As coiled tubing runs in and out of the well, stripper packer can effectively pack-off on coiled tubing to prevent overflow of oil, gas, water and other fluids, avoiding natural resource waste and environmental pollution. It is an important well control ...
Diameter: 0.13 in - 2 in
... Gas - NPT adapters These adapters allow using NPT threaded fittings on vacuum components with NPT threading, such as vacuum components like vacuum cup supports, valves and solenoid valves, filters etc. with gas threading. ...
Diameter: 0.25, 0.38, 12, 10, 8 in
Length: 14 mm - 48 mm
... Adapters These standard accessories offer the user different assembly options. The galvanised steel or brass adapters screwed onto the standard vacuum cup support connections can vary the threads from gas to metric or vice-versa, from male to female ...
Diameter: 41 mm
... Polypropylene barrel adapter (PP and PVDF pump tube) fix the barrel pump in the cap hole of a drum, pump tube diameter 41 mm, G 2". ...
Diameter: 41 mm
... Stainless steel barrel adapter For secure attachment of the drum pump in the drum cap hole, pump tube diameter 41 mm, G 2”. ...
Diameter: 41 mm
... Emissions-proof drum adapter For pump hose with 41 mm diameter. FKM seals prevent the emission of harmful gases and vapors from the drum. The vacuum in the drum is equalized by a valve. Made of polypropylene, brass, 316 stainless steel. ...
... Anti-vandalism closure of groundwater monitoring wells from 1.5"- 6" pipe diameter Special alloy of cast aluminum for high corrosion and weather resistance even in frost Available in two closure variants (normal / safety lock) Sealing insert for flood-prone ...
... Pressure-tight closure of temporary or permanent artesian groundwater monitoring wells Robust housing: The Artesian Cap consists of a high-quality stainless-steel head (V4A) with internal Whitworth pipe threads, which reliably and permanently protect ...
... Application - Adapter / connection element Additional information - Further adapter types on request. Connector - Side 1: BNC male connector - Side 2: Microdot female connector 10-32 UNF Configuration example - Item no.: C020-170-999-000-139 - SAB ...
Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container ...
... Key features
- Subsequent installation thanks to openable clamping lever
- Proven Hoffmann design ensures reliable flow stop
- Suitable for a wide range of hose sizes
- Ideal for laboratory, technical and industrial
Diameter: 6 mm - 76.1 mm
Clamp fittings DIN 3015-1 light series with ribbed inner face, compressing are designed for secure and stable mounting of pipes and tubes. These fittings are part of the flexible standard component system and are suitable for applications requiring vibration ...
... Column bases single Material: Aluminium EN AW-6060 Version: Black anodized Note: Single base for holding columns in four different sizes. Machined contact faces with mounting and centring holes guarantee precise mounting of elements. Drawing reference: position ...
... ROLLER HS, this device is essential for supporting the pipes while they are being welded with the butt fusion machines. The rollers minimise pipe friction and drag force no matter which is the construction site condition. Special design for ALL TERRAIN ...
... EASY TO USE VERSATILE UP TO Ø 400 mm; 1.5" ÷ 15,7" With this practical piece of equipment, the pipe can be locked to let the operator carry out quickly and with precision all operations previous to the welding cycle, like cutting, pickling, scraping, ...
Diameter: 78 mm
... The adapter element is used to reduce the intermediate element size K10 to the hydraulic clamping module K5. Workpieces or fixtures can be clamped with repeat accuracy directly onto the hydraulic clamping module K5 via clamping nipples. This clamping ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Diameter: 78 mm
... Adapter for clamping module, mechanical Tempered steel, plasma-nitrided and burnished. Adapter for installation of the mechanical clamping module 6212M size K20 (559094) to an intermediate or base element size K10. The adapter can be aligned ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Pressure: 60 bar
Flow rate: 400 l/min
... Compact, air-pressure-operated pressure intensifier for single-acting hydraulic circuits. With pneumatic control unit for the hydraulic output pressure, pressure gauge and fill level indicator. The pressure intensifier is used for opening for hydraulic ...
ANDREAS MAIER GmbH & Co. KG (AMF)
... Product name
Elbow fitting, side — connection: 2 x G 1/8" female; includes T-slot nuts; internal reference GK.11.010
Short description
- Elbow fitting for side-wise connection of pipes, hoses or mating components
- Connection
Morali GmbH
... Short description
Side-mounted angle fitting, connection: 2 x G 1/8" internal thread (IG). Supplied with T-slot nuts.
Product details
- Designation: Side-mounted angle fitting
- Connection: 2 x G 1/8" internal thread
Morali GmbH
... Product name
- Rigid elbow fitting GK.11.017
Short description
- Connection: 1 x G 1/8" internal thread (female)
- Length: 45 mm
- Delivered without T-nuts
Additional information
- Weight:
Morali GmbH
Diameter: 57.5, 71.5 mm
... Inserts consisting of aluminuim alloy for STIRRING DRYBATH 15-100 and STIRRING DRYBATH 15-250. For reduction of the bore hole diameter. Guarantees an excellent heat transfer in the case of using smaller glasses. Technical data Outer diameter (ØxL) ...
... Diamondback hose bridge systems provide customizable protection for valuable cable and hose lines. Product Features Single or multiple tunnel systems available Reduces maintenance and replacement costs Multiple sizes for various hose ...
... Product Overview: MIPEX Calibration Adapters are engineered to accommodate different sensor designs, providing a reliable interface with calibration and testing equipment. Universal models are compatible with the CTL-4 form factor, making them ideal for ...
DN: 50 mm - 600 mm
... Description
GRP elbow 90° for KK cable tray, small radius, with unperforated side rails and moulded connector. Pressed glass-fibre reinforced polyester, RAL 7032 (pebble grey). Designed for industrial cable routing where compact bends and non-perforated ...
The CP-ILED-B-IS-1.0-HL is a measurement adapter for Averaged LED Intensity following to CIE 127 B regulation. Its design is based on an integrating sphere for best possible uniformity of the measurement area. The adapter can be plugged on every Gigahertz-Optik ...
... 14 Ton Industrial Hydraulic Flange Spreader, 10,000 PSI, 0.24 Tip Clearance, includes safety support block. Material Steel Capacity 14 ton Effective area (push) 2.24 in2 Type Manual Oil capacity 4.48 in3 Weight 22.2 lbs Tip ...
... 1/2 Ton Heavy Duty Hydraulic Spreader, 10,000 psi, 3/8"-18NPTF, 0.51 tip clearance, low profile makes for easy use in hard-to-reach spaces, positive over travel stops and return spring. Material Steel Capacity 0.5 ton Effective area (push) 1.22 ...
... 1 Ton Heavy Duty Hydraulic Spreader, 10,000 psi, 3/8"-18NPTF, 0.47 tip clearance, low profile makes for easy use in hard-to-reach spaces, positive over travel stops and return spring. Material Steel Capacity 1 ton Effective area (push) 1.09 ...
... The GLOBE air amplifier systems is the solution for extra pressure in your compressed air system. Simply put, an air amplifier will increase locally the air pressure for different applications. For example: air tools, valve actuators, tire filling etc. We ...
Our double-acting air amplifiers are designed for applications where constant and efficient pressure boosting is required. Thanks to the double-acting design, these boosters deliver an even airflow and a higher output capacity than single-acting variants. ...
... High Pressure Equipment Company offers an extensive selection of accessory components to enable you to completely plumb a fluid system. These accessories allow you to move from tube to tube, tube to pipe, facilitate system pressure changes and monitor ...
... Optical glass cuvette for color measurements. Choose a cuvette adapter for rectangular cuvettes from 10 mm width, 10 mm length up to 10 mm width to 10 mm length. For cuvettes longer than 20 mm, please order two adapters. Checkpoints Fits ...
... Short description
MQS connector, 6-pin, PBT GF15 housing, with individual wires 0.5 mm², PVC cable 6 x 0.5 mm², length 1 m, open end.
Tags
- RSA
- RFE
- RSK
Variants
item number | ...
... Application : Insulating adaptor, with 1/4'' hexagonal male fitting and 3/8'' drive square. For use with screwing standard hand machine. Features : Operating voltage up to 1 000 V AC - 1 500 V DC. In accordance with IEC 60900 ...
... Application : Insulated enlarger for live working at low voltage Features : Insulated orange hardened PVC Maximum operating voltages: 1 000 V AC - 1 500 V DC ...
Diameter: 12, 14, 20 mm
Length: 23.4 mm - 41.4 mm
... Metal accessories to adapt the pressure gauge thread to the installation. Metric, BSP, or NPT connections. Made of brass or stainless steel. Include O-rings or tapered seals for leak prevention. Ideal for pressure systems. Applications: Perfect for ...
... The coil allows safe placement of pressure gauges in systems at very high pressures and ensure proper operation. The damping coil is connected through the installation male thread; the gauge is connected via the coil's swivel female nut. Connection ...
... Pre-assembled fabric-reinforced PVC hose designed as a ready-made 10 m connection between vacuum testing bells and the Picolino vacuum pump. Equipped with a bayonet coupling and a quick coupling for fast connection and disconnection.
Key features
- Material:
... POP-LOCK Workshop „hose retention system“ and Pop-Lock Kit for mobile application. Hose assemblies must be designed in such a way that in case of failure, hazards caused by whipping of the hose assembly can be avoided with suitable protective measures. UNIFLEX ...
Length: 80 mm - 218 mm
... REDUCING SLEEVES PRECISION VERSION DIN 2185 APPLICATION for tools with morse taper Reducing sleeves Precision version DIN 2185, External taper MT 1, Internal taper MT 0External taper MT 2, Internal taper MT 1 External taper MT 3, Internal taper ...
... Conveyor lines made of V2A stainless steel with bends made of special glass for deflections during material transport We design the material-carrying pipes for you from aluminium or high-quality V2A stainless steel. The internal diameters are 40, 50, ...