|
|
CLAMPMASTER SERIES
Clampmaster series of tools feature power packs ranging from SP-01P to
SP-003. These, combined with the special jaws can manipulate a wide variety of hose clamps (1/4" up to 3").
Our SM-300 and SM-350 are standard tools and fill 80% of all hose clamp needs.
A complete model listing and specially engineered tools are available from the factory.
|
|
8021 - Pneumatic Hold Down Clamp - Enclosed
Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.
1. 390 lb. Capacity
2. Double-acting pneumatic system required to operate
3. Available with magnetic ring for position sensing as an option. Switches are also available
4. Can be equipped with Viton seals for high temperature applications
035 - SELECT Pneumatic Swing/Pull Clamp
StrongHold SELECT pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. They are a rugged and simple design suitable for harsher applications.
1. Double acting in threaded body or lower flange mount styles
2. Range of sizes for maximum clamping forces from 50 to 430 lbs.
3. Swing motions in right, left or straight guided pull
4. Avaiable in 0, 45, 60 or 90 degrees of swing
|
|
The high performance toggle action clamps are used to clamp mid to large size vehicle parts in Body-in-White operations. The oblong design of the cylinder and the narrow clamp head allow optimal access for weld guns and the fully enclosed mechanics provide a shield from welding slag.
The units are designed for over 3 Million work cycles.
Optionally available in steel or aluminum design.
Integrated inductive position sensors mounted in a cartridge (Patented)
|
|
Linear Pneumatic clamping cylinder, cylinder or combi-tensioning swivel clamp cylinder
linear or swivel the clamping unit with compressed air
Self-locking clamping 9000N
32mm clamping away (10mm in swing clamp)
Overload protection
Swivel angle max. 120 ° adjustable
Various mounting options
|
|
Twist Clamp Cylinders
Combines linear and 90-degree rotary motion with an internal pin/cam mechanism.
Rotary action moves a clamping arm away from the workpiece, allowing for easy loading and unloading of parts.
|
|
Nexen's RBR-series rail brakes are ideal for clamping and power-off holding applications. The unique piston design allows high clamping forces and low release pressures.
The RBR is engineered for dependable performance, easy set up and low maintenance.
|
|
Active without pressure:
The Clamping and Braking Element including spring-loaded energy storage MB
The MB series is based on a dual-effective wedge slide gear with spring-loaded energy storage for clamping and braking without pressure.
As a specific feature it has three pistons connected in a line.
This arrangement allows use of a stronger spring at 4.5 bar than the BW series does. The stronger spring-loaded storage permits holding forces up to 3,800 N.
The MB series is designed for braking on linear guides.
Because of the material combination of the linear guide/contact section,the linear guide won't be damaged by the contact section.
|
|
Active without pressure – flat design:
The Clamping Element for torque take-up with spring-loaded energy storage TP
The TP series is a pneumatic clamping element for torque motors or for rotational axes.
It works with a newly developed spring-loaded energy storage system.
Torque take-up occurs inside the TP which excludes wear on the driven shaft.
TP achieves high holding torques at a pneumatic opening pressure of >4 bar.
Due to high rigidity, positioning accuracy is exact in use.
The zero maintenance TP is suitable for shaft diameters of
Ø50 to Ø320 mm.
It is characterised by easy assembly and a flat design.
|
|
|
|
|
|
Active without pressure - compact and powerful:
The Clamping and Braking Element with spring-loaded energy storage UB.
The UB series combines the technology of our BW, TK and MB series. The rigid housing and central position of the wedge slide gear achieve very high supporting forces. The mounting hole template enables the BW, TK and MB series to be substituted. The UB series is based on a dual-effective wedge slide gear with spring-loaded energy storage for clamping and braking without pressure.
This arrangement of three pistons connected in a line allows use of a stronger spring at 5.5bar.
The stronger spring-loaded storage permits holding forces up to 9,000 N. Positive fit contact sections mounted within a strong casing guarantee high axial and horizontal rigidity.
The UB series is designed for braking on linear guides. Because of the material combination of the linear guide/contact section, the linear guide won't be damaged by the contact section.
In order to exclude damage from contamination with chips (chips between contact section and linear guide), the elements can be fitted with original seals (seal kit) from the respective linear guide manufacturer and longitudinal seals as accessories.
When used in harsh work environments or with cooling liquid, the seal kit should be used as well.
|
|
The clamping elements react in the shortest possible response time by the patented pneumatic pre-loading of the system of the spring plates in the diaphragm.
These safety systems are permanently operational for the maximum machine protection.
|
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices
|
|
| ... products without technical information |
| |
Twist Clamp Cylinders
Combines linear and 90-degree rotary motion with an internal pin/cam mechanism.
Rotary action moves a clamping arm away from the workpiece, allowing for easy loading and unloading of parts.
|
|
|
|
|
|
Logansport Pneumatic Cylinders
Ideal for horizontal or vertical applications. Eliminates many parts associated with closed center rotary inlets.
Features Include:
- Simple Inlet Design
- Constant Air Flow
- Up to 7,000 RPM Capability
- Standard Built in Trapping
- Optional Trip Rod and Thru Port
Inlet Assemblies:
The inlet assembly, sometimes called the distributer, can be designed in two ways. It can have a fixed position in relation to the piston housing, or it can float with the stroke of the cylinder (a "reciprocating" inlet).
Inlet Options:
Third port for air or coolant thru (view schematic)
Solid Trip Rod, which will sense cylinder position. Adjustable proximity switch holders (view schematic)
Thru hole trip rod for air or coolant thru. Will sense cylinder position utilizing adjustable proximity switch holders. (view schematic)
Trapping
This safety feature allows the cylinder to remain pressurized, and the chuck to maintain clamping pressure, in the event of a power loss.
Viton Seals
The seals keep compressed air or hydraulic fluid captured within the cylinder. The seals are designed to allow movement and support between internal components
Piston
Cylinders can be designed with a signle piston, two pistons connected in one housing (tandem), an open center piston (thru-hole), or with two different size pistons, in seperate housings, which can be energized independently (duplex)
|
|
| ... products without technical information |
| |
Nexen's RBR-series rail brakes are ideal for clamping and power-off holding applications. The unique piston design allows high clamping forces and low release pressures.
The RBR is engineered for dependable performance, easy set up and low maintenance.
|
|
Active without pressure:
The Clamping and Braking Element including spring-loaded energy storage MB
The MB series is based on a dual-effective wedge slide gear with spring-loaded energy storage for clamping and braking without pressure.
As a specific feature it has three pistons connected in a line.
This arrangement allows use of a stronger spring at 4.5 bar than the BW series does. The stronger spring-loaded storage permits holding forces up to 3,800 N.
The MB series is designed for braking on linear guides.
Because of the material combination of the linear guide/contact section,the linear guide won't be damaged by the contact section.
|
|
Active without pressure – flat design:
The Clamping Element for torque take-up with spring-loaded energy storage TP
The TP series is a pneumatic clamping element for torque motors or for rotational axes.
It works with a newly developed spring-loaded energy storage system.
Torque take-up occurs inside the TP which excludes wear on the driven shaft.
TP achieves high holding torques at a pneumatic opening pressure of >4 bar.
Due to high rigidity, positioning accuracy is exact in use.
The zero maintenance TP is suitable for shaft diameters of
Ø50 to Ø320 mm.
It is characterised by easy assembly and a flat design.
|
|
|
|
|
|
Active without pressure - compact and powerful:
The Clamping and Braking Element with spring-loaded energy storage UB.
The UB series combines the technology of our BW, TK and MB series. The rigid housing and central position of the wedge slide gear achieve very high supporting forces. The mounting hole template enables the BW, TK and MB series to be substituted. The UB series is based on a dual-effective wedge slide gear with spring-loaded energy storage for clamping and braking without pressure.
This arrangement of three pistons connected in a line allows use of a stronger spring at 5.5bar.
The stronger spring-loaded storage permits holding forces up to 9,000 N. Positive fit contact sections mounted within a strong casing guarantee high axial and horizontal rigidity.
The UB series is designed for braking on linear guides. Because of the material combination of the linear guide/contact section, the linear guide won't be damaged by the contact section.
In order to exclude damage from contamination with chips (chips between contact section and linear guide), the elements can be fitted with original seals (seal kit) from the respective linear guide manufacturer and longitudinal seals as accessories.
When used in harsh work environments or with cooling liquid, the seal kit should be used as well.
|
|
The clamping elements react in the shortest possible response time by the patented pneumatic pre-loading of the system of the spring plates in the diaphragm.
These safety systems are permanently operational for the maximum machine protection.
|
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices
|
|
|
constant tension hose clamp, responds to temperature and pressure changes, low profile and high performance
|
|
|
|
