|
|
Coilhose Pneumatics offers the following coiled pneumatic hose types:
Nylon Air Hose
StowAway Heavy Duty Nylon Air Hose
SlimCoil Nylon Air Hose
Twin Bonded Nylon Air Hose
Nylon Hose Fittings
Flexcoil Polyurethane Air Hose
Flexcoil Assemblies with Quick Disconnects
CUB Coil Polyurethane Air Hose
Flexeel Polyurethane Reinforced Coiled Air Hose
|
|
Recoil Airline Coils
* Pre-coiled seamless Nylon (PA) 12, supplied with factory fitted 360° swivel male couplings, complete with spring guards.
* Stock sizes from 8mm to 12mm OD in 2.5m 5m & 10m working lengths
* Easily Installed
* Lightweight
* Spring Guards
* Highly Flexible
Technical Information
* Temperatures: -35°C to +70°C. Occasional use up to 120°C. Brittle point: -70°C. *
* Lightweight
* Highly flexible
* Easily installed to suit a variety of horizontal or vertical applications
* All the benefits of Colex Nylon tubing in a handy re-coil format
* Resistant to moisture absorption
* Provides consistent flexing over a wide operating temperature range and humidity conditions
* Spring guards are fitted to both ends of the tube to prevent kinking and a choice of 1/4″ and 3/8″ BSP end fittings are available from stock
|
|
|
|
|
|
Family of polyurethane (PUR) hose styles up to 232 PSI (16 bar) that are lightweight and extremely flexible for specific application requirements. CEJN PUR hose offers excellent recoil ability, making it a perfect mate for small and lightweight pneumatic tools. Outlasting conventional PVC hose up to 10 times, the hose also offers
- Excellent resistance to oils, solvents, and other non-aqueous solutions
- Abrasion resistance and excellent tensile, tear, and impact strength
- Long service life with outstanding aging qualities
Styles in CEJN’s PUR hose family include:
Braided
- Straight hose: Easily springs back to original form, excellent choice for applications requiring a maximum working pressure up to 232 PSI (16 bar)
Non-braided
- Straight hose: Suitable for use with push-to-connect fittings, excellent choice for applications requiring a maximum working pressure up to 145 PSI (10 bar)
- Spiral hose: Excellent crimp resistance
- Spiral anti-spark hose: Spark and scorch resistant
Straight braided
- Electrically conductive hose: Dissipates electro-static discharge
- Anti-spark hose: Spark and scorch resistant
- Water hose: Excellent choice for compressed air in damp and wet environments
|
|
|
|
|
|
Flexeel Reinforced Polyurethane Straight Hose:
Flexeel Polyurethane Hose offers an excellent alternative to much bulkier rubber and plastic hoses. Extremely lightweight and tough, it is ideal for either outdoor contractor use or indoor industrial use. Flexeel retains its flexibility even in cold envionments. The reinforced construction eliminates the possibility of having various layers separate due to the constant expansion and contraction during pulsating operations, such as with staple or nail guns. Flexeel is available with reusable, reusuable strain relief, or quick disconnect fittings. Flexeel is also compatible with our Polyurethane reusable fittings for in-the-field replacements.
In addition to Flexeel, we also offer the following straight air hose catergories:
Water Flexeel Industrial Polyurethane Hose
FlexReel — The Best Way to Store and Transport Flexeel
Nitrile Blend Hose
General Purpose Hose
Thermoplastic Hose
Lock-On Rubber Hose
Lock-On Rubber Hose Fittings
Ball Swivel Lead-In Hose
Pigtail Assemblies
Manifold Coupler Whip Hose Assembly
Brass Hose Fittings
Hose Crimpers
Hose Ferrules
Clamps, Installation & Removal Tools
|
|
Pneumatic Polyurethane Tubing
* 100% ester based polyurethane
* Stock sizes from 4mm to 12mm OD
* Choice of Colours
* Lightweight & Flexible
* No Plasticizers
* Minimum Kink Memory
|
|
The tight diameter of our Mini-Coils make them extremely flexible and ideal for use with robotics, instrumentation, small pneumatic tools, control circuits or any other application requiring either constant or intermittent motion. They are available in Nylon (higher pressure rating and heat resistance) or Polyurethane (more flexibility) and include a pigtail on each end for easy fitting installation or connection to other devices.
- Recommended working length is 85% of the total length.
|
|
|
|
|
|
Pneumatic tubes made of polyethylene
Pneumatic tubes made of polyamide
Pneumatic tubes made of polyurethane
Pneumatic tubes made of FEP
Pneumatic tubes made of polyethylene/aluminium
Pneumatic tubes made of other plastic materials
High-performance hose lines
We manufacture ready-to-fit hose lines for pressures for more than 600 bar and for all media, hoses made from rubber, plastics and metal for applications in industry, construction and business.
Pneumatic pipes and air hoses
Our range of plastic pipes with calibrated external diameters for pneumatic applications is supplemented by quick connection systems and functional fittings. We can also supply just the right hoses for ventilation and extraction tasks.
Suction and pressure hoses
We can satisfy an extremely wide range of requirements with a broad selection of suction, pressure, construction, conveyor and water hoses.
Fittings
Press-on fittings and jointing systems are available, as well as ball cocks for all pressure levels, diaphragm valves and non-drip quick connection couplings.
Expansion joints
Expansion joints made from rubber, PTFE, metal and textile materials are used for coping with expansion and vibration and also to provide insulation against solidborne noise in pipelines.
|
|
Compressed air applications
MAXAIR
For pneumatic tools and general purpose compressed air hose in industrial and other applications.
Suitable for compressed air in all applications, oxygen (ID ≤ 25 mm only), and inert gases for arc welding: argon, nitrogen, and carbon dioxide.
Also for other media (under certain conditions) such as industrial water, aqueous solutions or emulsions for horticultural spraying, white washing, disinfection, acids and alkalis.
From 5 to 100 mm.
|
|
To carry out any geometry of pneumatic network, final or temporary Atlas Copco proposes Airnet piping to you: 6 diameters of aluminum tubes and a panoply supplements connections and accessories.
Insensitive with corrosion, the Airnet system preserves the quality of the air up to the point of use and offers a major asset in the control of escapes and the pressure losses énergivores. Very smooth, the internal surface of the tubes supports the flow of the fluid, minimizing of as much the energy request. The Airnet modules are guaranteed 10 years and in conformity with the directive the DEVELOPING COUNTRIES 97/23/EC. Their blue coating of standardized color makes them easily identifiable.
Diameters: from 20 to 80 mm (3/4 inch with 3 inches)
Temperatures: of -20 C with +70°C
Maximum operating pressure: 13 bars
|
|
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
| ... products without technical information |
| |
Plastic Tubing
(pictured) Multi-Color Ribbon Tubing
Multi-Color Ribbon Tubing commonly known as MCR, is a cost effective method of routing two of more tubing lines. Made from 95 durometer Polyurethane, MCR can be installed faster than other jacketing options. MCR color codes tubing for indentification, tracing, or troubleshooting. MCR with withstand the rigors of flexing, yet be easily separated for routing.
Other types of Plastic Tubing that Coilhose Pneumatic offers:
Polyurethane Tubing
Nylon Tubing
Polyurethane Tubing
Polyvinyl (PVC) Tubing
Spark-Lin Weld Spatter Resistant Tubing
D.O.T. Air Brake Tubing
Tubing Cutter
Hose Cutter
Tube Channels
|
|
... see all the products in the category
Hoses
|
Wide choice of automatic push-in fittings.
Four different lines available:
50000 serie is made in brass - metric thread
57000 serie is made in brass - metric thread with metal collet.
87-88000 serie is made in brass - NPT-NPTF thread
55000 serie in technopolymery.
60000 line in stainless steel.
All three lines offers multiple combination of sizes, figures and threads.
Main advantage is the gripper which allows a perfect clamping on all kind of tubes.
Almost 1000 different items ready in stock for prompt delivery.
Suitable for all kind of vacuum or compressed air connection
Fittings are available in the following sizes:
tube from 3 up to 14;
US tube from 1/8" - 1/2"
thread of M5 up to 1/2"
|
|
POLYMER PUSH FITTINGS CNP
New-generation polymer design : lightweight, small-sized, rugged, and easy to fit.
Broad range with a large selection of shapes, threads and diameters.
Smaller: polymer design and short tapered or parallel threads with seals.
PUSH FITTINGS METAL CNM
Nickel-plated brass design to resist impacts and the toughest conditions.
Straight screw machined couplings, brass elbows and tee pieces.
Precision machined.
PUSH FITTINGS INOX CNX
Stainless steel design : suitable for aggressive environments and food processing.
Swivelling parallel elbows and tee pieces.
|
|
|
Parker's industrial quick couplings represent the broadest range of quick couplings for most media. Dry-break and non-spill quick couplings contamination free for safety and protection of environment.
|
|
Georg Fischer manufactures high quality electric and pneumatic actuators for plastic butterfly and ball valves. They are proven in many applications all over the world.
|
|
ALL STAINLESS STEEL
ALL PNEUMATIC
EASILY MAINTAINABLE
LIGHTWEIGHT and COMPACT
EASY TO MANOEUVRE
HIGHLY AFFORDABLE
DRY ICE BLASTING UNIT
|
|
Mini-Jet Basic
The universal
- small and compact
- easy to use
- high performance
- low pellet and compressed air consumption
- Scrambler (Dry Ice Mill) for gentle cleaning of delicate
parts /optional
- simple activation of the Scrambler /optional
Standard equipment:
- basic and functional equipment
- blast pressure and pellet control
- gauge for dry ice consumption
- compressed air treatment
- digital blast time recording
- empty control
- vibrator interval function
- automatic ground roll
- SX Micro Plus blast gun with power control
- G6 compressed air nozzle / RD 290 POM SX #7 nozzle
- blast hose package 7 meter with PVC sleeve
|
|
Penguin Dry Ice Specialties Inc. has now not only revolutionized the two hose ventury dry ice blasting machine, making the Mighty dr-i-cer Jr. one of the leading competitors in the dry ice blasting market.
We have now moved the bar even higher, ask about and allow us to introduce our new The Grand Penguin one hose blasting machine.
Keeping our policy of simplicity, aggression, and low costs. We have built an incredible dry ice blasting machine, in some cases doubling the cleaning power of dry ice. The Grand Penguin is the blaster that will deliver the best value with top shelf performance. Which means high aggression, low maintenance and competitive pricing.
|
|
PowerPTX Dry Ice Blasting Machine
Description
This single-hose low pressure, pneumatic blasting system using dry ice pellets, is a powerful and economical choice for blasting away unwanted contaminants.
Unique Features:
- Single-hose high performing system
- Pneumatic
- Fully adjustable ice feed rate
- Adjustable blast pressures from 50 to 125 psi (3.4 to 8.6 bar)
- Separator/filter provides added protection od pneumatic controls and ensures clean blast air.
- The dry ice blasting system includes one length each of low-pressure dry ice blast and air hose, and customer-specified dry ice blasting applicator and nozzle.
|
|
PowerPT Dry Ice Blasting Machine
Description
This dual-hose low pressure, pneumatic blasting system using dry ice pellets, is a powerful and economical choice for blasting away unwanted contaminants.
Unique Features:
- Dual-hose high performing system
- Pneumatic
- Fully adjustable ice feed rate
- Separator/filter provides added protection of pneumatic controls and ensures clean blast air
- The dry ice blasting system includes one length each of low-pressure dry ice blast and air hose, and customer-specified dry ice blasting applicator and nozzle
|
|
|
The Little Penguin is compacted and light weight and able to do most of the jobs its bigger brothers can do. The Little Penguin one hose dry ice blasting machine is designed with a new revolutionary concept. Small, portable, affordable, and one tough machine to beat.
|
|
| ... products without technical information |
| |
Tubes and bends in pneumatic conveying lines are suffering more or less abrasion. Gericke elbow type GB resists abrasion and avoids product attrition.
It reduces considerabley degradation of conveyed material and avoids formation of angel hair through its patented deflection chamber.
The compact design reduces cost of pipe support and installation. It is automatically self-purging. Little pressure drop.Free trial units available.
|
|
Features:
- Compact and easy to install
- 100% self cleaning
- Fits all flange and pipe connections
- Available in cast iron, stainless and aluminum
- Reduces noise level
- Minimized pressure drop
Applications:
- For all high and low density dilute phase systems
- For plastic pellets, other granules and abrasive products
- For retrofitting existing systems
- For replacement of long and short radius elbows - and other pipe bends
|
|
|
|
see the results for the following category : 
