|
|
Series 300 - Smaller than small!
- Smallest fully self-contained inductive proximity switches in the world.
- Ø3 mm and M4, housing length 22 mm, weight approx. 2 g (with 100 mm cable).
- Operating distance of 0.6 mm, or 1 mm (increased).
- Safe operation; all usual protection functions of larger devices are built in.
|
|
Reference: PS1 L 965 S
Sensing distance adjustable from 50 to 300 mm
Supply : 10 / 30 VDC
Outputs : PNP / NPN
Time-delay of output signal
High accuracy
Description
Emission by visible red light
Spot size by adjustable focus
Distance adjustment by precision screw
Direct and inverse function
Programmable timer to 40 ms max
Class 2 LASER
On / Off function
Applications :
Control of small parts on a production machine
Detection of compenents on a printed circuit
Presence control of crack in a part
Level control
Elimination of background
|
|
If you look for a sensor for position, passage, presence, level or speed, we must have it in our
range of magnetic sensors.
We can even design the ideal product for your applications !
At celduc® relais, we are eager to offer the best products for your application, thanks to our 30-
year experience in the key technologies that we use in our products :
- Reed switch, a dry contact in a sealed glass bulb providing insulation at the same time.
A simple, reliable and low cost solution.
- Electronic cell, based on either magneto-resistance or Hall effect, necessary for higher
performance, particularly in frequency .
|
|
elobau sensors are the first choice when it comes to robust explosion-proof switching elements. Proximity switches are available either as an intrinsically safe version with screened PVC cable or as an encapsulated version with optional potential terminal.
elobau ATEX switches are suitable for use as:
Intrinsically safe version
- Cat. 1 G (ia) for zone 0 (with screened PVC cable)
- Cat. 2 G (ia) for zone 1
Encapsulated version
- Cat. 1/2G (m) for zone 0/1
- Cat. 2 G (m) for zone 1
- Cat. 3 G (m) for zone 2
- Cat. 2 D for zone 21
- Cat. 3 D for zone 22
|
|
|
|
|
|
In various detecting devices with Bestact incorporated. and to mainlain high operation accuracy for a long period of time, sufficient investigation and consideration has been applied to the maierial sélection and design of the contact energizing magnet.
Permanent magnets used for Yaskawa's detecting devices are rare earth magnet and anisotropic ferrite magnet which are characterized by high coercive force and large energy product, thus optimum design has been achieved. Featuring excellent stable performance without demagneti-zation due to fluctuation in temperature.
Demagnetization due to aging is 2% or less tor a 10 year period.
Those magnet proximity sensors are typically used in : steel plant machinery and equipment (for raw material handling, iron making, rolling milIs), plating line, large-size material handling ma-chines, automobile manufacturing lines, elevators, cement and related equipment, power station facilities, dam equipment. pollution prevention equipment and devices. mine machinery, Chem-ical industry machinery and equipment. marine product processing machines.
|
|
|
Plant and mechanical engineers are responsible for ensuring personal safety. The machine safety products of elobau range from sensors and evaluation units for small machines to bus components for large plants. The personnel of elobau GmbH offers support with the implementation of the latest safety guidelines in particular the SIL accreditation.
|
|
|
|
|
|
Proximity switches with background suppression FT 20 RLH-PSM4
Scanning distance adjustable from 20 to 60 mm
Laser red light 650 nm
Detection of ultra small parts
Laser protection class 1
Contamination indicator
Teach-in/key lock by push of a button/control line
N.O./N.C. selectable
Also available with 3-pin connector
Switching frequency: 1000 Hz
Different object colours and surfaces can heavily effect the detection behaviour of an energetic switch. With purely energetic evaluation, it is, for example, not possible to detect a black object in front of a white background.The white background reflects more light than the object itself.
In order to deal with such applications reliably, the background suppression procedure was developed. In this procedure, both the light reflected by the background and by the object is evaluated.The light is captured by two different receiver elements. With this procedure, it is possible to reliably detect e.g. a dark object on a light color conveyor belt.
There are two different procedures for the physical realisation of background suppression. In general, a distinction is made between a fixed and adjustable background suppression. With a fixed background suppression, the transmitter and receiver elements are rigidly mounted.
The laser units are particularly suitable for the detection of very small objects. With larger objects, a red-light or infrared sensor should be used. Only the background suppression procedure enables the detection of a dark object on a light conveyor belt.
|
|
|
The Bently NevadaTM 3300 XL 50mm transducer system is a highly robust and reliable proximity probe system. It offers greater moisture resistance and a broader temperature range than older systems, without compromising the linearity and accuracy required by demanding applications such as DE.
|
|
|
|
|
|
In various detecting devices with Bestact incorporated. and to mainlain high operation accuracy for a long period of time, sufficient investigation and consideration has been applied to the maierial sélection and design of the contact energizing magnet.
Permanent magnets used for Yaskawa's detecting devices are rare earth magnet and anisotropic ferrite magnet which are characterized by high coercive force and large energy product, thus optimum design has been achieved. Featuring excellent stable performance without demagneti-zation due to fluctuation in temperature.
Demagnetization due to aging is 2% or less tor a 10 year period.
Those magnet proximity sensors are typically used in : steel plant machinery and equipment (for raw material handling, iron making, rolling milIs), plating line, large-size material handling ma-chines, automobile manufacturing lines, elevators, cement and related equipment, power station facilities, dam equipment. pollution prevention equipment and devices. mine machinery, Chem-ical industry machinery and equipment. marine product processing machines.
|
|
PSEN sensor technology, Safety for man and machine
Safety switches ... for safety gate and position monitoring :
Hazardous machine movements must be stopped when a guard is opened. It must not be possible to either defeat or manipulate these guards. PSEN safety switches meet this requirement and are therefore suitable for monitoring gates in safety fences for safety zones, for example.
Safety bolt ... for safety gates in a rugged everyday industrial environment :
For safety gates that are difficult to adjust or in areas where safety gates are often opened and closed, protection must be provided against defeat and manipulation, but a long material service life must also be guaranteed. PSENbolt provides a complete solution, comprising safety switch, handle and bolt.
Safe camera systems : to monitor two-dimensional (2D) or three-dimensional (3D) zones.
|
|
|
|
|
|
BNS range magnetic safety sensors serve to monitor the position of sliding, hinged and removable safety guards. Sensors without integral evaluation can only be used for safety duties to DIN VDE 0660-209 in combination with a safety guard monitor of the AES / AZR range for protection up to Control Category 4 to EN 954-1, see chapter 10.2.
The use of magnetic safety sensors is of particular advantage in cases where extremely dirty conditions can occur or high hygienic standards need to be maintained. This is provided by the simplicity of cleaning the units.
A further advantage is the facility for concealed mounting under non-magnetic materials. Working surfaces and storage areas can be arranged without the need for dust-collecting edges or other functionally required cut-outs or projections.
BNS range magnetic safety sensors can also be used in cases where a precise approach is not possible and greater tolerances are required.
Schmersal make both standard and AS-i Safety at Work magnetic safety sensors.
Click here to see the AS-i models Or for the standard models click below
|
|
|
Honeywell Sensing and Control ultrasonic distance sensors solve tough position sensing problems, detecting targets made of practically any material. They work in dry, dusty environments. Particularly useful where other sensing technologies have difficulty, such as: clear or shiny objects, foggy or particle laden air, splashing liquids, etc. Also where larger sensors or longer sensing distances are required.
|
|
Ultrasonic sensor UT 20-240-AIM4
Range to 240 mm
analogue
teach-in
4 ... 20 mA
plug M8 4 pins
product data
|
|
|
Ultrasonic sensors use ultrasonic waves for non-contact and wear-free detection of a large variety of objects. It does not matter whether the object is transparent or opaque, metallic or non-metallic, or of liquid, solid or powdery consistence. Environmental conditions such as spray, dust or rain hardly affect their function.
|
|
Design Features
* Adjustable with XY axis using the PM101/102 magnets
* Cable wiring from the Left of the package
* Repeatablity of operation
* Shunt or direct magnet operation
* Multiple Mode of Operation
Product Comments
* Robust Nylon Housing
* Normally Open
* Surface Mounted by fixing screws
* Fully encapsulated
* Matching Package Operating Magnet PM101 or PM102
|
|
Honeywell environment sealed proximity sensors use a variety of technologies, including Eddy Current Killed Oscillator (ECKO) and Hall-effect, which are used to detect metallic objects passing in front of the sensing face. Once a target metal is detected, a trigger signal is produced and passed through the output conditioning circuitry to give an output that can be configured according to the sensor's application. These rugged, one or two-piece products meet demanding requirements such as temperature, vibration, shock and EMI/EMP interference. They are available in a variety of housing materials and termination styles, and meet military standards.
Best Used For:
Harsh environments such as aerospace, ordnance and marine applications.
|
|
OA-6000
Long range detection area
OPTEX OA-6000 provides a long range detection area even from high mounting position.
High mounting position
with sufficient sensitivity
Stable detection performance at high mounted position.
Stable operation
OPTEX OA-6000 will not activate shutters by too much of a wide detection area.
Flexibility
Detection area can be adjusted 160º vertically and 360º horizontally.
|
|
Analog Sensor
Technological applications: monitoring of positioning, movement, deformation (detectors with analog output signal).
|
|
These are electronic transducers which provide an output signal
when any type of material (Wood, metal plastic, granular and
powder product) comes into their sensing area without coming
into contact.
-Cylindrical series 18 - 30 - 40 mm dia.
-Totally screened and partially screened version
-Adjustable sensing distance
-Amplified 4 wire types NPN or PNP, NO+NC from
10 ÷ 55 Vdc
-Amplified 2 wire types from 20 ÷ 250 Vac/dc
-Relay output type with 1 pole changeover 1A ÷ 220 Vac
-Supply voltage 18 ÷ 50 Vdc / 18 ÷ 240 Vac
-Led incorporated
-Short circuit protection for D.C. and A.C. versions
-Maximum output current D.C. 200 mA, AC. 300 mA
-Types with connector output
-Types with instantaneous intervention or timing up to 15 min
-Protection housing in HOSTAFORM if used as level control
|
|
|
Detector of position for the good and bad material detection conducting of electricity. adjustable the nominal range of the detector is let regulate by means of a potentiometer. The detectors high temperature the detectors resisting the high temperatures normally consist of a head of detection planned for the high temperatures and of a separate electronic module. They are connected together by a cable with Teflon sheath. Favour: detection until 200° turnover
|
|
The SC200 capacitive point level switch is an excellent solution for applications with space limitations. It senses virtually any type of medium and also performs well when coating or product build-up becomes a concern. The unit features an LED for switch point status as well as a potentiometer to adjust the sensitivity of the unit.
SPECIFICATIONS
SC200
Operating Voltage: 12...30Vdc
Current Consumption: 3mA
Adjustment Potentiometer switch point
Output: PNP (3 wire)
Operating Temperature: 14 to 176ºF
RL202: Controller for AC Power Supply
Operating Voltage: 115 or 230Vac (50/60Hz)
Output: 1 SPDT (5A - 250Vac)
Operating Temperature: 14 to 140ºF
|
|
capacitive sensors
- starting at size M12
- plug or cable connection
- normally open, normally closed output
- stainless steel, brass-, plastic housings
- short circuit protection/reverse battery protection/overload protection
- special designs on request
|
|
Features:
- Available in flush mountable body style
- Nickel plated housing with IP67 and IP69 protection rating
- Sensing distance of 2 mm (0.078” to 15 mm (0.591”)
Capacitive proximity sensors are ideal for sensing non-metal objects or for level control of fluids and granular material.
Adjustment can be used to zero out the presence of an object allowing the sensor to sense "through" a bulk material or liquid level.
The operating distance of a capacitive sensor is related to the dielectric constant (εr) of the object material to be detected. The higher the value of εr, the easier the detection of the object will be. The object to be detected through must have a lower εr value.
The threshold level is adjustable via a 20-turn potentiometer located at the rear of the sensor
|
|
|
Warner Electric has many years of experience in applying sensors and switches in motion control applications. Our broad range of innovative and technologically advanced products offers our customers the exact solution to satisfy their sensing applications needs.
|
|
general data mounting type shielded
nominal sensing distance Sn 4 mm
nominal sensing distance Sn adjustable 0,5 ... 4 mm
temperature drift ± 15% (+10 ... +70 °C)
sensitivity adjustment Pot, 270°
output indicator LED yellow
electrical data voltage supply range +Vs 10 ... 30 VDC
current consumption max. 20 mA
output current < 200 mA
voltage drop Vd < 1,5 VDC
switching frequency < 50 Hz
short circuit protection yes
reverse polarity protection yes
mechanical data type cylindrical
housing material PBT
dimension 12 mm
housing length 60 mm
connection types cable
ambient conditions operating temperature -25 ... +75 °C
protection class IP 65
|
|
Level and feed monitoring - that is one of the attributes of capacitive sensors. Irrespective of whether it involves a solid material such as paper or wood, granules or liquids. They reliably detect the status of the product in the production process and during final inspection.
Capacitive sensors supplied by SICK are always convenient to use. Sensing ranges between 1 and 25 mm allow clearance in almost any installation situation and they are extremely adaptable for a wide range of applications.
Thereby these sensors are suitable for extremely adverse industrial environments. Impurities and contamination, dust and airborne spray particles have little effect upon them as does electro-magnetic interference. No wonder that they are installed in the most diverse branches of industry. In the food industry, car industry or in storage and conveying technology.
|
|
|
|
|
|
Features:
Narrow, 7° sonic beam
High resolution 500 KHz ultrasonic frequency
Fast response - as fast as 1.5 ms sampling rate
Self-contained, 18mm barrel or flat-profile housing styles
Field programmable capability in 18 mm and flat-profile models
DeviceNet capability available in flat-profile models
CE Certified
When short-range sensing applications demand repeatable and reliable On/Off control performance, the high-frequency, fixed-window SUPERPROX® Model SM600 Series ultrasonic proximity sensors are the ideal solution. These noncontact, self-contained sensors are unmatched for the reliable detection of objects of all kinds, transparent or opaque, liquid or solid, and as small as 1.6 mm (0.06") rod diameter, regardless of color or shape. Offering a variety of sensing ranges, up to 305 mm (12"), and fixed sensing windows, this series provides for the convenient placement of SM600 sensors throughout the plant.
Given the capability to “back off” from formerly “nearly-touching” mounting positions, these sensors are the solution for such applications as: metal parts as close as 25 mm (1"), moving back-to-back at speeds in excess of 2000 per minute. Others include: cap presence and/or tilt detection, fill-level checking, fill-tube-presence monitoring, downed container detection, case inspection, detection of container edges, web monitoring and CD case inspection where opacity, color and height vary, and wherever there’s a need to upgrade a metal prox function.
|
|
Half-threaded M12x1 Hall Effect sensor Uninflammable nylon glass body sensor
Threaded M12x1 Hall Effect sensor Uninflammable nylon glass body sensor
Cylindrical Hall-Effect sensor diam. 8 Uninflammable nylon glass body sensor
|
|
|
|
|
|
The RPS-400-6 is a compact, high frequency sensor. It was introduced to the Migatron family of ultrasonic sensors to better meet the needs of the machine manufacturing industry.
This sensor has a wide array of application solutions not found in other proximity sensor technologies. The RPS-400-6 has an adjustable two to six inch sensing range with background suppression (meaning any object within the desired range is detected, while objects out of the desired range are ignored).
It cannot be affected by changes in target color or material. The RPS-400-6 is capable of detecting vibrating and/or tilting targets. A response time of no more than 2.1 ms and an operating frequency of 300 kHz makes the RPS-400-6 a repeatable and accurate high speed sensor.
The RPS-400-6 is a three wire NPN transistor output device. The transistor can switch 30VDC at 50 mA continuously. A six-foot cable comes standard with the RPS-400-6. Special cable lengths or connectors are also available for OEM applications.
.
|
|
|
|
|
|
They should be considered as part of the traditional range of
sensors with the difference that electronic portion is
completely separate from the sensing part which is
in the form of an extension which can withstand temperature
from -200 ÷ +250 °C.
These products are used to control the levels of hot
materials such as liquids, oil, powder and plastic granules.
They also sense solid metallic and non-metallic bodies positioned
in areas of high temperature. ALSC Amplifier in plastic housing
with UNDECAL PLUG
-Supply voltage: 24Vac or 110/220 Vac
-ALSC-1 CH type suitable for one sensor
-ALSC-2CH type suitable for two sensors
-Led incorporated
-Sensitivity adjustment
-Relay output changeover 5A to 220 Vac
Sensors for high temperature: stainless steel housing
M18 and M30, sensitive side PTFE
-Provided with connector for connection to the amplifier
-cable length: 2 or 5 metres
-min./max. working temperature from -200 ÷ +250 C
-sensing distance: 5 mm for type SC18M-HT and 15 mm for
type SC30M-HT
-degree of protection: IP68
|
|
|
|