Solenoid valves

Voltage: 27 V - 32 V
Temperature: 0 °C - 55 °C
Pressure: 2 bar - 8 bar

... Pressure range2 - 8 bar ProtectionIP65 (with exhaust filter) SealingNBR Sensor supply100 mA Short-circuit protectedyes Valve function2 x 3/2-way [monostable] Weightapproximately 200 g

DN: 10 mm - 75 mm
Voltage: 230 V
Temperature: -5 °C - 120 °C

SPECIFICATIONS : Sizes 10mm (3/8") to 75mm (3") End Connections Standard-BSP, Optional-NPT. Construction-Body Upto 20mm (3/4") Brass Forged IS 6912 and above in SS ASTM A351 Gr. CF8 ...

Voltage: 24, 220 V
Temperature: 0 °C - 150 °C
Pressure: 0 bar - 8 bar

Voltage: 12 V - 230 V

... PE400, PQ60 and PQ120 series. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to valves if desired. NOTE: Valves are shipped without control switch.

DN: 0.25 in - 0.75 in
Pressure: 8 bar - 100 bar

... down valves, adjustable in their down speed. They close automatically upon release. They can be used for emergency manual lowering or in combination with the EV down valve to achieve an overspeed of the ...

DN: 12 mm - 50 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C

Functioning body material Brass CW617N Pipe Size G1/4″, G3/8″, G1/2″, G3/4″, G1″ KV From 1,5m3/h to 10,2m3/h Seal NBR, FPM, EPDM Applications Water Management Irrigation Air and Gas Management Automation and Industrial controls Industrial ...

DN: 4 in - 24 in
Pressure: 1 bar - 10 bar

... provided by pneumatic solenoid valve. Selective of Normal Opening mode/ Normal Closing mode SRV consists of solenoid valve, air receiver tank (optional) and ...

Voltage: 24, 11, 230 V

Solenoid valves. Solenoid valves for gas , air pressured, oxygène with or without connectors. Essentially adapted for the fluid flow control following the automatic ...

DN: 13 mm - 40 mm
Voltage: 24 V - 230 V
Temperature: -10 °C - 80 °C

DN: 0.25 in - 2 in
Voltage: 24, 42, 110, 230 V
Temperature: -10 °C - 200 °C

... /C and pressure from 5 to 150 psi (0.3 to 10 bar) - Manual Override - Degreased Version - EEx Solenoid- Latching Coil ndumart Series SVP500 Solenoid Valves are suitable for processes ...

DN: 4 mm - 10 mm
Voltage: 10 V - 230 V
Temperature: -30 °C - 80 °C

Control valves for block assembly Nominal sizes from 4 to 10 (CETOP 2 to 5) Operating pressure up to 350 bar Flow rate 140 l/min

DN: 25 mm - 100 mm
Voltage: 220, 24 V
Temperature: -50 °C - 60 °C

Designed as a solenoid shut-off valve with remote and manual (reserve) control of fuel oil in pipelines. External valve heating device (water, vapour) installation is available. Used ...

... Compensation and Cooling Valves Blowing Blocks Blowing Units (Cylinder-Valve combination) Integrated Blowing Stations (Cylinder-Valve combination including Electrical Stretching ...

DN: 0.25, 0.5 in
Voltage: 110, 220, 24 V
Temperature: -20 °C - 60 °C

Explosion proof solenoid valve for a confident control in rough working environments Features - Rotatable valve head for optimal mounting - Direct NAMUR mounting or screw mounting - ...

DN: 1, 1.5, 2, 3, 3.5 mm
Voltage: 24 V
Temperature: -196 °C - 50 °C

... flow, resistant to low temperature, and flexible mounting. Working Principle KLPV-HP proportional solenoid valve is a direct acting proportional valve, where the extent of the internal ...

Voltage: 24 V
Temperature: -25 °C - 60 °C
Pressure: 2 bar - 10 bar

NUTORK SV series solenoid valve includes 5 types of valve body for option - SV100, SV200 direct-acting valve body and SV300, SV400, SV600 pilot-acting valve ...

DN: 50 mm
Voltage: 24 V
Temperature: -10 °C - 90 °C

2/2 Ways Solenoid valve G 2" Inch DN50 made of stainless steel 1.4308 seal NBR force pilot operated nominal voltage 24V DC pressure 0,0 - 6 bar seal: - NBR voltage tolerance: - +/- 10% acc. VDE ...

DN: 5.5 mm
Voltage: 12 V - 230 V
Temperature: -20 °C - 50 °C

Our monostable NAMUR solenoid valves are suitable for direct assembly to your pneumatic rotary actuator. Thanks to its practical reverse sealing, you will get 3/2 as well as 5/2 way function combined ...

DN: 7 mm
Voltage: 24 V
Temperature: 5 °C - 50 °C

The miniature solenoid valve V PK M 007 is intended for assembly in customer valve units as cartridge valve. The small size allows a high packing density; a direct contacting ...

Temperature: -35 °C - 80 °C
Pressure: 12 bar - 350 bar

The MDM-5 pressure-reducing valve continuously enables variable pressure control in a hydraulic system. The most important application for the MDM-5 is in tools that are controlled under pressure, such as clamp or brake ...

Voltage: 12 V - 24 V
Temperature: -20 °C - 50 °C
Pressure: 0 Pa - 50,000,000 Pa

Temperature: 0 °C - 50 °C
Pressure: 3 bar - 10 bar

Device used to shut off the air supply while relieving the downstream circuit by a remote electric control. *Available with MICROSOL type or in compliance with CNOMO standards (to be ordered separately). *Available with ...

DN: 0.75, 1 in
Voltage: 12, 24, 48, 110, 230 V
Temperature: -40 °C - 80 °C

SV Series Solenoid Valves manufactured for jet pulse filter’s dust cleaning. Sizes from 3/4″ to 3″. Explosion Coils on request. Usage Areas Powders, Jet-Pulse Filters Etc.

DN: 0.25 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... -way valve Impulse with differential pressure Body Brass, Stainless Steel Pilot operated piston design valve. The mentioned minimum pressure difference between inlet and outlet is necessary for ...

DN: 0.25 in - 2 in
Voltage: 220 V
Temperature: -10 °C - 150 °C

... PROVAL S100 Series general purpose solenoid valves are used in water, air, oils and other industrial applications limited with the diaphragm material and pressure range. Viton (FKM) diaphragms allows ...