|
|
|
|
|
|
The simplest, the most unexpensive and the most competitive bagging machine to solve the various requirements of modern mailing successfully. Half-automatic and easy to use, completely controlled by an electronic board: the only thing the operator has to do is simply to feed products vertically into the metal “throat of a shirt“ in fact the machine itself will automatically take care of the rest. After the bag width is adjusted through the metal “throat“ to fit the product width, a photo-eye senses the top and the bottom of the product and switches on the plastic film-unwinding device. A bag is formed around the product by the adjustable width folding plates. The bag is then sealed and cut to the product length. Ideal for wrapping newspapers and magazines, catalogues and wholesale publications, manuals and any commercial printed materials, booklets etc An alternative and cheaper way to send your mail out.
Available also BAGGING MACHINES with horizontal feeding for higher outputs: Speedbag H and Speedbag HS to be visited in our website.
SPECIFICATIONS for Speedbag EV:
- Simple and Compact
- Vertical feeding
- Automatic cycle controlled by PCB
- Bag sealing is controlled by a microprocessor
- the bag width is adjusted through a metal “throat“ and the bag length is controlled by a photo-eye; envelope dimensions up to 350 x 270 mm
- Motorized film-unwinding
- Wide table-top for magazines and labels
- Motorized output conveyor belt on request
- The machine works with transparent or printed LLDPE (thickness 15 ÷ 40)
Machine manufactured according to CE rules
|
|
Our VFFS (vertical form fill seal) baggers provide high performance, a quality package, and increased operational efficiency. The ability to integrate the VFFS baggers with additional upstream and downstream equipment supplied by Bosch and other third party equipment suppliers provides a flexible solution for increased production and output.
Bosch VFFS baggers can produce a variety of bag styles – pillow, gusseted, stand up, flat/block bottom, doy, corner seal, and more, including a zipper closure option.
|
|
vertical bagger SVMA-M
ADVANTAGES
- Easy comprehension of Electronic
Management of all machine parameters.
- Extremely versatile machine with possible coupling with any kind of weigher (linear or multihead model) or volumetric doser (bucket or auger model).
-Reduced machine dimension and operating functions particulary ergonomic with easy manual regulations.
- Frame engineered to easily allow maintenance and cleaning.
|
|
|
|
|
|
Vertical form fill and seal wrapper for producing pillow pack bags from a reel of heat-sealable packing film.
- Comet is the expression of the highest level of PFM technology and design applied to vertical wrappers. The machine has been designed for high speed wrapping and round-the-clock applications.
- Suitable for wrapping granular products (chips/crisps, candies and many others) combined with multihead weighers and volumetric dosing systems.
- New body design, "Hermetic Box", protected from infiltrations of liquids and powders.
- New High Speed Long Dwell rotary sealing system, tested at 180 mechanical cycles per minute. Sealing crimpers removable from the front.
- Full servo wrapper driven by brushless servomotors with axis motion controller.
- MMI with Colour touch screen. Operator's friendly software. Integrated modem for on-line Teleservice.
- Expansion reel holder with self-centring system.
- Power feed roll controlled by independent motor.
- Extremely compact design for a perfect control and synchronisation with feeding systems thanks to the short product falling distance.
|
|
Vertical form, fill and seal packaging machine with manual introduction of product and start by means of a foot switch or optic eye at the entry of machine forming tube.
The sealing system (electronic impulse) is structured in a cooling circuit by means of a pressure pump, radiator and liquid (anti-freeze liquid) for temperature thermal stabilization. this feature grants long operating periods and a strong seal, on any kind of plastic film (both one side or two sides sealing)
Control of all operating functions by means of an "eprom", an easy symbols panel and an electro-protected control card.
Film sliding by means of motorized rubber tracks
Bag length achieved by means of an electronic encoder or optic eye centering film print.
Bag length (standard models): from 50 mm. to 350 mm.
Sealing units impulse type self-stabilizing in cooling circuit with anti-freeze liquid
Bag width easy interchangeability of forming tubes/collars diameter: 60 - 76 - 88 - 100 - 135 mm
|
|
M.C. Automazioni s.r.l. presents Maya, an entry-level vertical form fill and seal machine offering the same format as the rest of the range.
Manufactured in stainless steel AISI 304 and available in servo motor, the Maya offers quality and reliability at an affordable price.
Controlled by simple to operate plc software, keeping mechanical adjustment to a minimum and preventing expensive downtime.
With features often seen on higher priced machines, the Maya is ideal for anyone requiring vertical packing for the first time.
On request, our experienced technical staff can provide information on how the Maya could be used in future packaging applications.
|
|
M.C. Automazioni s.r.l. introduce the Ecospeedy, a vertical form fill and seal machine incorporating new levels of technology, reliability and versatility at an affordable price.
Manufactured in stainless steel AISI 304 and available in servo motor and pneumatic versions, the Ecospeedy is easy to use and maintain.
Controlled by simple to operate plc software, keeping mechanical adjustment to a minimum and preventing expensive downtime.
On request, our experienced technical staff can provide information on how the Ecospeedy can provide innovative packaging solutions.
|
|
The new generation of vertical form, fill and seal machines, answering the challenges of flexible packaging.
CHARACTERISTICS :
- Machine available in 3 sizes for maximum bag width of 260 mm, 400 mm and 600 mm.
- Flexibag Bi for intermittent mode and Flexibag Bc for continuous mode.
Construction with closed frame for low maintenance even in aggressive environments.
- Machine requires minimum floor space thanks to the compact design, approximately 2 x 1 m. (*)
- Available with all feeding systems, such as multi head scales, auger feeder, volumetric cup feeder, piston pump, etc.
- Twin machine to double effective production.
- Highly reliable and productive machine, for the most high requirements.
- Extremely modular and flexible concept for the most diverse applications.
- Solid construction with very low maintenance cost.
|
|
BAGGER RM-25C CONTINUOUS MOTION
Continuous motion bagger RM-25C with servo driven sealing systems to give increased packaging performance at high speeds. Maximum efficiencies can be achieved on a large range of products and bag types such as pillow, pouch, stand up, square corners etc. Both constant sealing (AC) and impulse sealing (AI) systems are available to seal all kinds of mono, multi layer, co-extruded and laminates film types.
Specifications:
- output up to 160 cycles/minute,
- adjustable sealing temperatures (AC version),
- easy to operate - touch screen controls,
- film auto tracking,
- film splicing unit,
- low level film alarm,
- film unwind system,
- encoder or photocell film measurement.
|
|
|
|
|
|
VERTICAL FFS PACKING MACHINE FROM FLAT PE ROLL MOD. ILERBAG-V
Vertical Form-Fill-Seal packer from PE sheet: right solution for those industries looking for maximum reliability, versatility, automation level and autonomy for their packaging processes, as well as an important saving in packaging costs.
- Compact machine, reduced height.
- Quick and easy change of roll by means of tape.
- Film centring by photocell.
- ROPEX temperature unit and control.
- Air-cooling for seal with accumulator.
- OPTION: water-cooling.
- Servo driven horizontal sealing jaws.
- Hydro-pneumatic pre-closing device. It incorporates product detection at sealing zone.
- Sealing and cutting group pneumatically driven.
- Film unwinding through frequency inverter.
- Side gussets forming device.
- Bag support saddle with double action (bottom tilt and rejection).
- Pneumatic product shaking with presence detection.
- Tilting exit belt to make easier change of formers and maintenance tasks.
- Touch panel for operator interface with every information related with machine working, production, self-guided menus, self-diagnostic, etc.
- Weighing menu integrated in touch panel.
- Step joined at main frame to accede adjustments.
- All adjustment focussed on reduced area.
|
|
- high speeds with total integration
- greater than 95% efficiency
- rapid former changes using the ‘auto connect’ & ‘upload assist’ features
- wastage rates down as low as 0.5%
- small footprint reduces floor space costs
- all of the above deliver lowest ‘cost of ownership’ and highest ‘return on investment’
|
|
|
|
|
|
MC AUTOMAZIONI is glad introducing you a new machine allows to fold the top of the bag made by a vertical machine integrated with the line, here below described :
Station 1 : The bag comes fully of the products from the vertical ffs integrated with the line, bag with the top side open (not welded), the system keeps the bag on stand up position and progresses through a line with cups
Station 2 : a cold jaws takes the top of the bag and shake it in order to adjust the product inside the bag
Station 3 : A device such the air inside the bag then seal the top side of the bag
Station 4 : a rotating double-head performs the double folding of the top of the bag already welded
Station 5 : label applicator to apply a reclosable label on the top side of the bag, keeping the double fold top seal close to the bag
Details :
• Length (high) of the bag : Min 150 mm – Max 350 mm
• No pillow bag workable with this kind of machine
Optionals on request :
1. Label applicator : here above included;
2. Printer unit : not included
3. Bottom side bag label applicator : not included
4. Front / back side bag label applicator : not included
|
|
The Mascotte is the vertical packaging machine simple, economical, handy, which allows, with a single operation, to macke the bag directly from th eroll, to fill it and to cut it. Loose items or single pieces which are
to be packed should be put in the shaping collet access space by hand or with the help of bathcers or pieces counters.With a single action you can obtain: a vertical welding which fixes the tubular; cutting and
ejection of the package.
Advantages: - bags are not to be prefabricated: they are automatically made starting from the plane sheet roll; - with one lever you can master the mechanical operations; - the tralling
of the film and the length ot the bag is made by hand. Ideal for every kind of foodstuffs, metal or electric smallware, etc.Materials available: polyetylene, polypropylene.
|
|
Packaging machine W18 :
Compact vertical packaging machine.
Processes polyethylene flat film.
Throughput: up to 40 bags/min.
Bag width: up to 180 mm
Bag length: infinitely variable
Passage Clearance: 90 mm
|
|
|
|
|
|
Automatic vertical packaging machine designed to form, fill and seal on 4 sides sachets of thermosealable material.
Constructed with a modular system to facilitate rapid size change operations.
The machine frame is constructed in specially treated and hardened aluminium, all parts in contact with the product are in AISI 316 L stainless steel.
The reel of packaging material is housed inside the machine, completely enclosed and protected from external contamination; the reel shaft is positioned to permit easy mounting.
The machine comprises 5 or 6 Brushless servomotors (according to whether the tissue feed system is single or double). Modem for remote diagnosis of PLC software status and display settings.
Servomotor controlled Tissue feed system running on up to 12 production lanes. Maximum flexibility of tissue folds and liquid dosing according to each customer's requirements, large reels of tissue and film to increase autonomous running time.
Feeder suitable for the production of impregnated tissues that are folded as requested.
It is possible to vary both the ìwidth and the length.
Installed power 12 kW Air consumption 30 Nl/min. at 6 bar.
|
|
|
|
|
|
The Omag C3 for granules and free flowing products is available in configurations from 2 up to 12 lanes and allows to pack all granular products such as: crystal sugar, sweeteners, salt, pepper, tea, sugar based soft drink powders, chemical and pharmaceutical granules, etc. under four side seals sachets.
Sachet size: On version up to 3 lanes the sachet size is fully adjustable, within certain limits, on both width and length. On machines from 4 lanes onwards, width has a pre-selected size whilst length, in most cases, remains adjustable. Depending on the considered unit, the sachet size can vary from a minimum of 35 x 40 mm up to a maximum of 150 x 220 mm. The machine is manufactured for actual working width from 200 up to 500 mm than can be divided into a number of lanes which depends on the considered individual sachet width. Special versions for different sachet size can be designed on request.
Dosing system: by oscillating hopper and twin set o distributing cups. The dose adjustability range is within a volume ratio of 1:2.
Speed: depending on the volume to be packed, the machine can achieve up to 200 strokes/minute and output will be proportional to the number of lanes of the considered unit. The C3 is a continuous motion machine starting from one reel of heat-sealable packaging film and performing sachets with print centering on both sides. It is a mainly mechanical unit with an electronic card controlling the main operating processes. The operation, the adjustment and the maintenance are definitely simple and do not require any especially skilled staff.
|
|
Packaging machine H28/H45/H65 :
Compact vertical packaging machine with lateral filling tube.
Processes polyethylene folded film.
Throughput: up to 40 bags/min.
Bag length: infinitely variable
Passage Clearance: 90/180/180 mm *
*depending on version
|
|
|
|
|
|
Ishida Atlas Snack Bagmakers offer strong seals and backseals of excellent appearance on a wide range of films. Advanced engineering underpins their film handling, pack loading and sealing systems, ensuring reliable and stable operation even at the highest speeds. The result is first-rate productivity with product and film waste sharply reduced. All models will integrate fully with any fast multihead weigher to deliver high efficiency packing. They integrate with Ishida bagmakers to form single-manufacturer systems with efficiencies of up to 99%.
- Speeds up to 200bpm (Atlas 122) or 110bpm (Atlas 112)
- Ishida Rotary Jaw motion, with high-pressure, anvil-knife sealing delivers quality seals, even at highest speeds
- With Ishida’s optional autosplice unit, can deliver efficiencies of 99%
- Product-free seals assured by four separate systems, including Ishida stripping mechanism
- Precise, consistent film feed due to load cell-driven film tension control and servo motor-controlled pull-down belt
- Atlas 122 integrates seamlessly with an Ishida weigher to give high-efficiency packing system
- Two Atlas 112s integrate seamlessly with a single Ishida weigher to give efficient, space-saving packing system
|
|
|
|
|
|
VERTICA FORM FILL SEAL MODEL PMV-300
For packing a wide range of liquids and semi liquids in pillow bags and Tetrahedron pack.
Easy and simple to operate.
Material can be pack polyethylene and other laminate.
The vertical form fill seal machine, forms the bag, fills it with the product and seals it in a full automatic cycle.
The transport of the wrapping material is affected by a pair of special rubber belt, and operates by mechanically driven system.
The vertical sealing jaws are pneumatically operated.
The horizontal sealing jaws are pneumatically operated.
Foil transported threw dancing roller system to insure low tension.
The feeder of the foil from the jumbo roll is done by motor gear.
The control of the machine is done threw our external control panel key board.
Features
- The bag length is electronically adjustable as required on the machine itself while it running. And it can be varied with in 1 mm.
- Photo cell to center the print.
- End of reel detector.
- Electronic variable speed.
|
|
The Master pneumatic is an fit for the realisation of plastic bags fromplain or single-fold foil reels. It was constructed to satisfy all operating convenience, versatility, solidity and reliability requirements, especially in case of small and medium production capacities. The following operations are fully automatic: the vertical sealing of the tubular as well as the horizontal closing of the bag bottom; the bag sliding as well as the length control; the bag top cutting and horizontal sealing. The sequential execution of the operations is controlled by a PLC, the functions of it can be modified directly by the keyboard. The PLC programming
foresees an input for the control of a weighing system. The operation speed of the is of 10 bags/min. (according with product). The machine may work with polyethylene from 30 to 80 microns thickness as well as with coextrusion foils from 35 to 40 microns.
|
|
robag®3 ttx, the ultimate in economic value, with two Vertical Form Fill and Seal
(VFFS) packaging systems in one machine
- dramatically reduces floorspace costs – eliminates the 1.8 to 2 meters of space required between two separate VFFS packaging systems
- reduces running costs (air, electricity etc) when compared to running two separate VFFS units
- high speeds with total integration
- efficiency – greater than 95%
- rapid former changes using ‘auto connect’ upload assistant features
- minimise wastage – rates as low as 0.5%
- all of the above deliver lowest ‘cost of ownership’ and highest ‘return on investment’
|
|
The XPDIUS VFS series bagger is engineered for high-speed applications. All models are constructed in stainless-steel and include automatic film tracking, touch screen controls, Mitsubishi PLC, and servo-powered sealing jaws / pull belts.
Models include the XP-800 and XP-1200 for bag sizes up to 12" wide with speeds of up to 120 cycles per minute.
XP 800
Speed up to 120 bags per minute
Bag Widths up to 8 in. / 20 cm.
Bag Lengths up to 12 in. / 30.5 cm.
Bag Materials Laminated & Polyethylene
Electrical 220 V single phase
Air 85 PSI
XP 1200
Speed up to 90 bags per minute
Bag Widths up to 12 in. / 30.5 cm.
Bag Lengths up to 16 in. / 40.5 cm.
Bag Materials Laminated & Polyethylene
Electrical 220 V single phase
Air 85 PSI
|
|
|
|
|
|
The most compact and simple vertical form/seal available on the market.
These mid-range production machines are easy to operate and inexpensive. Produce and seal bags made from polyethylene or laminates at speeds of up to 60 bags per minute.
Easily interfaced with any type of filling equipment. Available in 5 models for different bag size requirements.
The Vertek Junior is the most advanced simple, compact vertical form/seal available today. Complete with servo-drives to control the film pull belts, the VerTek Junior can produce up to 50 bags per minute effectively and efficiently.
Speed up to 50 bags per minute
Bag Widths 1.5 to 5 in. / 3.75 to 12.5 cm.
Bag Lengths Up to 8 in. / 20 cm.
Bag Materials Laminated & Polyethylene
Available in 4 different models, the machines can handle a wide range of bag sizes that are commonly used for packaged products. From a maximum of a 7.5 inch wide bag on the 750 model to 22 inches wide on the Vertek 2200, they are simple to operate, service and maintain. The Vertek Series offers the best return on investment.
Electrical 220 V single phase
Air 80 PSI
|
|
GA 420 / 520 / 620 C - Automatic packaging Machines
VFFS automatic packaging machines for Food and Chemicals
General description :
Vertical form-fill-seal machines to create bags with three hermetic seals starting from a reel of thermoseleable film of max reel width 450 mm, 550 mm, 650 mm.
Constant heated crimped seal, suitable for coated materials: polypropylene, aluminium/polyethylene, paper/polyethylene.
Suitable to pack liquid, grains or powder products, for food and non food market.
The machine is equipped with safety devices and all requirements according to the law requirement agains accidents
|
|
|
|
|
|
Kliklok-Woodman's new EVOLUTION continuous motion bagmaker is the world's fastest vertical bagmaker, capable of true production speeds to 225+ bpm. Patented, independently phased, twin sealing jaws separate the Evolution from all other high speed machines, and virtually eliminates lost cycle time. The unique center mounted filling tube and natural counterbalanced sealing profile are designed to provide vibration free, extremely smooth operation at all speeds.and allows us to directly mount many of our Sigma Plus® weighers to the Evolution for an extremely compact footprint. Our color graphic Insight® operator interface coupled with "off-the-shelf" PLC controls insures industry leading ease-of use and the highest reliability. Evolution is also extremely versatile, handling package sizes up to 300mm (12") wide and multiple package styles.
Standard Features
- Twin Independent Servo Controlled Seal Jaws
- Insight® Color Touch Screen Operator Interface
- "Off-the-Shelf" PLC - Based Control System
- Instant Product/Program Changeover
- Quick-Change Former Assembly (No Tools)
- Unique Center Balanced Construction
- Fiber Optic Registration Control
- Programmable knife cut-off
- Film Run-out Alarm
- Pneumatic Film Supply Spindle
- Hinged Electrical Cabinet for full machine access
- Rotary Back Seal Band
- Servo Controlled Film Vacuum Pull Belt
- Motorized Film Positioning
|
|
Ice-cold packaging with the VPL 400 The solution for the frozen food industry :
With the VPL 400, consequently following the demands of the frozen food industry, ROVEMA begins a new era in the form-fill-seal machine area.
Arguments that convince:
Maintenance and wear resistant with precise modern linear motor drive system
Very high performance, versatile and flexible – responds quickly
Especially quiet, since it moves on magnetic field of air
High seam quality by individual sealing time and pressure settings
Even difficult films can be processed at a high output rate
Products can be changed quickly and effectively
Stainless steel as standard design
High cycle number up to 150 min – even with long bag lengths
|
|
The machine has been developed to offer the maximum accessibility to all mechanisms, designed operator friendly minimizing the requirements of maintenance, and easy to adjust.
All mechanic parts and elements subject to frictions are designed with systems of permanent greasing.
The mechanical concept includes the variable cycle enabling the machine to optimize its operation in any working condition, offering always the best performance.
|
|
Vertical wrapping machine is a vertical form fill and seal unit. It is basically designed to handle an almost endless variety of flowable products, liquids, powders and bulk solids which
FW77
- Conversation style touch panel mounted compacted vertical wrapper.
- Smooth, accurate, high speed operation servo motor film drive.
Up to 100packs/min
FW7700
- Simple communication through conversation style touch panel with color display, standard vertical wrapper.
- Smooth, accurate, high speed operation with servo motor for film feed & end sealer drive.
Up to 100packs/min
|
|
|
|
|
|
Weighpack Systems offers complete packaging systems to automatically weigh & package your products. Typical applications include fresh & frozen fruits, vegetables, meat, poultry, seafood, candy, coffee, spice, grains, snacks and much more. Bag styles include: stand-up pouches, pillow bags, jars, boxes and more.
Dry Products
Products like confections, peanuts, plastics, cookies and pharmaceuticals are just the tip of the iceberg when it comes to the capability and range of our packaging systems.
Candies, Grains, Cereals, Rice, Beans, Snack Foods
FILLING
Depending on production requirements, our CombiScale delivers the best performance possible for you weighing and filling needs. Available in 8, 10 and 14 head models, multi head weighing technology offer the most precise accuracy possible.
BAGGING
Our Vertical form & seal bagging are available for all bag sizes up to 22 inches wide.
If you need to use a pre-made bag, our Swifty, Bingo or Zippy bagger will handle the job.
CONVEYING
Infeed, Indexing and Exit conveyor are all available
|
|
|
|
