MAHR micrometers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Measuring range: 0 mm - 50 mm
• Reading to 0.001 mm • Hardened steel calipers • Lever slider locking • Mm/inch conversion • Zero setting at any position • Absolute and incremental measurement modes • Supplied with a calibration wrench
Measuring range: 0 in - 4 in
Resolution: 0.001 mm
This is an IP65 micrometer offering movement four times as fast as a standard micrometer. It presents you with the following benefits: •Faster measurement is achieved by using a coarser thread which ...
MITUTOYO
Measuring range: 0 mm - 1,000 mm
Lightweight workshop design with baked-enamel-finished frame. •Equipped with Ratchet Stop for constant measuring force.
MITUTOYO
Measuring range: 0 in - 36 in
This Digimatic Micrometer offers you an extra wide measuring range, and has the following benefits: •Easy, interchangeable anvils allow a wide range of measurements. •Ratchet stop for constant force.
MITUTOYO
Measuring range: 46 mm - 95 mm
Resolution: 1 µm - 1 µm
The optoCONTROL 2520 is a compact laser micrometer with integrated controller. A high resolution, model variant with measuring ranges of 46 mm and 95 mm as well as variable mounting distances allow a wide range of applications ...
Measuring range: 40 mm - 40 mm
Resolution: 10 nm - 10 nm
The optoCONTROL 2700 micrometer is used for diameter, gap, edge and segment measurement in industrial production processes, where it delivers extremely accurate results even on transparent measurement objects. It features ...
Measuring range: 2 mm - 30 mm
Resolution: 10 µm - 150 µm
The optoCONTROL 1200 is based on the principle of light quantity measurement. The compact laser micrometer has all the evaluation electronics integrated in the case and the mounting is very flexible. High dynamic applications ...
Measuring range: 10, 28 mm
Resolution: 1, 10, 100, 1,000 µm
Features Easy To Use The position monitor makes it easier to align the optical axis. Easily perform optical axis alignment by adjusting the sensor head so that all of the position monitor lights turn red. Environmental Resistance The ...
Keyence
... Gages can be used in tandem with Sunnen Setting Fixtures for a complete system which eliminates the need for ring gages, micrometers or jo blocks. Gage Specifications Sunnen Dial Bore Gages and Setting Fixtures are ...
... Gages can be used in tandem with Sunnen Setting Fixtures for a complete system which eliminates the need for ring gages, micrometers or jo blocks. FEATURES & BENEFITS Metric/inch conversion .0001 in. (0,001 mm) divisions Preset, ...
Measuring range: 0 mm - 100 mm
Resolution: 0.001 mm
... mechanism (7-9 N) enable more stable measurement. Digimatic Micrometer QuantuMike IP65 Series 293 This is an IP65 micrometer offering movement four times as fast as a standard micrometer. ...
MITUTOYO
Measuring range: 75 mm - 100 mm
Resolution: 0.001 mm
Digital Micrometer Micromar 40 EWRi IP protection category: IP 65 Data interface: Integrated wireless Factory standard Resolution mm/inch 0.001 / .00005" Package contains: instruction manual, battery, setting standard ...
MAHR
Measuring range: 3 in - 4 in
Micrometer Micromar 40 AS For measuring recesses, grooves, etc. Factory standard Graduation value inches: .0001'' Package contains: instruction manual, setting standard (from measuring range 1-2"), case With ...
MAHR
Measuring range: 25 mm - 50 mm
Micrometer with integrated dial comparator Micromar 40 F Factory standard Graduation value µm: 1 µm Package contains: instruction manual, case Operating and display units with satin chrome finish Dial ...
MAHR
Wireless Bore Gauge •10 mm and 6 mm diameter fixing threads (as used on most popular gauge heads). •Inductive Charging •10 hours typical battery life before re-charge The freedom to roam with Solartron’s WiGauge™ brings increased ...
Measuring range: 0 mm - 100 mm
Measuring force - ≤ 10 N Standard - DIN 863 T1 / NF E 11-095 Resolution - 0,01 mm Material - Inserts: tungsten carbide Particular characteristic(s) - With parallax Included in delivery - Measurement report Declaration of conformity
TESA
Measuring range: 0 mm - 300 mm
Micrometers with or without data transmission Measuring force - ≤ 10 N Units - mm / in Standard - DIN 863 T1 Resolution - 0,001 mm / .00005 in Zero - Floating Material - Inserts: tungsten carbide Thread ...
TESA
Measuring range: 0 mm - 30 mm
Resolution: 0.001 mm
Measuring force - ≤ 10 N Units - mm / in Standard - DIN 863 T3 Zero - Floating Material - Inserts: tungsten carbide Thread pitch - 0,5 mm Degree of protection - IP54 IP40 (with opto-RS232) Display - LCD Digit size: 7 mm Power ...
TESA
Measuring range: 0 mm - 80 mm
Resolution: 10, 1, 0.5 µm
Digital micrometer 0800 with non-rotating spindle, 30 mm direct measuring range and protection class IP 65. Technical data • Switchable resolution 10 µm, 1 µm, 0,5 µm / 0,0005“, 0,00005“, 0,00002“ • Spindle pitch ...
Steinmeyer Holding GmbH
Measuring range: 0 mm - 300 mm
Resolution: 1, 2 µm
Precision indicator micrometer with lifting lever and measuring range from 0-25 mm to 275-300 mm with a display range up to ±70 mm or ± 140 mm with 1 or 2 µm resolution. Technical data • error limits according ...
Steinmeyer Holding GmbH
Measuring range: 1 mm - 85 mm
Resolution: 0.5, 1, 10 µm
Digital micrometer 0815 to measure workpieces having odd-numbered slots. Technical data • Switchable resolution 10 µm, 1 µm, 0,5 µm / 0,0005“, 0,00005“, 0,00002“ • Spindle pitch 2,0 mm • spindel type non-rotating • ...
Steinmeyer Holding GmbH
Resolution: 0.001 mm
• Display reads to 0.00005" (0.001 mm) • Zero set for absolute and incremental measuring modes • Auto shut-off after ten minutes • Insulated frame, hardened body, carbide-tipped anvil, positive locking clamp and ratchet stop ...
Measuring range: 2 mm - 270 mm
Easy-to-use, self-indicating and self-centering bore gauge for the measurement of inner- and outer diameter, with highest precision and absolute accurate results. Field of application is the production of high-precision bores within ...
DIATEST
Measuring range: 0 mm - 600 mm
Resolution: 0.0001 in
Starrett manufactures a wide stock range of outside micrometers. This allows our customers to make choices, not compromises. Features •No-glare satin chrome finish which resists rust •Advanced sleeve design with ...
STARRETT
Measuring range: 0 mm - 25 mm
Resolution: 0.001 mm
... the Bowers digital micrometer. This device boasts an impressive accuracy of 2 μm max permissible error and 2 μm max error range. Ergonomically designed to fit comfortably in the hand, the DigiMic is an exceptionally robust ...
Bowers Group
Measuring range: 2 mm - 20 mm
The XTA Micro is a more compact mechanical controller, lighter and more ergonomically designed. The XTA Micro's Vernier scale improves resolution from 5µ to 2µ.. Features • Graduation XTA Micro 2-6mm: 0.001mm, 6-20mm: 0.002mm • Tungsten ...
Bowers Group
Measuring range: 0.08 in - 0.75 in
The XTA Micro is a more compact mechanical controller, lighter and more ergonomically designed. The XTA Micro's Vernier scale improves resolution from 5µ to 2µ. Features • More compact mechanical controller • Lighter and ergonomically ...
Bowers Group
Measuring range: 0 mm - 200 mm
The classical external micrometer is the perfect device for external measurements thanks to the convenient handling and the high accuracy The error limit from your caliper is too high? Check out the external micrometer ...
HELIOS-PREISSER
Automatic wake-up by moving the measuring spindle, sleeping mode after 20 min of no use (system S.I.S.). Position memorized in sleeping mode (system S.I.S.), absolute system. Water protected for heavy-duty work with coolants and lubricants, ...
Alpa Metrology
Works standard Two-point comparative measuring instrument Tilt-preventing measuring sleeve No search for turning point Tungsten carbide-tipped contact points ~1600V Tungsten carbide-tipped gauge pin Measuring range 0.2mm Mounting thread ...
ULTRA PRÄZISION MESSZEUGE
Measuring range: 2 mm - 1,000 mm
Resolution: 0.0001, 0.1, 1, 10 mm
... computerized 3 point internal micrometers adopted to Industry 4.0 Measuring range up to 1000mm (0-40 inch) and with depth up to 3000 mm with 0.1 micron resolution. Main advantage of this precision 3 point internal micrometer ...
MICROTECH
Measuring range: 6 mm - 100 mm
Resolution: 0.001, 0.005 mm
Measuring range: 6 mm - 450 mm
Resolution: 0.001 mm
Measuring range: 6 mm - 450 mm
Resolution: 0.002 mm
Archimede is a digital device engineered for precise computation of huge diameters, the value of which can be accomplished with the help of an angle established by three cylindrical joints. The accuracy of the diameter can shift as per ...
Measuring range: 0.26, 0.66 in
The Optical Micrometer is capable of making non-contact measurements on any surface, curved or flat. This instrument is useful for measuring depth of scratches, fractures, crazing, embedded voids and thickness of transparent ...
Measuring range: 50, 25 mm
Absolute Precision. Absolute Repeatability. Absolute Reliability. The most accurate and repeatable dimensional measurement system to help you produce precision parts fast. • Industry-Leading Gauge – more than 15,000 manufacturing ...
High-Performance, Easy-to-Use, On-Line Direct Thickness Measurement The OptiMike™ OM190 optical micrometer provides precise, shadow thickness measurements of non-metallic sheet and thick film products. • Intelligent, ...
# For quick inside measurement and determination of inside diameters # Spring loaded plunger that expands in the bore or groove # Satin chromed body # With auto extension and direct locking # Measuring faces are hardened and micro-lapped
Moore & Wright
The S_Mike Pro is manufactured by Sylvac, and is a professional micrometer with an automatic wake-up by moving the measuring spindle. It will automatically sleep after 20 min of not using, and has a position memorized ...
SYLVAC
• Anvils : Disk-shaped Ø25mm • Integrated Bluetooth® technology • Automatic wake-up by moving the measuring spindle (System Absolu SIS) • Sleeping mode after 20 min. of no use (System Absolu SIS) • Position memorized in sleeping mode ...
SYLVAC
• Anvils : Ø2mm • Proximity connection, available also with Bluetooth® technology (0-25mm only) • Measuring range 0-25mm / 25-60mm / 60-95mm • Automatic wake-up by moving the measuring spindle (System Absolu SIS) • Sleeping mode after ...
SYLVAC
... above 12.5mm Traceable certificates supplied as standard with all micrometers and setting rings Blind bore measurement from 2 - 6mm and above 12.5mm diameter Micrometer head fitted with a ...
The range includes standard 10 micron versions and high resolution 1 micron ranges and includes a boxed set of four micrometers, with setting pieces, covering the most common 0-4" capacity requirement. Features A ...
Digital outside micrometer with 'easy read' large 7.5mm character height, digital display Features interchangeable universal anvil inserts for different purposes Full set of inserts included, flat, disc, spline, conical, ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining