-made SBCS electronic load cell kits are for use with Cardinal SB series self-checking shear...

tension force sensor / stainless steel - SW

Cardinal’s American-made Stretch Wrapper and Baler load cell mounting kits come with four or six load cells, articulating feet, stainless steel summation junction box and 30 feet of load cell...

tension force sensor / stainless steel - TBCS

Cardinals USA-made TBCS electronic load cell kits are for use with stainless steel TB load cells and offer complete tank and hopper weighing....

{{productDetail[17862]}}
bending beam force sensor - 500 - 50 000 kg | ATLP

Model: bending load cell ATLP

Capacities:...

bending beam force sensor - 500 - 20 000 kg | ATL

Model: bending load cell ATL

Capacities:...

compression force sensor - 250 - 20 000 kg | APLK

Model: compression load cell APLK

Capacities:...

tension force sensor - 100 - 100 000 kg | ABCSE

Model: tension load cell ABCSE

Capacities:...

tension force sensor - 100 - 100 000 kg | ABCSE

Model: custom load cells (material handling machine,...

{{productDetail[15276]}}
compression force sensor / tension / S beam / amplified - max. ± 10 VDC

All of our load cells and force transducers can be supplied with amplification or signal conditioning in either...

compression force sensor / stainless steel / thin - max. 540 kN | CCG series

The CCG series of low profile annular load cells (also known as donut load cells) have been designed for applications where bolt tension needs to be measured with a very low-profile transducer. They are...

shear beam force sensor / thin - max. 2 t | OSBKT series

The OSBKT series of single-ended bending beam load cells are suitable for medium capacity weighing applications such as hoppers and vessels where a highly accurate measurement system is required....

shear beam force sensor / thin - max. 5 t | OSBST series

The OSBST series of single-ended shear beam beam load cells are suitable for medium capacity weighing applications such as hoppers and vessels where a highly accurate measurement system...

bending beam force sensor / stainless steel - max. 500 kg | OBBS

The OBBS series of bending beam load cells are suitable for low capacity weighing applications such as batching hoppers where a highly accurate measurement system is required. They are...

{{productDetail[11673]}}
compression force sensor / ring - 10 - 200 kN | F202

Hardened stainless steel body
Sealed to IP65
Very high structural load limit
Tensile applications are ‘fail-safe’
Traceable calibration with certificate included in the standard price
Standard 2 year warranty

Geometry: Axial strain cylinder in a sealed case,...

compression force sensor / ring - 400 - 800 kN | F203

Hardened stainless steel body
Sealed to IP65
Standard 2 year warranty
Tensile applications are ‘fail-safe’
Very high structural load limit
Traceable calibration with certificate included in the standard price

Geometry: Axial strain cylinder...

compression force sensor / tension / universal - 10 - 500 kN | F204

Large internal interfacing threads
High structural load limit
Flying lead or connector option
Sealed to IP65
Traceable calibration with certificate included in the standard price
Standard 2 year warranty

Geometry: Axial strain cylinder in a weather sealed stainless...

compression force sensor / ring - 1 000 - 2 000 kN | F205

- Hardened stainless steel body
- Very high structural load limit
- Standard 2 year warranty
- Tensile applications are ‘fail-safe’
- Flying lead or connector option

Geometry: Axial strain cylinder in a sealed case, with raised end load bearing faces and hole...

compression force sensor / load washer - 10 - 200 kN | F207

Low profile with centre hole
Ranges to suit bolt sizes from M6 to M36
Stainless steel construction
Tensile applications are ‘fail-safe’
Traceable calibration with certificate included in the standard price
Standard 2 year warranty

Geometry: Axial strain cylinder in weather sealed...

{{productDetail[11640]}}
compression force sensor - 1 - 4000 kN | LS-3010-CL

Compression loadcells

LS-3010-CL...

compression force sensor - 1 - 4000 kN | LS-3010-CL

Tensile Load Cells

Tensile Load cells are produced to fit in...

{{productDetail[11636]}}
shear beam force sensor / stainless steel - 300 - 5 000 kg | 350i

This cell is typically used in weigh platforms, tank and vessel weighing,...

compression force sensor / single-column / high-capacity - 15 - 40 t | 740 series

This self centering column load cell is manufactured from high quality stainless steel and has a high...

{{productDetail[25109]}}
single point force sensor - 0.2 - 3 kg | AMO series

APPLICATION : Mono-cell scales whose platform is
...

single point force sensor - 3 - 60 kg | AM series

APPLICATION : Mono-cell scales whose platform is up
...

single point force sensor - 10 - 150 kg | AM1 series

APPLICATION : Mono-cell scales whose platform is
...

single point force sensor - 100 - 1 000 kg | AM2 series

APPLICATION : Mono-cell scales whose platform is
...

single point force sensor - 100 - 500 kg | AM24 series

APLICATION : Mono-cell scales whose platform is up
...

{{productDetail[24257]}}
tension force sensor / heavy-duty - U series

U Series under pillow block load cells offer extreme protection &...

roll force sensor - max. 500 lb | ES series

A stainless steel body and IP54 rating, combined with industry...

roll force sensor - X series

X Series load cells are designed for applications utilizing cantilever rollers...

roll force sensor - 10 - 1 000 lb | ES series



Designed for use with live shaft rollers, ES Series Live Shaft Load Cells...

roll force sensor - max. 1 000 lb | ES series



Designed for use with live rollers, ES Series Live Roller Load Cells...

{{productDetail[19695]}}
single point force sensor - max. 30 Kg | SPO series

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 300x300 mm.
CAPACITIES...

single point force sensor - max. 36 Kg | SPG C6

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell; maximum platform dimensions of 450x450 mm.
CAPACITIES...

single point force sensor - max. 500 Kg | SPM series

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell; maximum platform dimensions of 600x600 mm.
CAPACITIES...

bending beam force sensor - max. 500 kg, ATEX | FXC series

Bending beam load cells for approved weighing, automatic systems, dosage.
CAPACITIES (kg): 10, 20, 50, 100, 200,...

bending beam force sensor - max. 500 kg, ATEX | FXD series

Bending beam load cells for approved weighing, automatic systems, dosage.
CAPACITIES (kg): 100, 200, 300, 500....

{{productDetail[22517]}}
single point force sensor / stainless steel - 7.5 - 200 kg | PC1

The type PC1 is a stainless steel single point load cell with an improved
potting. It is suitable...

single point force sensor - 20 - 150 kg | PC2

The type PC2 is a stainless steel single point load cell with complete hermetic sealing. It is a perfect...

single point force sensor / stainless steel - 2 000 kg | PC2H

The type PC2H is a stainless steel high capacity single point load cell with
complete hermetic sealing. It is a...

single point force sensor / stainless steel - 7 - 150 kg | PC3

The type PC3 is a stainless steel single point load cell with an improved...

single point force sensor / stainless steel - 10 - 200 kg | PC6

The type PC6 is a stainless steel single point load cell with complete hermetic sealing. It is a perfect fit for use...

{{productDetail[33050]}}
block force sensor / for web tension control - 2 - 200 kN | BZH-K series

BZH-K
Large rigid sensors for demanding force measurement applications in the metal and...

block force sensor / for web tension control - 5 - 200 kN | BZV-K series

BZV-K
Large rigid sensors for demanding force measurement applications in the metal and...

block force sensor / for web tension control - 0.16 - 6.3 kN | BZH - BZHB - BZH-K00

BZH, BZHB, BZH-K00
Rugged versatile web tension sensors for multifunctional applications in the textile,...

block force sensor / for web tension control - 0.1 - 0.5 kN | BZH-A - BZV-A series

BZH-A + BZV-A
Small pillow block load cells for finishing web applications
...

roll force sensor - 0.1 - 5 kN | BZA series

BZA
User-friendly aluminium sensor for a broad range of applications.
...

{{productDetail[50745]}}
single point force sensor - HI SPx series

The Hardy HI SP Series of single point load cells are designed for the OEM, conveyor and bench scale markets, which require a low sensitivity to off center loads. They are built to perform in the harsh...

compression force sensor - max. 450 lbs | LPB

The Hardy HI LPB ADVANTAGE® Series, sliding load point/weigh module system is designed for use on light to medium capacity vessels. Each weigh module consists of mounting hardware and a stainless steel mV/V and mV/V/ohm matched load sensor with true hermetic sealing, C2®...

compression force sensor - max. 22 500 lbs | HLPS

The Hardy HI HLPS ADVANTAGE® Series, sliding weigh module or load point/weigh module system (load cell plus assembly) is designed for use on medium to high capacity vessels.

Each weigh module consists of mounting hardware and...

compression force sensor / thin - max. 50 000 lbs | LPRA

The Hardy HI LPRA Advantage® Series, Low Profile, rocker load point systems are designed for use on high capacity vessels.

Each load point consists of mounting hardware and a stainless steel mV/V, mV/V/ohm matched,short rocker type load sensor with true hermetic...

compression force sensor / thin - max. 110 000 lbs | HI LPRC03

The Hardy HI LPRC03 ADVANTAGE® Series, Low Profile, rocker load point systems are specially designed for high capacity hopper and tank weighing. They are easy to install by bolting or welding, have a lower profile, and provide...

{{productDetail[37505]}}
compression force sensor / precision - max. 20 000 daN | AD

Range from ± 500 ± 20000 daN
Stainless steel
General...

compression force sensor / tension / S beam - 10 - 500 daN | CDP series

Overload stopper included on low capacity side
Tension - compression
...

compression force sensor / tension / S beam - 1 - 25 daN | F 108 TC

F 108 TC - Miniature force sensor:

* Range from ± 1 to ± 25 daN
* Tension...

tension force sensor / compression / miniature - max. 10 000 daN | F 402 C

Compression from 500 daN to 10,000 daN
Miniature
...

tension force sensor / compression - max. 2 000 kN | F 405 TC

Range from ± 100 ± 2000 KN
Tension - compression
High elasticity steel
...

{{productDetail[37502]}}
load pin force sensor - 10 - 100 N | FG100

Application
•Sensor for measuring force, such as push, pull, etc.
Features
•By combining with digital display separately, FP/FG sensors eliminates disadvantages of...

{{productDetail[61571]}}
tension force sensor / compression - DV

Industrial single point load cell
For either tension or compression
Several...

tension force sensor / compression - D

Industrial single point load cell
For either tension...

tension force sensor / compression - TDC

Standard loadcells

Based on a longtime experience, Peekel Instruments can deliver a wide range of standard...

{{productDetail[57048]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation