NO solenoid valves

Temperature: -10 °C - 180 °C

The EV-FLUID series consists of a vast range of solenoid valves, with a brass or stainless steel body, suited to intercept the different types of fluid. Available in 2/2 or 3/2, normally closed or normally open, and with different ...

Temperature: -10 °C - 50 °C
Pressure: 0 bar - 10 bar
DN: 15 mm

•3/2 NC/NO direct control microvalves •Possible assembly on single and multiple bases •Monostable manual actuation as standard •Assembly in any position •Operation with filtered lubricated or unlubricated •Maximum ambient temperature: ...

Temperature: -15 °C - 50 °C
Pressure: 0 bar - 10 bar
DN: 8 mm

•3/2 NC/NO direct control microvalves •Possible assembly on single and multiple bases •Monostable manual actuation as standard •Assembly in any position •Operation with filtered lubricated or unlubricated •Maximum ambient temperature: ...

Rotork offers a comprehensive range of pneumatic and hydraulic solenoid valves for hazardous and safe area installation. Available in stainless steel, brass and aluminium with threaded and NAMUR connections. Rotork solenoids offer the ...

Temperature: 0 °C - 82 °C
Pressure: 105 psi
Voltage: 12, 24, 6 V

2-Way Elec Valve, Norm-Open, Mfld Mnted, 12 VDC Additional Information Accessories 2020 2021 EVB-2 EVB-3 Air Flow 0.9 scfm @ 100 psig (25 L/min @ 7 bar) Body Material Nickel Plated Brass Connection Type 0.25" Square Pin Connector Connector AMP ...

Temperature: 0 °C - 82 °C
Pressure: 100, 105 psi
DN: 0.025 in

3-Way Electronic Valve, Normally-Open, 12 VDC Uses Normally Closed, Normally Open, Selector, or Diverter Additional Information Air Flow 0.6 scfm @ 100 psig (17 L/min @ 7 bar) Air Flow 0.6 scfm @ 100 PSI Body Material Nickel Plated ...

Temperature: 0 °C - 82 °C
Pressure: 100 psi - 105 psi
Voltage: 24, 6, 12 V

3-Way Elec Valve, Norm-Open, Mfld Mnted, 12 VDC Additional Information Accessories 2020 2021 EVB-2 EVB-3 Air Flow 0.9 scfm @ 100 psig (25 L/min @ 7 bar) Body Material Nickel Plated Brass Connection Type 0.110" Terminal Spades Connector ...

Pressure: 0 psi - 125 psi
Voltage: 12 V

10mm 10mm direct acting solenoid valves are a cost effective spacing solution for use of single or multiple valves. With a length of 1.08” and height of .52”, they are ideal for applications with limited space. To simplify electrical ...

Pressure: 3,000, 4,000, 5,000 psi
Voltage: 12 V - 50 V

The Lee Miniature Piloting Solenoid Valves are made with small sizes and weights and will still work with the same sturdy size standards that you've come to expect for any kind of industry you are in such as aerospace hydraulic and fuel ...

Temperature: 16 °C - 48 °C
Pressure: 30 psi
Voltage: 24, 12 V

The LFY Series are chemically inert solenoid valves which provide precise dispensing and control of aggressive and sensitive fluids. The LFY Series valves feature a unique internal configuration which minimizes damage to sensitive ...

Temperature: -65 °F - 275 °F
Pressure: 3,000 psi
Voltage: 28 V

The Lee Company’s new 250 Series Solenoid Valve sets a new standard in reducing space, weight and power consumption. Designed for 28 volt systems, this 2 position, 3-way miniature piloting solenoid valve features Lee’s field proven Piloting ...

Temperature: 0 °C - 50 °C
Pressure: -1 bar - 7 bar
DN: 0.5 mm - 0.7 mm

This product has valve functions of 2/2 and 3/2-way NC and NO, and has a construction type known as poppet, with cartridge mounting. It is made using the following materials for the body: PBT technopolymer and zinc-plated steel with a ...

Temperature: 0 °C - 50 °C
Pressure: 1 bar - 7 bar
DN: 3.6 mm

Series K8B pilot operated solenoid valves represent the evolution of Series K8 which has been equipped with a flow amplifier. Their particular design makes these valves ideal for use in applications requiring very compact solutions and high flow.

Temperature: 0 °C - 50 °C
Pressure: 0 bar - 7 bar
DN: 0.65 mm

This poppet type valve provides 3/2 NC and NO functions. It is manufactured from technopolymer (body), NBR or FKM on demand (seals) with other parts made of stainless steel. It can be mounted via screws and installed in any position. ...

Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar
DN: 0.25 in - 1.5 in

These three-way vacuum solenoid valves can be used normally open or normally closed. They are two-position valves and are equipped with highly innovative conical shutters. The shutters are servo-controlled pneumatically and incorporate ...

Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar
DN: 0.5, 0.75, 1, 1.5 in

The direct drive three-way, two-position vacuum solenoid valves have conical shutters servocontrolled by the vacuum. Though normally closed as a standard, they can be supplied as open upon request. Where the connections are located, they ...

Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar
DN: 0.25 in - 1.5 in

The 070 series is a solenoid valve which comprises of two shutter in Vulkolan ® that is installed in a stainless steel stem, anodized aluminium body, spring for shutter return and compound membrane for servo control. Its electric ...

These isolation valves offer 2-way Normally Open (NO) and Closed (NC), or 3-way Directional Control operation. While sharing similar configurations with the KM Series, the KL Series features larger orifice sizes with greater CV values. ...

These pinch valves offer 2-way Normally Open (NO) and Closed (NC), or 3-way Directional Control operation. While sharing similar configurations with the PM Series, the PL Series features larger tubing sizes. Their design ensures that ...

Pressure: 0 Pa - 35,000,000 Pa
Voltage: 12 V - 230 V

This specific device is a 2/2 seat valve that is solenoid controlled. It is a HK EMDV model that is made by HANSA-FLEX. This solenoid controlled valve features a working pressure of approximately 350 bars at the most. Included in this ...

Pressure: 0 bar - 30 bar

EV210A, Direct-operated 2/2-way compact solenoid valvesEV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.The compact design together with the broad range of coils means that EV210A ...

Temperature: -30 °C - 100 °C
Pressure: 0.3 bar - 16 bar
DN: 0.25 in - 1.5 in

EV220A, Servo-operated 2/2-way solenoid valves features a compact design and finds special application in machines and equipment which demand limited space.

Temperature: 0 °C - 100 °C
Pressure: 0 bar - 20 bar
DN: 0.125 in - 0.25 in

The EV310A solenoid valve is a 3/2-way valve that works for pilot valve projects and other small valve needs.

Temperature: -10 °C - 180 °C
Pressure: 0 bar - 16 bar
DN: 0.125 in - 1 in

S6010 Series Stainless Steel 2 way Solenoid Valve is well-fitted for the production of air, water, acid, and other harsh substances. Its tube and internal parts are made from stainless steel. The valve's orifice has a standard measurement ...

Temperature: 0 °C - 55 °C
Pressure: -0.9 bar - 3.5 bar
DN: 3.5 mm

Product characteristics Actuation: electrically actuated Ambient temperature: 0 … +55 °C Duty cycle: 100 % ED Electrical connection: Flat plug receptacles 6.3 x 0.8, industry standard fitting for plug-in connector type B ...

Temperature: 0 °C - 55 °C
Pressure: -0.9 bar - 3.5 bar
DN: 3.5 mm

Product characteristics Actuation: electrically actuated Ambient temperature: 0 … +55 °C Duty cycle: 100 % ED Electrical connection: Flat plug receptacles 6.3 x 0.8, industry standard fitting for plug-in connector type B ...

Temperature: 0 °C - 55 °C
Pressure: -0.9 bar - 3.5 bar
DN: 3.5 mm

Product characteristics Actuation: electrically actuated Ambient temperature: 0 … +55 °C Duty cycle: 100 % ED Electrical connection: Flat plug receptacles 6.3 x 0.8, industry standard fitting for plug-in connector type B ...

Pressure: 6, 100, 30 psi
Voltage: 3, 5, 12, 24 V

The TX miniature switching solenoid valves offer only 8 mm wide housings and allow for space-saving PCB-mounting. Their barbed pressure ports can be used for direct tubing connection or manifold mounting. The simple single piece body ...

Temperature: -10 °C - 60 °C
Pressure: 0 bar - 10 bar
DN: 0.125 in

Material- Anodised aluminium body - NBR seals Threaded1/8 - Automatic diam.4 6 bar flow rate with Δp 1 bar30 Nl/min Operating pressure0 - 10 Bar Solenoid voltage24V DC - 12V DC - 24V AC - 110V AC - 220V AC Minimum power3W - 5VA Manual ...

Temperature: -5 °C - 50 °C
Pressure: 0 bar - 7 bar
DN: 10 mm

The Aignep keeps on enhancing new components, such as the latest "07V" serie of miniature solenoid valves 10mm e 15mm. The valves are made for those requisitions, where high performances in terms of pressure and stream are stated ...

Temperature: -5 °C - 50 °C
Pressure: 0 bar - 7 bar
DN: 15 mm

Operating PressureFor NO: 0-7 BAR / For NC: 0-10 BAR TemperatureMinimum temperature: -5 °C Maximum temperature: +50 °C Flow rate at 6 bar with Δp 1 bar30 Nl/min Orifice Size1.1mm Max Number Of Cycles per minute2700 Life expectancy50 ...

Temperature: -30 °C - 80 °C
Pressure: 0 bar - 350 bar
DN: 6 mm - 11.5 mm

One-way solenoid valves, cartridge type, normally open or normally closed, with or without manual override. Flow rate from 1 to 150 l/min. Max working pressure 350 bar.

Temperature: -30 °C - 80 °C
Pressure: 0 bar - 250 bar
DN: 6, 10 mm

Poppet type solenoid directional valves, double lock, normally open or normally closed, with or without manual override. Flow rate from 1 to 30 l/min. Max working pressure 250 bar.

Temperature: -30 °C - 80 °C
Pressure: 0 bar - 210 bar
DN: 6.5, 4 mm

Spool type solenoid directional valves, three-way or four-way, with or without manual override. Flow rate from 1 to 40 l/min. Max working pressure 210 bar.

DN: 0.125 in - 0.25 in

DIRECTLY OPERATED SOLENOID VALVES The direct control solenoid valves are particularly indicated for the assembling in any position thanks to their small dimensions. They are available in sizes M5, 1/8 and 1/4 in the functions 3/2 ...

Temperature: 10 °C - 50 °C
Pressure: 10 bar
DN: 1.1 mm

MODULAR DIRECTLY OPERATED SOLENOID VALVES The electro valves with modular assembling system, on molded piece or on Omega bar DIN EN 50022. They grant quick reaction time and the possibility to manually act on the bi-stable screw. They ...

Temperature: -10 °C - 140 °C
Pressure: 0 bar - 20 bar
DN: 1.5 mm - 4 mm

VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility to be used in very small places. They’re ...

Pressure: 500 psi

The Miniature 53 Style Modular Manifold from Fabco-Air is a set of either 2 or 3 way solenoid valves. A four way valve is also available. This multi-functional valve is capable of operating with different combinations of ports and manifold ...

Pressure: 270 psi

The Series 3853 has DIN spades or flying leads. The pressure is up to 270 PSI. It has DIN spades or flying leads and the orifice can be easily replaceable.Component features include the proven solenoid operator available in brass/stainless ...

Temperature: 0 °F - 180 °F
Pressure: 500 psi

The Hex Body 53 Style is a two- or three-way solenoid valve. It utilizes 1/8 and 1/4 NPT ports, which are either normally open or closed valve in three porting types. The valve is made up of black anodized hex aluminum. Its working ...

Temperature: 0 °F - 149 °F
Pressure: 0 bar - 101.5 bar
DN: 2.3, 0.8, 1.6 mm

The A-EVC series of electric solenoid valves are typically used for vacuum and pressure applications. It is available in three body types namely the Manifold Mount A-Di, the Body Ported A-DP and the A-DG The manifold mount is used ...

Temperature: -20 °C - 80 °C
Pressure: 0 bar - 350 bar
Voltage: 24 V

The Zone Valve is primarily used for oil applications. It is possible to have between 1 to 5 Zones. Each Zone or outlet is independently activated by 24 V DC solenoid coils. This valve can be used in applications where it is necessary ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 10 bar
DN: 0.125 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 12 bar
DN: 0.125 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 50 bar
DN: 0.125, 0.25 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...

Temperature: -10 °C - 50 °C
Pressure: 0 bar - 10 bar
DN: 0 mm - 38.1 mm

Univer series AA miniature electropilots U1 provide ambient temperature range of -10 to +50°C and maximum fluid temperature of +95°C. Fluid used include 10 µm filtered air with or without lubrication and neutral gases. Other fluids can ...

Pressure: 30 bar

The 700 series is a pilot actuated pressure valve with a precision adjustable pilot setpoint. Perfect for use in the applications which require intrinsic safety, pneumatic sequencing, and precise pressure relief. Four mounting styles ...

Pressure: 2 psi - 100 psi

The 700 Pressure Series is a pilot actuated pressure valve with a precision adjustable pilot setpoint. Perfect for use in applications which require intrinsic safety, pneumatic sequencing, and precise pressure relief. Four mounting styles ...

Temperature: -10 °C - 140 °C
Pressure: 0.1 bar - 20 bar

Solenoid valves – 2/2-way design – Direct acting – Positivley controlled – Pilot control Operating temperature-10°C to +90°C NBR -10°C to +140°CFKM Electrical connectionFor PG9/ PG11 connector in line with ISO ...

Temperature: 0 °C - 50 °C
Pressure: 3 bar - 10 bar

Device used to shut off the air supply while relieving the downstream circuit by a remote electric control. *Available with MICROSOL type or in compliance with CNOMO standards (to be ordered separately). *Available with ...

Temperature: -5 °C - 50 °C
Pressure: 2.5 bar - 10 bar
Voltage: 24 V

The even more increasing demand for great compactness and versatility of pneumatic products has led us to develop AIRCOMP MP 160 valves Line. MP valve islands can be considered real integrated systems. Besides their remarkable flexibility ...

Temperature: 0 °C - 80 °C
Pressure: 0.2 bar - 400 bar
DN: 0.8 mm - 80 mm

The 2 Port direct acting normally closed solenoid valve is suitable for vacuum with 10 - 6 torr. It mounts in any position and has a vibration resistance until 9g. It is suited for high speed cycling that reaches up to 1000 cycles/min. ...

Temperature: -20 °C - 80 °C
Pressure: 2 bar - 150 bar
DN: 0.7 mm - 25 mm

The 30000 series 3/2 way direct-acting solenoid valve is designed to enable mounting at any position possible. It integrates a bubble tight shut-off gear. This system established good resistance to vibration impact up to 9 g. Speed frequency ...

Pressure: 0.2 bar - 25 bar
DN: 1.2 mm - 25 mm

Engineered Valves are essentially a group of Solenoid valves which have been designed in terms of performance, power consumption or protection to suit the most demanding application in the process Industries. These valves offer high technical ...