Other inspection and monitoring equipment

Perfectly documented solder joint quality especially for the inspection of THT-solder joints. System optimized for wave and selective soldering systems Compatible with work piece carriers Modular inspection possible: bottom, top ...

Compact Ballast Water Management System Looking for a ballast water management system that can be installed easily and without relocating other equipment? CompactClean is the answer. DESMI CompactClean system is based on filtration ...

Avoiding assembly errors through optical control: VERSAGUIDE is a system for support and control during PCB assembly or assembly work. This helps to avoid assembly errors and at the same time saves costs for time-consuming rework. • ...

Application: - Allows you to quickly identify LV insulated underground or aerial network cables. - Locates and distinguishes the phases. - Can be used under voltage on any type of LV network. Features: - Box composed of a ...

MultiPanel is a remote monitoring device that can provide a detailed UPS status overview in real time. It is compatible with all Riello UPS and can display values for UPS specific input and output supplies, and battery set measurements. MultiPanel ...

The Elcometer 137 Illuminated (x10) Magnifier is used to establish the level of material’s condition, profile and cleanliness - ideal for close surface inspection. From time to time a closer inspection of a surface is required to ascertain ...

The Elcometer Protective Coating Inspection Kit 4 provides a range of test equipment to help an inspector assess a substrate prior to the application of a coating. Measurement parameters include: • - Surface inspection • - Weld inspection • ...

The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. The kit provides all the tools required for the on-site inspection of ...

BD700 Laserscale interface electronic 2-Channel interpolator with USB interface and BISS-C Interpolation factor: 65,536 times Inputs: 2 channel Compatibility: available for BS78, BH25, BH20, BL57, BL50H models (please contacts ...

Laserscale interface electronic 2-channel interpolator Compatible: BS78, BH25, BL57 models Interpolation: up to 4,000 times Interface: 40 bit binary interface Max. response speed: 400mm/s with BS78, 700mm/s with BH25, 1,100mm/s ...

Material: PP with metal particles Colour: metal blue Operating temperatures: -20 to +70°C Chemical resistance: good resistance to acids, bases and detergents. Specifications: halogen free adapted to the success of a HACCP* processes. Application: ...

Applications: system for the identification of cables in the field of lighting, light signals and various other installations of outdoor space supplied at low or high voltage. Composition of the PLIOSTRAP-8* identification system: - ...

With the HELAVIA LASER-ONE range of products, we offer LASER engraved rubber rings for indelebile and unalterable cable marking. These products made of polychloroprene, meet the vast majority of applications by combining a number of ...

UWB Tag Specifications Ranging accuracy: 10cm Dimensions: 78×60×21 mm Charge/Power Interface: pogo pin-4 Charging time: ≤ 2h Maximum battery life: ≥14 hours Battery type: lithium polymer battery Battery level: 1000mAh Working ...

Bracelet specifications Ranging accuracy: 10cm Dimensions: 52×52×20 mm Charge/Power Interface: pogo pin-4 Charging time: ≤ 2h Maximum battery life: ≥11 hours Battery type: lithium polymer battery Battery level: 800mAh Working ...

hen projecting a light, laser or sensor signal on to a specific surface, you may need a flexible holding arm that allows an easy and quick positioning of such optical devices. The 3D articulated arms from Fisso allow an individual ...

Product introduction: The helium concentration detector is suitable for the detection of various helium gas concentrations in various industrial environments and special environments. The instrument adopts imported electrochemical/infrared ...

The 4-Quadrant Power amplifier monitor unit is an optional unit of the PAV series of 4-quadrant amplifiers, which can be assembled into the cabinet. The 4-quadrant amplifier can be started, output, and stopped by the hardware of each ...

Optical sensor based on absorptiometry technology Ranges of measurmentMES5 Suspended solids: 0-50 g/lVB5 Sludge blanket: 0-100%Turbidity: 0-400 FAU Temperature measurment: -5°C à +60°C Rugged and compact body made in DELRIN Modbus Communication ...

INSTRUMENT FOR ULTRASONIC PULSE VELOCITY AND SONIC TESTS WITH INSTRUMENTED HAMMER SONIC15 is a device for non Destructive Tests with ultrasonic pulse velocity and sonic tests on masonry through instrumented hammer. In spite of compact ...

The NetMaster Industrial Network Management System software is designed for discovering, configuring, real-time monitoring, and diagnosing network devices, physical links and network topology in mission-critical industrial plant networks. ...

Portable Dust Detector ZWIN-YCM06 is our company’s newly launched active particle detector, a highly integrated portable one. Its main characteristics as follows: highly accurate, small in size, light weight, easy to use and adaptable ...

194DR designed as a extend product line for the 194 series panel mounting multifunction meter. With 1.6'' dot matrix LCD screen, full display of characters in various languages (default English). The 35mm Din-rail mounting design suitable ...

19D-XN Modular multi-function meter is Blue Jay next generation din-rail meter power meter. Flexible modular design products can expand max 64 channels metering point, pluse 16 point I/O port for on-site control. Optional 100mA or 333mV ...

DCEM multi-channel DC monitoring system is a device used for metering 4 channels of DC electrical parameters. It can visually display voltage current power data and energy cumulative data in one device. In the front panel keypad it ...

The APOLLO Is a highly and advance cellular low power data logger designed to monitor and control water networks, flow meter, fire hydrants, pressure sensors, water hammers and open\close valves from remote locations. Equip with four ...

Compatible with external probe, Not included Integrated USB connector available, no cable required for communication Multiple alarm ranges enhances control and transparency LCD screen Compact in size and easy-to-use Mark button for ...

Data loggers are tools that record and store data continuously or at regular intervals over time. They can be used to monitor and record parameters such as temperature, humidity, pressure, wind speed and many others. Portable data loggers ...