- Metrology - Laboratory >
- Inspection and Monitoring >
- Other inspection and monitoring equipment
Other inspection and monitoring equipment
Visual operator guidance with touchless activation for fast and reliable picking and fulfillment applications. Provides optical sensing and intuitive indication in one device No controller needed—devices are completely self-contained Resistant ...
Compared with the R500, R550 is a more professional light Android-Based data collector for field surveying and data collection. Features 1. Android 8.1 Operating System 2. MIL-STD 810 G and IP67 Certified 3. 5" Sunlight Readable ...
With IP68 Certified design, Long Battery Life and Powered by Android Operating System, the R500 ensures you work smarter and faster at your fingertips. Features 1. Online customer service 2. Android 6.0 Operating System 3. MIL-STD ...
R200 is an industrial handheld, integrated GNSS controller, With a 3.7 inch sunlight readable display and sensitive touch screen, combined with numeric and programmable keypad, the R200 meets your toughest surveying demands. Features 1. ...
• M18x1 mm photoelectric sensors. • 100 mm background suppression without adjustment. • PNP/NPN digital output, with programmable LO (Light Operate) or DO (Dark Operate) pulse logic. • Built-in LED indicator. • M12, 4 pin connector ...
•Miniaturized photo-electric cubic sensors with background suppression. •High-intensity red emission. •Mechanical sensitivity adjustment via a trimmer. •PNP or NPN logic output. •NO/NC selectable output. •Output with M8 4-pin connector.
Operating principle - Reference teach on background Operating range - 0.05 ... 0.2 m Adjustment range - 50 ... 200 mm Light source - LED, Red Protective circuit - Polarity reversal protection Short circuit protected Supply ...
Application - Detection of high-gloss or polished surfaces Detection of transparent objects Special version - V-optics Wash-Down design Black-white error - < 10% up to 100 mm Operating range, white 90% - 0.015 ... 0.15 m Operating ...
Operating principle - Distance diffuse sensor with background suppression Type of scanning system - Special version - 2 independent switching outputs Measurement value output Small light spot (S) Wash-Down design Black-white ...
Flexible white-light scanning for multiple surface finishes The HP-OW sensor uses chromatic white-light spectroscopy to take highly accurate measurements on varied surface finishes across a wide array of applications. The sensor ...
HP-C-VE - Optical Probe - Bringing vision to your CMM HP-C-VE is a camera for use on a CMM. The 2D light sensitive CCD and the integral LED illumination allow an area of the measured component to be illuminated and viewed. This gives ...
The TTL laser and the image-processing vision sensor share one and the same optical path ("Through-The-Lens"). This coaxial principle allows seamless switching between camera and laser. As this concept does not involve an offset between ...
Designed for use with any charged-beam instrument, Mag-NetX is an innovative active control system for the compensation of magnetic field fluctuations. With a proprietary analog controller with digital interface to the user, Mag-NetX ...
K7TM-A2 monitors the degradation of electrical heaters, avoiding costly unplanned downtime due to heaters’ failure and allowing to plan their replacement before their degradation negatively impact the quality of products and process. ...
Foreign body detector for qualitiy control of packed goods using X-Ray technology • Easy installation and handling, easy maintenance -> Easy way of X-Ray! • Detects metal, glas, stone, plastic and other foreign bodies • Sophisticated ...
•Compact all-in-one system •Multifunctional by combining various label inspections •High reliability thanks to robust deep-learning-based algorithms •Easy set-up and configuration via web interface •Flexible optical design and high-power ...
The NGRM-ENC Enclosed Neutral-Grounding-Resistor (NGR) Monitor series is a Type 4X enclosure housing a Littelfuse Startco SE-325 or SE-330 Neutral-Grounding-Resistor Monitor and optional accessories that include a 480/600-V control power ...
• Wireless technology supporting 4G/3G and 2G technology • Dual SIM cards • Built-in GPS • Internal and external antenna • TLS 1.3 security measures: authentication between Data logger and server/software platform with a certificate ...
Schneider Electric
Digital suspended solids sensor with ultrasonic cleaning, connectable to the IQ SENSOR NET ViSolid®: Optical sensors for the in-situ use to measure suspended solids via scattered light and direct back-scattering with ultrasonic cleaning ...
Memory capacity: 32,000 unit
DataLoggerXP is an optional data logging mode for the XP2i gauge. With the XP2i's long battery life, and Ultra Low Power mode, you can log data over an entire year, without the need for external power supplies or battery replacements. ...
Eliminate waste, control cost, and create higher quality parts MVP’s catalyst alarm will signal if the catalyst pump fails to deliver a full portion of catalyst to the gun, ensuring an accurate mix ratio every time. This product is certified ...
The CB-6000 Materials Monitor is easily adjusted for your materials by entering fiberglass yield (metric or pounds), and resin specific gravity. The built-in microprocessor will compute the proper formula to convert input information ...
The Cat Sense is a unique, safe, pneumatically powered catalyst flow alarm system, with no electrical or batteries needed. It is designed for use on any MVP meter/mix system, and is quick and simple to install. Cat Sense comes with everything ...
Pulse count up to 1024 A, B, Z channels, TTL or RS 422 outputs Quick and simple assembly Cost efficient feedback solution Can easily be upgraded to the absolute multiturn kit Direct replacement for the Avago HEDS/HEDM 5500-5600 Series
Gas density is a crucial operating parameter for high-voltage switchgear. If the required gas density is not present, safe operation of the plant cannot be guaranteed. The gas density measuring instruments from WIKA warn reliably against ...
WIKA Alexander Wiegand SE & Co. KG
Applications Medium and high-voltage instruments Monitoring of the density of SF6 gas in closed tanks Raising an alarm when defined limit values have been reachedSpecial Features Case and wetted parts from stainless steel ...
WIKA Alexander Wiegand SE & Co. KG
Gas density is a crucial operating parameter for high-voltage switchgears. If the required gas density is not present, safe operation of the plant cannot be guaranteed. The WIKA gas density measuring instruments provide reliable warnings ...
WIKA Alexander Wiegand SE & Co. KG
FEATURES INCLUDE: Standard and custom-engineered systems Heat-resistant camera package with air, water, and oxygen cooling options Selectable lens angle and field of view pattern options Includes video cassette recorder and monitor Retraction ...
The BOX Data Logger NZ2DL is a standalone solution that allows data logging to a CF card. For more advanced applications the collected data can be forwarded to file servers or send by e-mail. This BOX Data Logger NZ2DL is a standalone ...
Element Multiphase test connector Type of hood/housing Cable to cable housing Gender Male Size 10 B Number of contacts 10 Locking type Single locking lever Han-Easy Lock ® Yes Rated voltage conductor-earth 230 V Rated ...
Imagine uniting easy, intuitive field data collection with the power of high-accuracy GNSS positioning in a single, streamlined application. One solution for every step in your workflow. Whether it's time to modernize your existing data ...
Filter cartridge monitoring with the B-TIMER is easy, reliable and cost-effective! The B-TIMER can only be relied upon to operate correctly when used in BAUER compressor systems and with original BAUER filter systems and cartridges. The ...
BAUER KOMPRESSOREN GmbH
The Chromatic Focus Line sensor uses a linear arrangement of lots of chromatic sensors to capture measured values extremely quickly with up to one million measurement points in less than three seconds. The chromatic measurement principle ...
NivuLevel Mobile is a self-sufficient system with well-thought-out power management for reliable level measurements, data logging and convenient data transmission. NivuLevel Mobile is a self-sufficient system for reliable level measurements, ...
NivuLink Micro II is a self-sufficient gateway for the storage and automatic transmission of plant and measurement data NivuLink Micro II is a self-sufficient gateway for the storage and automatic transmission of measurement data. ...
Memory capacity: 3,200,000 unit
The ideal solution for monitoring environmental factors Using the two internal sensors of this data logger, simultaneously air temperature, dew point and relative as well as absolute humidity can be measured and recorded. That is ...
Memory capacity: 3,200,000 unit
Monitoring of indoor air quality As well as offering all sensor functionality and equipment of the DL200H, the DL200L also provides an additional NDIR sensor for detecting concentrations of CO₂ in the room air. For long term logging ...
PBM Protection, Control and Monitoring System Motor Management System INTEGRAL SOLUTION FOR MCCs ADAPTABLE TO EVERY CUSTOMER NEEDS MULTIFUNCTION FAULT REPORTS 4 fault reports with the following information: dates, measurements, status ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining