... Overview
Featuring the patented nextSTEP™ rotor/stator mounted at the bottom of the cell, these forced-air flotation cells deliver a more stable froth surface and deeper froth layer to enhance mineral recovery and separation efficiency. The ...
Power: 0.12 kW - 22 kW
Operating temperature: -30 °C - 40 °C
... Super premium efficiency MG motors that match the pump load MG/ML standard motors sold together with our pumps set the standard for energy efficiency, offering premium efficiency designed to match the pump load. Why you should select a Grundfos pump ...
GRUNDFOS
Power: 0 W
... Description Powerful torque motor with absolute encoder and electric and pneumatic rotary feed-through Field of application For all applications with exceptional requirements in terms of achievable repeatability, rotary speed, acceleration and tool ...
Torque: 2.5 Nm - 50 Nm
Rotational speed: 3,300 rpm - 6,000 rpm
... Expanded possibilities ABB is offering standardized motor unit packages complete with cablings, serial measurement board (SMB) box and safety options. The portfolio of six different motor units between 2.5-50 Nm max dynamic torque offers vast possibilities ...
Power: 5.5 kW
With a width of just 30 mm you get a compact, powerful motor starter – with five setting ranges up to 5.5 kW. It is part of the SIMATIC ET 200SP distributed I/O system and is available in both standard and safety versions. When starting single-phase and ...
Power: 2,000 kW - 15,000 kW
Rotational speed: 0 rpm - 2,000 rpm
... Overview
- INDAR PMM (Permanent Magnet Motor) high-speed design
- Rated speed: up to 2,000 rpm
- Power range: 2–15 MW
Applications
- Large industrial drives and power generation
- Variable-speed
Ingeteam GmbH
Power: 1.1 kW
Rotational speed: 3,000 rpm - 12,000 rpm
Diameter: 25 mm - 70 mm
... Overview
The VPA-D is an electric motor designed to drive pendular poker vibrators (TNR-D) on construction sites. Three-phase versions include a clutch; motors are double insulated and available in single- and three-phase configurations.
ANR/TNR ...
ENAR
Torque: 0.6, 2.5 Nm
... The new Camozzi motors Series MTS have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes. The new Series MTS electrical Stepper ...
CAMOZZI AUTOMATION
... Since 1995, ARO has been successfully involved in the concept, design and manufacture of servomotors for resistance welding applications. The results are conclusive: •For application up to 20kN force •Maintenance intervals of our most recent 8-pole ...
... Overview
- Compact servo-driven invert and takeout system for precise parison transfer on blow-moulding machines
- Programmable movement profiles per section and extendable across the whole machine
- Designed for retrofit to
... Overview
- Product: Kitagawa Quinte QTC100 — standard 4th-axis controller for CNC rotary table and axis control
- Single-axis control with high-resolution color display and real-time monitoring
- Interfaces: EtherCAT, external
Power: 0.52 kW - 21.3 kW
Torque: 1.5 Nm - 157 Nm
Rotational speed: 0 rpm - 5,000 rpm
The MPP (MaxPlusPlus) Series is an industry leading high performance servo motor. Utilizing eight-pole segmented lamination technology, along with high grade neodymium magnets, the MPP produces more torque in a shorter package to save space, weight and ...
... Utilising an extensive and proven product range, HepcoMotion provides standard and bespoke system solutions and motion control to suit a wide range of automation requirements. Systems of all shapes and sizes – Utilising HepcoMotion’s extensive product ...
Power: 0.37 W - 2.2 W
Operating temperature: 0 °C - 30 °C
... Canned Motor 4PN(D) Model:4PN(D) The following is about Canned Motor 4PND related 4PND, I hope to help you better understand Canned Motor 4PND. Product Description Canned Motor 4PN(D) Application These motors are appropriate for 4” or larger ...
Current: 28 A - 1,000 A
Power: 14 kW - 500 kW
XJ01E series motor soft-starter cabinet,is adopting Thyristor AC voltageregualation technology to realize starting and stoping of AC induction motor.Start and stop means that device output voltage raises from 0 up to fullvoltage,and accordingly rasing ...
PEOPLE ELE. APPLIANCE GROUP CO., LTD.
... 【Main Feature】 FBL80 linear guide, fully sealed structure, body width 80 mm, it is designed for dust proof usage in hard environment, avoid dust or miscellaneous debris fall into body structure to affect working,large stretch,small compression,hard object ...
Power: 200 W - 1,000 W
Rotational speed: 3,000 rpm
... 3000rpm AC Servo Motor with Brake 3000mm Power Lines Optional Encoder Lines 60/80 magnetic braided AC servo motor 17-bit single-turn absolute encoder Air Circuit Breaker It is used to protect the power line and cut off the circuit when an overcurrent ...
Power: 0.15 kW - 4 kW
NEFF’s standard three-phase motors offer a reliable and high-performance drive solution for industrial applications and integration with mechanical motion systems. They enable the efficient operation of machines, systems, and electromechanical positioning ...
Power: 475 W
Intensity: 1.8 A
Torque: 75 Nm
... TORQUE MOTOR iTM 240 -Energy efficient due to low losses✓ -Completely ready for use in a ready-to-install housing✓ -Hollow shafts for feed through✓ FEATURES: -Energy-efficient due to low losses -Completely ready for use in a ready-to-assemble ...
isel Germany
Torque: 0.34 Nm
Rotational speed: 3,000 rpm - 28,000 rpm
... FEATURES • - robust 2-pole AC motor (asynchronous motor) • - square shape • - Protection class IP54, insulation class F • - M23 plug connection • - A side: aluminium extrusion / B side: cast iron end shield • - motor shaft to take ER 16 collets • ...
isel Germany
Power: 900 W
Torque: 0.37 Nm
Rotational speed: 6,000 rpm - 24,000 rpm
... iSA 900W | Spindle motor with automatic tool exchange Features • - robust 2-pole AC motor (asynchronous motor) • - square shape • - protection class IP55, insulation class F • - M23 plug connection • - cast end shield A and B sides • - tool ...
isel Germany
... KLIXON® SP Refrigeration Package is a compact motor starter and motor protector package. The SP serves as a combination control which: 1. Uses industry leading 4TM motor protector 2. Performs the PTC solid state starter function 3. Replaces ...
Sensata Technologies
Frameless motor part set design from BEI Kimco allows for the motor to be fully integrated within the customer assembly resulting in the highest ratio of torque to volume. In this configuration the motor’s rotor and stator are housed within the customer’s ...
Sensata Technologies
This compact, 1.5” diameter HPHT Brushless DC motor from BEI Kimco is ideal for down-hole applications, such as mud pulser valves. This rugged motor from BEI Kimco has been tested for operation up to 400°F (205°C) and pressures up to 30,000 PSI (2070 ...
Sensata Technologies
Power: 100 W
Torque: 1.5, 2, 6.2 Nm
Rotational speed: 800, 625, 200 rpm
... Overview
The SM137 is a compact smart motor designed and manufactured by HSD for precision machining and drive integration in industrial applications. The series maintains a constant 40 x 60 mm mechanical envelope while offering multiple output ...
Power: 0.35 kW - 0.45 kW
Torque: 1.11 Nm - 1.43 Nm
Rotational speed: 5,000 rpm
... Overview
HSD-designed SM141 smart motors for industrial machining of metals and other materials. Available in two power variants to suit compact machining equipment where fieldbus integration and optional braking are required.
Compatible ...
Starting from the MD-CX magnetic drive range Simaco has decided to introduce alongside the asynchronous motors with a very competitive alternative for performance, energy saving, interconnection, dimensions: the Permanent Magnet Synchronous Motors (PMSM). ...
Power: 19 W
Torque: 0.057 Nm
Rotational speed: 3,100 rpm
... Rated Torque 5.7 Ncm No load speed 3800 rpm Weight 490 g Motor Length 80 mm ...
Power: 62 W
Torque: 50 Nm
Rotational speed: 4,000 rpm
Rated Speed 4000 rpm Rated Torque 15 Ncm No load speed 5200 rpm Weight 700 g Motor Length 85 mm Output Power 62 W
Power: 19 W
Torque: 80 Nm
Rotational speed: 3,800 rpm
Rated Speed 3100 rpm Rated Torque 5.7 Ncm No load speed 3800 rpm Weight 490 g Motor Length 80 mm Output Power 19 W
Rotational speed: 125 rpm
... The ViscoPro-Cm is a brushless servo motor for the drive of the ViscoTec dispenser 3RD4-EC, including a high intelligent drive concept. In combination with the 3RD4-EC dispenser a perfect alternative to valves. Your advantages: - weight with ViscoTec ...
Rotational speed: 125 rpm
... The ViscoPro-Cg is a brushless servo motor for the drive of the ViscoTec dispenser series RD-EC: 3VMP15, 3VMP18 and 3VMP22, including a high intelligent drive concept. In combination with one of those dispensers a perfect alternative to valves. Your ...
Torque: 0.2 Nm - 45 Nm
... Category: AUTOMATIC ASSEMBLY MACHINE / Screw Driving motors Product: NX DRIVER (SD600T series) Catchphrase: AC Servo Screw Driving motor with Torque Sensor Description: SD600T series AC Servo Screw Driving motor with Torque Sensor NX Driver. New High ...