Paddle-wheel flow-meters

 
170 Industrial products | 62 Companies
 
 
Hoffer Flow Controls
Digital paddle-wheel flow-meter  max. 260 gpm, max. 2 500 psi | TriFlo Hoffer Flow Controls

TRIIFLO
LIIQUIID FLOW LOGGER:

The Hoffer TriFlo System provides both
system integrators and operators with the
most flexible measurement solutions for
liquid flow including produced water flow
and hydrocarbon condensate flow
measurement. ...

Bi-directional turbine flow-meter Hoffer Flow Controls

Available Temperature Range: -400°F to +350°F
continuous (to +400°F intermittent heat).
End Fittings: MS flared and flanged styles are
recommended. ...

High pressure turbine flow-meter  max 10 000 psi, max. 1041 l/min | HHp series Hoffer Flow Controls

Low cost.
· Outstanding accuracy.
· Provides wide flow ranges (10:1 to 100:1 turndown ranges available).
· One piece 316/316L S/S Construction ...

Seametrics Inc.
Plastic paddle-wheel flow-meter  0.27 - 150 l/min | SP series Seametrics Inc.

These versatile impeller flowmeters are availalble in 3/8", 1/2", 3/4", and 1" nominal pipe sizes with female NPT threads (SAE optional). They employ jewel bearings to allow for very low minimum flow rates and superior life.

With a body material of polypropylene, the SPX is an economical choice for metering ...

Stainless steel paddle-wheel flow-meter  0.38 - 95 l/min | SES Seametrics Inc.

The SES single-jet meter provides accurate, wide range flow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high quality jewel bearings results in long life and relatively high tolerance ...

Stainless steel Pelton wheel turbine flow-meter  max. 3 000 gl/min | WTS Seametrics Inc.

This unique system of 2" to 8" turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating fluids. The entire rotor assembly can be easily removed for field service without ...

Georg Fischer - Piping Systems
Paddle-wheel flow-meter  DN 15 - 900, max. 6 m/s | 515 series Georg Fischer - Piping Systems

* Flow rate range 0.3 to 6 m/s (1 to 20 ft/s)
* Wide Turndown Ratio of 20:1
...

Paddle-wheel flow-meter  DN 15 - 200, 0.1 m/s | 2537 series Georg Fischer - Piping Systems

The Signet 2537 Flow Sensor is the next generation in fluid measurement technology from the inventor of the original paddlewheel flowmeter. This sensor is an enhancement on what's already an industry standard. ...

Stainless steel paddle-wheel flow-meter  max. 900 mm, max. 6 m/s | 2540 series Georg Fischer - Piping Systems

* Flow rate range 0.1 to 6 m/s (0.3 to 20 ft/s)
* Replaceable electronics
...

BURKERT FLUID CONTROL SYSTEMS
Paddle-wheel flow-meter  DN 6 - 65 | 8036 series BURKERT FLUID CONTROL SYSTEMS

• DN06 to DN65 fluidic process connection
• Programmable outputs ...

Insertion paddle wheel flow sensor  DN 15 - 400, max. 10 bar | 8026 series BURKERT FLUID CONTROL SYSTEMS

The Bürkert transmitter Type 8026 is a compact
device, specially designed for measuring the flow
rate in solid-free liquids, ...

Aalborg Instruments
Digital paddle-wheel flow-meter  RS-232, RS-485 | PWE Aalborg Instruments

Aalborg®'s multi-parameter PWE Digital Paddle Wheel Flow Meters offer cost-effective solutions to medium flow liquid applications. Password-protected access to process parameters eliminates user-tampering or resetting. Flow rates can be displayed in 23 different volumetric or mass flow engineering units. Flow meter parameters & functions can be programmed locally via optional key pad & LCD ...

Paddle-wheel flow-meter  max. 10 bar, ± 1% FS l PWM Aalborg Instruments

PWM paddlewheel meter for liquid flow measurement.

Design Features

- Flow meters for liquid flow applications
- Jewel bearings allow for very low minimum flow rates
- Easy to install and operate
- ...

BLUE-WHITE
Digital paddle-wheel flow-meter  F-2000 series BLUE-WHITE

The Model FH is the base unit of the BW DIGI-METER series. The Model FH is a paddlewheel type insertion flow sensor. It applies precise digital technology to monitor flow rates from 1.0 to 20 feet per second. The signal can travel up to one mile without a booster and, the unit will interface ...

Digital paddle-wheel flow-meter  F-1000 series BLUE-WHITE

Blue-White's F-1000 Series meters provide the performance and features of electronic
meters, without ...

GEMS SENSORS & CONTROLS
Turbine flow sensor  max. 172.4 bar | FT-110 Series GEMS SENSORS & CONTROLS

FT-110 Series
TurboFlow® Economical Flow-Rate Sensors
FT-110 Series ...

Val.co
Paddle-wheel flow-meter  max. 100 l/min, IP67 | METER RR Val.co

METER RR FLOW METER

GENERAL CHARACTERISTICS
The sensor consists of a rotor vane that is rotated by the speed of the
flowing medium. The speed of rotation ...

Stainless steel Pelton wheel turbine flow-meter  max. 68 m3/h | METER RT Val.co

METER RT FLOW METER

GENERAL CHARACTERISTICS
In a full stainless steel enclosure a stainless steel turbine, ...

FLUX
Digital paddle-wheel flow-meter  5 - 50 l/min | FMT series FLUX

interlocked wheel impeller in the measuring chamber
Flowrate 5-50 l/min
Viscosity max. 40 mPas (cP)
Operating pressure ...

Golden Mountain Enterprise
Paddle-wheel flow-meter  max. 10 Kg/cm2 | HF100 Golden Mountain Enterprise

● Connecting size: 3/8", 1/2", 3/4", 1" NPT female standard
● Power Supply: ...

LITRE METER
High flow rate Pelton wheel turbine flow-meter  1 - 500 l/min, 30 - 345 bar, -20 - 135 °C | MM Series LITRE METER

Designed for use with medium pressure and temperature applications. Pelton Wheel flowmeter with 316 stainless steel body, providing a pulse output.
Flow range : 1 to 65 l/min up to 10 to 500 l/min and higher.
Liquids : Any non abrasive, chemical compatible low viscosity ...

High pressure Pelton wheel turbine flow-meter  0.004 - 33 l/min, 690 bar, -50 - 135 °C | LM Du LITRE METER

Pelton Wheel flowmeter with high pressure Duplex stainless steel body, providing a pulse output.
Flow range :
0.004 to 0.06 l/min up to 0.1 ...

In-line Pelton wheel turbine flow-meter  0.006 - 65 l/min, 100 bar/230 bar, -20 - 100 °C | LMX series LITRE METER

Inline Pelton Wheel flowmeter with integral flow straighteners, providing a pulse output.
Flow range : 0.004 to 0.06 l/min up to 0.1 to 28 ...

Höntzsch
In-line vane-wheel flow-meter  max. 120 m/s Höntzsch

FAR·Di
for measuring volume flow/flow velocity for ± direction sensing

Special specifications
also available with integrated temperature probe Pt100 and / or built-in absolute pressure gauge


Types of FA·Di measuring tubes

- measuring tube inside diameter: 9.7 mm; 18.2 mm; 25 ...

Webtec Products Limited
Bi-directional turbine flow-meter  400 lpm (100 US gpm), 420 bar (6000 psi) | LT Series Webtec Products Limited

High accuracy turbine flow meters for use with hydraulic fluids. Flows up to 400 lpm (100 US gpm). Built-in ...

Bi-directional turbine flow-meter  15 lpm (4 US gpm), 420 bar (6000 psi) | LT15 Webtec Products Limited

High accuracy turbine flow meters for use with hydraulic fluids. Flows up to 15 lpm (4 US gpm). Built-in ...

Bi-directional turbine flow-meter with loading valve  400 lpm (100 US gpm), 420 bar (6000 psi) | LTR Series Webtec Products Limited

High accuracy turbine flow meters with built-in loading valve and thermistor, for use with hydraulic fluids. Flows up to 400 lpm ...

recherche-kwref www di En 2012-05-20-18