Compact load cells

... including flexures, provides unusual structure strength & to minimize crosstalk between the two transducers Honeywell’s X-Y force sensor is constructed of two strain gauge bridges mounted at 90° and ...

Rated load: 200 lb - 100,000 lb

... cost-effective, general purpose, carbon steel, pancake load cells offer a compact design that features exceptional structural capability to withstand extraneous loads, ...

Rated load: 120 g

... resolution as high as 10 mg Metal overload stopper built in Deadweight up to 80 percent of capacity Moisture proof Compact and lightweight

Rated force: 0.6 kgf - 15 kgf

... zero and span from -10 °C to +40 °C/+14 °F to +104 °F Deadweight up to 80% of capacity. Load weight and deadweight up to 180% of capacity Moisture proof Compact and lightweight Can be used for ...

Rated force: 10 kgf - 150 kgf

... and span from -10 °C to +40 °C (+14 °F to +104 °F) Deadweight up to 80 % of capacity. Load weight and deadweight up to 180% of capacity Moisture proof Compact and lightweight

Rated force: 50 N - 25,000 N

... mechanical stop for the overload protection which is integrated in our load cells. The CF.85 load cells is also available in some special version such us: the CF.85 ...

Rated force: 250 N - 30,000 N

Compact, versatile and reliable, the CK load cells offer an alternative to the others manufactured by Re and are used for through shaft assembly application. The CK load ...

Rated force: 50 N - 1,000 N

A-3 load cells, fitted at the end of a measuring roller, can precisely detect the resultant of the forces generated by pulling of the material depending on the winding angles. A-3 load ...

Rated force: 0 N - 200,000 N

The 8524 precision tension & compression load cell is a versatile sensor for highly accurate load measurements in diverse applications. Optimum measurement quality is achieved with the ...

Rated force: 0 N - 5,000 N

Ultra-miniature load cell - 8416 Due to their extremely compact design, these load cells can be used wherever static or dynamic load ...

Rated force: 0 N - 100,000 N
Height: 12.7 mm - 48 mm

Miniature tension-Compression load cell-8431, 8432 These models are among our most precise and yet mechanically robust miniature load cells. ...

Rated load: 50 kg - 1,000 kg
Height: 34 mm

The CU range of load cells are designed for the measurement of static or dynamic loads in compression. All the transducers are calibrated as load cells ...

Rated load: 500 kg - 5,000 kg
Length: 130, 171.5 mm
Height: 32, 48 mm

... series of load cells is the deformation caused by the shear generated by the applied load. They are compact load cells with an all ...

Rated load: 500 kg - 10,000 kg

The load cell PR 6212 is a state-of-the-art product. This corrosion resistant load cell has a compact design and also features high heat resistance. ...

Rated load: 30 kg - 10,000 kg

Load cell capacity range from 30 kg to 300 kg. Specially designed for tank and hopper weighing as well as basic dosing systems. For use in EX zones 1, 2, 20, 21, 22 and FM DIV 1. Compact ...

The digital Pendeo® Truck load cell is the optimal solution for weighbridges. Its takes the performance of our products to the next level and makes the setup, calibration and operation of weighing systems ...

Rated force: 0 N - 5 N

Product Description The MBB-02 Miniature Force Sensor is designed for micro-measurement. It is used by many high end watch manufacturers for measuring the friction in the movement ...

Rated force: 0.5 N - 20 N

Product Description The Magtrol MBB-01 Miniature Force Transducers are designed for the measurement of very small positive and negative charges. Entirely made of aluminum, ...

Rated force: 50 N - 1,200 N

Product Description Magtrol DB-DA and DB-DC transducers are designed for measuring radial forces in ball bearings. Available in several diameters and temperature ranges, these transducers incorporate strain gauge technology and provide ...

Rated force: 1,000 N - 20,000,000 N

High Capacity Load Cell DPU series (High Capacity) Load cell DPU series is high capacity type for both tension and compression testings ...

Rated force: 50 N - 2,000 N

... series load cell is designed especially for incorporation into equipment/facilities. -You can easily screw it to mount on your equipment/facility with 2 M8 screws (female). -The sensor size is only ...

Rated force: 500 N - 20,000 N

... the load cell is designed to perform reliable force measurement. -The inert gas filled in the sealed-structure sensor reduces external influences. -The stainless body also supports the reliable measurement. Second, ...

Rated force: 10 N

... KM200 Shear beams in very small designs in IP65 with aluminum body for 10 N and 50 N Very compact design Robust load cell in aluminium Very small ...

Length: 68 mm
Height: 29 mm

Shear Beam Force Sensor - KT703 The KT703 force transducers are characterized by their compact design, although they have an integrated digital ...

Rated force: 200 N - 1,000 N
Length: 68 mm
Height: 28.7 mm

Shear beam force cell - KM701 The force transducers of the KM701 series with aluminium measuring body up to 1 kN work according to the principle of the double bending beam and are ...

Rated force: 10, 5, 1, 2 kN

The electrical force transducers of the model series TesT 302 are often used when cramped spaces and high standards occur at the same time. These sensors, which are made of stainless steel, are available ...

Rated force: 1 kN - 50 kN
Length: 35, 40, 45, 50 mm

The miniature force transducers of the model series TesT 304 are used almost everywhere, where existent space capacities provide no other opportunity. Due to their compact ...

Rated force: 500 N - 20,000 N

The miniature force transducers of the model series TesT 305 are used almost everywhere, where existent space capacities provide no other opportunity. Due to their compact ...

Rated force: 0 N - 2.7 N

... The special design of the force cell ensure batch production and with fully automated assembly an ideal performance to cost ratio for high quantities. Fixed order quantities on request Compact construction ...

Rated force: 50,000 N

Button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the R02 is ideal for heavy duty applications with space constraints. Features and specifications •Member ...

Rated force: 1 N - 500 N

Extremely compact force measurement sensor for tensile and compressive loads in applications with limited space. The Series R04 is available in capacities from 0.25 to 100 lbF (1 to 500 N). Every capacity ...

Rated load: 0.1 t - 5 t

The robust and well-designed load cell from General Measure, with the C3 grade accuracy. GML-DHH3 S type load cell has the material option with alloy steel and stainless ...

Rated load: 0.1 t - 5 t

The robust and well-designed load cell from General Measure, with the C3 grade accuracy. GML-DHH3C S type load cell has the material option with alloy steel and stainless ...

Rated load: 10 kg - 1,000 kg

The robust and well-designed load cell from General Measure, with the C2/C3 grade accuracy. GML-DHH5 bending beam load cell has the material option of alloy steel and ...

Rated force: 10 N - 2,000 N
Length: 2 m

... compression. “S” load cells provide superior performance in compact packaging. Connected with ACRN measurement consoles. Benefits Tension & compression Mechanical stop IP ...

Rated force: 1 N - 5 N
Length: 2 m

... overloads in tension and compression. “S” load cells provide superior performance in compact packaging. Description Benefits Tension & compression Mechanical stop Options Rings ...

Rated force: 15 daN - 3,000 daN
Length: 3 m

... high precision measurements, test benches, laboratory tests Usable with load rings or buttons for better performance. “S” load cells provide superior performance in compact ...

Rated force: 0 kN - 14 kN
Height: 3.5 mm

... measured acts on the piezoelectric force sensor via the preloaded or mounting structure and produces a charge that is directly proportional to the force. This is measured by an electrode integrated in ...

Rated force: 0 kN - 14 kN
Height: 3.5 mm

... measured acts on the piezoelectric force sensor via the preloaded or mounting structure and produces a charge that is directly proportional to the force. This is measured by an electrode integrated in ...

Rated force: 0 kN - 3.6 kN
Height: 3.5 mm

... is supplied uncalibrated. The force sensors must be calibrated in situ after mounting. The SlimLine set consists of four shear force sensors permanently attached to a ...

Rated load: 5 kg - 500 kg

... full load, a safe loading of 150% and an ultimate load of 300%. In addition to its compact footprint (typical across all eight capacities), PT8000 has a great range of mounting accessories ...

Rated load: 50 kg - 300 kg

Medium to high capacity versatile single point load cell. Suitable for most simple weighing scales in industrial use. The PTASP6-E is a small physical footprint in relation ...

Rated load: 50 kg - 300 kg

... class3 medium to high capacity versatile single point load cell. Suitable for most simple weighing scales in industrial use. The PTASP6-E3 is a small physical footprint ...

Rated load: 150,000 lb - 800,000 lb

... capacities Load Cell Type: Stainless steel SCA series compression load cells Load Cell Cable: 50 ft / 15 m Stand Type: Self-checking, ...

Rated force: 5 N - 100,000 N

Universal load cells combining accuracy, sturdiness and easy installation o Material: - 2710: stainless steel - 2715: alloy steel o Protection class: IP67 o Compact design o ...

Rated force: 0 N
Rated load: 0 kg

High-accuracy universal load cells, easy to install. o Wide range of capacities: from 100 N to 10 kN o Overload protection in tension and compression (only for 2712-A and 2712-C) o ...

Rated force: 10 kN - 50,000 kN

TENSION AND COMPRESSION LOAD CELLS (VERY HIGH CAPACITIES) Reference : 5100-5105 Accuracy universal load cells, easy to install. - Wide range ...

Rated load: 25 lb - 500 lb
Length: 2.81 in

... Netweighing The 60040 is a compact, low capacity, alloy-steel, highprecision bending-beam load cell. This product’s small size and accuracy makes it ideal for applications that demand ...

Rated load: 10 kg - 200 kg
Length: 150 mm
Height: 39 mm

... wire in load cell cable Applications • Platform scales • Bench scales • Counting scales • Grocery scales Model 1142 is a stainless steel single-point load cell ...

Rated load: 0.2 t - 100 t
Height: 34.8, 41.1 mm

• Compact size with low profile • Low deflection for high output • Electroless nickel-plated alloy tool steel construction • Off center load compensated • OIML C3 available for whole series ...

Rated load: 2 t - 1,000 t

... conditions. • Capacities from 2Te to 1000Te as standard. • Cells designed to exactly suit your application. • Robust, Compact, Stainless Steel design. • Accurate to better than 1% • Proof Load ...

Rated load: 12 t - 1,000 t
Height: 201 mm - 1,336 mm

• For compact, reliable and precise tensile load monitoring for your lifting, pulling or weighing applications. • Suitable for all industry sectors including Marine, Offshore and Subsea. • 14 Load ...

SSQ Analog is a rugged and high-performance wire cable pull transducer with analog output designed for industrial applications and are therefore particularly high-quality and durable. Excellent repeatability, high ...

Rated force: 33 N - 25,000 N

•Measuring range 100:1, accuracy class ±0.3% •11 sizes with nominal force from 33 to 25000 N (7.5 to 5620 lbf.) •Overload protection up to 20-times nominal force, full stainless steel The force measuring bearings of the LMGZ-Series, ...

Rated force: 50 N - 2,000 N

•Compact dimensions and various installation options •Nominal force ratings from 50 to 1000 N ( 11 to 220 lbf.) •Options include high temperature and vacuum chamber (to 10-7 hPa) construction •Measuring range 30:1, ...

Rated force: 1,000, 250, 500, 50, 125 N

... . The compact dimensions and the simple installation with only one screw allow new assembly options in machines with tight installation space. •Compact dimensions, simple installation •Precise results, ...

Rated force: 44 N - 1,779 N

The VNW transducer combines the robust and versatile design of DFE's time-proven Model C shaft-end transducers with a choice of mounting styles and wheel options from the RFA -style cantilevered transducers. DFE has kept the quality of ...

Rated load: 50 g - 2,000 g

Tension Transducers Capabilities • Two mounting styles: threaded bolt or stackable • Special wheels are available • Loading ratings from 50g to 2000g (2 oz. to 4.4 lbs.) Typically used in filament winding, fiber processing and materials' ...

Rated load: 2,500 lb - 100,000 lb

Compression-Only load cell Hermetically sealed cell Performance to .05% Compact size High 4 mV/V output Eccentric load compensated ...

Rated force: 10,000 N - 20,000 N

Capacities: Force (kN) / Torque (Nm) - 10/10, 20/20 Compact design Bottom cable exit The AT103 is an axial torsion transducer for measuring both torque and force in a single sensor. Typical applications include rheometry ...

Rated force: 222.4, 889.6 N
Rated load: 20.44, 90.72 kg
Length: 2 in

... Multi-Component Bi-Axial Load Arm offers an excellent solution for measuring Fx and Fy Loads. The MBA400 is made from robust 17-4 Stainless Steel, weighs only 16 oz, and offers a compact ...