|
|
HY-T® Torque Team™
Classical cross-section joined belt for shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
HY-T® Wedge Torque Team®
Narrow cross-section joined belt for higher performance and shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
Torque Team (Laminated)
Narrow cross-section joined belt with “engineered slip” which is particularly effective when installed on drives that can experience frequent stalls caused by obstructions
Torque Team Plus®
Narrow cross-section joined belt with Flexten™ cords for industry's toughest drives and/or high horsepower drives that require higher tension, increased resistance to shock loads.
|
|
HY-T® Torque Team™
Classical cross-section joined belt for shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
HY-T® Wedge Torque Team®
Narrow cross-section joined belt for higher performance and shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
Torque Team (Laminated)
Narrow cross-section joined belt with “engineered slip” which is particularly effective when installed on drives that can experience frequent stalls caused by obstructions
Torque Team Plus®
Narrow cross-section joined belt with Flexten™ cords for industry's toughest drives and/or high horsepower drives that require higher tension, increased resistance to shock loads.
|
|
|
|
|
|
Construction:
- Raw edge construction, ground.
- Narrow cross-section.
- New, optimised notch profile reduces and evenly distributes thermal and bending stresses. Notch depth is in proportion to the crosssection to ensure perfect stability.
- Precision-ground sidewalls give a uniform wedging action.
- Fibre-loaded elastomeric compound withstands heat, ozone and sunlight.
- Flex-bonded polyester tensile cords are vulcanised as one solid unit,increasing the belt’s resistance to tensile and flexing forces.
- Double Flex-Weave® textile backing protects the belt against wear — especially when back idlers are used.
- Cross-cords improve belt stability.
- Even with severe slippage, the belt will not catch fire from heat buildup.
Advantages:
- The most powerful belt in Gates’ industrial V-belt range.
- Excellent performance/cost ratio.
- Increased transmission efficiency as compared to other V-belt types.
- Cost and space savings.
- Maximum belt life reducing maintenance time.
- Match system: all sizes meet Gates UNISET tolerances.
|
|
optibelt Super TX M=S
Wedge belts, raw edge, moulded cogged
optibelt Super VX
Variable speed belts, raw edge, moulded cogged
optibelt KBX
Kraftbands, raw edge, moulded cogged
>> optibelt Super X-POWER
V-Belts, raw edge
|
|
Various colors, hardness, additional backings and sizes. Standard section
sizes 3L, A, B, C, D, E. Backings available include: Flat, Twin, Crown-Top, Ridge-Top, Hi-Ridge-Top, Wing-Top, Ruff-Top.
|
|
|
|
|
|
FHP Belt
Classical profile light duty v-belts for light machinery, home appliances, farm machinery, shop equipment, fans, blowers, etc.
GY Metric
GY Metric belts are strong, flexible, and work in a wide temperature range. Our years of manufacturing experience coupled with our expertise in rubber compounding provides for superior performance under the toughest conditions.
Hex Belt
Double side classical cross section belts are used on drives having one or more reverse bends where power must be transmitted to or from the belt in both standard and reversing positions.
HY-T™ Plus
Traditional classical belts designed for operating at higher speeds over small diameter pulleys and short center distances. Also for use in multiple V-belt drives where high shock load and heavy duty loads are encountered.
HY-T™ Wedge
The original narrow cross section v-belt distributing stresses more uniformly over tension members delivering more consistent and reliable power transmission.
Insta-Power with Flexten™
Dual branded, high-performance, Flexten reinforced classical v-belts for both lawn and garden and heavy duty industrial applications.
Neothane
Specialty belt for specific types of machines and equipment that require a light, abrasion resistant, smooth operating smaller V-belt.
Open-End V
Classical cross section belt lengths ideal for problem applications and emergency belt replacements where drives are difficult to access or disassemble.
Torque Flex®
Premium classical profile belt delivering increased HP over traditional classical belts. Designed for tough, small sheave diameter, high tension drives.
|
|
- V-belt & Synchronous models
- All belts for our entire porduct line
- Link V-Belts for temporary or permanent replacement
- From 18" to 560"
|
|
V-BELTS are manufactured in polybutadiene compound. High variety of belt sizes available permits the application of Megadyne V-belts on all types of industrial equipments.
Applied technology allows to reach so good dimensional precision in V-BELTS to make them suitable for multiple transmission. This dimensional stability continues also during belt use.
|
|
Optibelt Super X-POWER is a new high performance raw-edge V-belt.
This new generation of V-belts offers a variety of application possibilities
in general industrial machine construction for complex drive solutions involving
extreme load conditions with small pulley diameters and high speeds.
This combination - tension cord with minimal elongation, extremely abrasion
resistant chloroprene rubber, fibre filled compounds and optimised moulded
cogs - guarantees unique benefits
· Minimal belt elongation
· High power ratings
· Small pulley diameter
· Precise and smooth running
· High efficiency
· Extreme transverse rigidity
· Low maintenance
|
|
optibelt SK
High performance wedge belts
>> optibelt Red Power II
High performance wedge belts
optibelt VB
Classical V-Belts
optibelt KB
Kraftbands with high performance
wedge belts
>> optibelt KB Red Power II
Kraftbands with high performance
wedge belts
optibelt KB
Kraftbands with classical V-Belts
optibelt PKR
Endless V-Belts with special top surface
optibelt KB
Kraftbands with special top surface
optibelt DK
Double V-Belts
|
|
Strong load capacity, good slip, recommended for long spacings and full-loaded starts.
Sections 10x6 13x8 17x11 20x12,5 22x14
|
|
This is the banded version of the "Source of Savings" Gold Ribbon Cog-Belt combining the longer life, energy savings, and superior operating characteristics of the Gold Ribbon Cog-Belt with the stability of a banded v-belt. The Gold Ribbon Cog-Band prevents belt whip and rollover on long center distance drives. The Gold Ribbon Cog-Band provides excellent service in harsh environments and high shock load situations.
Available in BX, CX & DX cross-sections from 55 inches to 360 inches.
|
|
Metric Power-Wedge v-belts are manufactured for high performance. They are highly flexible, resist stretch, heat, oils, chemicals and ozone, and dissipate electrostatic charges.
Metric Power-Wedge® v-belts are designated with four letters (SPZX, SPAX, SPBX, SPCX) which identify the section and a series of numbers which represents the pitch length in mm.
|
|
The Super Power-Wedge® V-Belt enables you to design more compact multiple belt drives. Double-wrapped cotton-neoprene cover provides superior wear characteristics and resistance to oil, heat, grease and ozone. Proven wedge configuration provides controlled power transfer.
Available in 3V, 5V, & 8V cross-sections from 25 inches to 500 inches.
|
|
|
|
|
|
The CONTI SYNCHROCHAIN® - with its newly developed CTD profile, original design and selected materials - ensures reliable power transmission for high torques and for high dynamic stressing. As the first drive belt of this high-performance class it permits reverse flexing in multi-pulley drives and is the optimum alternative to chain drives.
The drive system in CTD profile
The newly developed CTD profile ensures faultless meshing and hence smooth running at high speeds. At the same time it prevents a jump-over at high torques. So the CONTI SYNCHROCHAIN® is well able to cope with a wide range of requirements. It is suitable for new drive designs and at the same time also compatible for use in existing systems. Available in pitch CTD C8M. Details of pitch, lengths and widths can be obtained on request.
Properties:
* oil-resistant and unaffected by tropical climates
* designed for high dynamic stressing up to 40 m/s
* maintenance-free
* suitable for temperatures from -40 °C to 100 °C
* withstands reverse flexing
* very hard-wearing
|
|
Premium belt performance at standard belt pricing.The Power-Wedge Cog-Belt employs
neoprene Raw Edge sidewall construction and a unique Con-Flex® cog design that assures longer life and controlled slippage.
Power-Wedge Cog-Belt combines the advantages of the newer, narrow belt wedge design with Raw Edge Cog-Belt performance for maximum operating efficiency in a compact drive package.
Available in 3VX, 5VX, & 8VX
cross-sections from 25 inches to 200 inches.
|
|
HUTCHINSON POLY V®, the belt for all applications.
Market sectors :
Ventilation / Air Conditioning
Agricultural
Food Processing
Heavy Industry
Mining and Quarrying
Light Power Tools
Fitness
Industrial Cleaning
Urban Amenities
Others ...
Sections : PH, PJ, PK, PL, PM
Mutlipurpose : Power range from 0 to 600 kW
Economical : One Poly V® can replace up to 15 V belts. Savongs on pulley material ( reduced diameters and widths. Minimum Poly V® diameters 9 mm- V belts : 56 mm)
Reliable : Longer life, reduction of maintenance costs (less wear, no matching)
Compact : High speed ratio (Poly V ® 1:60; V belts 1:20), serpentine drives.
|
|
A Complete Selection Of BROWNING Products Leads To The Right V-Belt Drive For Every Application
The extensive BROWNING V-drive line means maximum economy, versatility and prompt availability for your every application - truly the right drive every time...for every service.
With the introduction of the revolutionary B5V Line, Browning brings up-to-the-minute technology to drive design, operation and inventory control. Now - more than ever - when you specify Browning, you select from the most extensive V-belt drive line in the world. New Combination Groove B5V - with 120 components covering 10-75 HP range. Mix and match with conventional A, B and 5V components
|
|
| ... products without technical information |
| |
 see the results for the following category : Pulleys |
|
|
