100~120VAC or 200~220VAC Single Phase Power Input
Ideal driver for ...
Star Bipolar, Constant Current Chopper Driver, 5-Phase System which offers Servo-like Performance
Highly Economical
110VAC ± 10% Power Requirement.
3.5 Amps Power Consumption.
Auto-Current cutback at motor standstill. Output Current ...
Constant current type, maximum 1.4A/phase
Motor current shut off signal.
Auto current down function.
8 ...
Modules Stepper
If you are looking for the flexibility of designing in our motion ICs but lack ...
TMCM-612/SG
Description
6-axis controller/driver 1.1A/24V + data aquisition
The TMCM-612/SG is a six axis 2-phase stepper motor controller and driver module with a high performance data acquisition part. The integrated 8 channel 16 bit ADC converter can be programmed to do a step-synchronous input voltage scan and store values at a high ...
PANdrive PD-140-42-SE
Description
42mm stepper motor with integrated controller/driver and sensOstepTM encoder
The PD-140-42-SE PANdrive is a full mechatronic solution including a 42mm flange high torque motor, a motion controller/driver and a integrated sensOstep™ encoder. The PD-140-42-SE can be controlled via RS232, RS485, CAN or USB interface. ...
The DS Series is a compact driver for New Pentagon (Bipolar) stepping motors, 0.36° or 0.72° per step. DS Series driver contains ...
The AlphaStep with Built-in Controller offers closed loop control and high response moves with no hunting or gain tuning and features low vibration at low speeds. Using Oriental Motor's closed loop control, the AlphaStep with Built-in Controller ...
The RK Series incorporates new functions and state-of-the-art technologies to achieve the ultimate performance of a stepping motor. The series ...
PicoSTP is a simple, user-friendly and flexible stepper motor driver suitable for medium and low power, applications.
PicoSTP is the right choice for all applications where the small dimensions and best cost/performances ratio are important. ...
The STP-170 module is suitable for high-performance and low-cost bipolar motor stepper driving. This driver can operate from 12 to 42Vdc with a nominal current of 1.7A A wide series of accessories ...
The STP250 module is suitable for high-performance and low-cost bipolar motor stepper driving. This driver can operate from 12 to 42Vdc ith a nominal current of 2.5A.
A wide series of accessories ...
3-phase stepper drives ...
The SW with c0300 and c0400 firmware is a series of Full Digital drives configurable by means of PC software interfaces and easy to install in CANBus fieldbus networks (CANopen protocol) or in RS232/RS422 serial systems (Modbus protocol). Additionally to ...
The SW with c0390, c1390, c0490 and c1490 firmware is a series of Full Digital drives programmable by means of IDE eePLC (Integrated Development Environment) and can also function in 'standalone' mode' allowing a maximal application customization. The series with c1390 and c1490 firmware integrates also ...
The SDL drive series are Full Digital high performance micro-step devices based on the precise pwm control technology to regulate the sinusoidal current. Thanks to this solution the SDL drives are able to control stepper ...
* 3.0 Amp unipolar drive
* Bi-directional ramping between speeds
* ...
Features
• Single 8V - 35V input supply voltage range
• 0.0 to 1.5A adj phase current (ships ...
Features
• Integral controller - driver - power supply
• Output current of 4 amps @ 40Vdc
• Short circuit/over temp. ...
The smart microstepping drives of the DS30 series are the right choice for all those applications which need an accurate motor control both in speed and position.
The built-in indexer is fully programmable by the user through easy and intuitive functional ...
High reliability and performance, compact size and low cost have been the guidelines followed to develop the drivers of DSxxx series suitable for DIN rail mounting.
Using the last electronic components generation and the SMT technology ...
The OS10xx series offers an excellent price-performance ratio.
Realized in open design they have a IP00 protection grade.
The drivers are mountable through 4 holes placed ...
The smallest stepper motor driver on the market. Only 1.25"x1.25" (32mm x 32mm).
Up to 750mA and 24V.
Product Description
The BSD-01C module is a complete Full step driver with ...
Microstepping Driver - 1/8-step resolution.
up to 750mA /phase (version dependent), 30VDC
dimensions: (2.00" x 2.50" x 0.55")
(51mm x 64mm x 14mm)
Product ...
Microstepping Driver - 1/16-step resolution.
2.5A /phase, 30VDC
dimensions: (2.75" x 2.70" x 0.88")
(70mm x 69mm x 22mm)
Product Description
Microstepping driver with 1/16-step ...
The ST stepper drives are a family of compact digital stepper drives with multiple control options and many sophisticated features. The ST drives represent the latest generation of stepper drive technology from Applied Motion. Step motors run smoother than ever with features such as anti-resonance, ...
The STAC6 series stepper drives are powerful, two-phase, bipolar step motor drives for high-speed, high-torque applications. With high bus voltage and high current output, STAC6 drives provide even the largest step motors with enough power to get the job done.
STAC6 stepper drives employ sophisticated ...
The STAC5 series stepper drives are powerful, two-phase, bipolar step motor drives for high-speed, high-torque applications. With high bus voltage and high current output, STAC5 drives provide even the largest step motors with enough power to get the job done.
STAC5 ...
The 17 DRV 001 QuickInstall stepper-motor drive is one of a series of precision actuators which are easy to install and remove without tools. A captive retaining ring and a precision mounting surface ...
The benchtop piezoelectric controller incorporates the latest high-speed digital signal processing technology and low-noise analog electronics to provide high-voltage (0-75 V) output.
The 17 BPC controllers are designed for use in critical alignment applications where ...
BSC - USB Stepper-Motor Controllers
* Optically isolated input/output
* Dynamic step-resolution control
* Includes software with ActiveX® programmable interface
* Bipolar synchronous control
This ...
SLA7024M, SLA7026M, and SMA7029M
High-Current PWM, Unipolar Stepper Motor Controller/Drivers
Features
* Cost-Effective, Multi-Chip Solution
* 'Turn-Key' Motion-Control Module
* Motor Operation to 3 A and 46 V
* 3rd Generation High-Voltage FETs
* 100 V, Avalanche-Rated NMOS
* Low rDS(on) NMOS Outputs
* Advanced, ...
The A1442 is a full-bridge motor driver designed to drive low-voltage, brushless dc motors. Commutation of the motor is achieved by use of a single Hall element sensor to detect the rotational position of an alternating-pole ring magnet. A high-density CMOS semiconductor process ...
The A3930 and A3931 are 3-phase brushless dc (BLDC) motor controllers for use with N-channel external power MOSFETs. They incorporate much of the circuitry required to design a cost effective three-phase motor drive system, and have been ...
