Pipe and hose accessories

Column bases single Material: Aluminium EN AW-6060 Version: Black anodized Note: Single base for holding columns in four different sizes. Machined contact faces with mounting and centring holes guarantee precise mounting of elements. Drawing ...

UNI lock 5-axis reducer adapter system size 138 mm Material: Steel. Version: Main body oxidised. Contact faces case-hardened and ground. Note: The UNI lock 5-axis reducer adapters are used to convert from size 80 to size 138. They ...

CPF Fittings and Hose are a new line of quick-test pressure fittings for calibration and test applications -- designed with an emphasis on safety. Crystal Pressure Fittings (CPF) perform up to 15 000 psi / 1000 bar, and feature a safety ...

Hose diameter: 32 mm - 118 mm
Width: 59 mm - 156 mm

U-bolt clamps Ideally suited for mounting exhaust systems and in many other applications. Pre-treated with white galvanizing, both the collar and u-bolt versions are available in a wide range of diameters.

Hose diameter: 42 mm - 150 mm
Width: 25 mm - 30 mm

Collar clamps Ideally suited for mounting exhaust systems and in many other applications. Pre-treated with white galvanizing, both the collar and u-bolt versions are available in a wide range of diameters.

The A 1507 3-Phase Active Switch is an accessory intended for automating the process of electrical safety testing of three phase circuits. KEY FEATURES • Banana socket outputs for connection to a 3-phase system • Motor driven through ...

Length: 80 mm - 218 mm

REDUCING SLEEVES PRECISION VERSION DIN 2185 APPLICATION for tools with morse taper

1,5'' Stainless steel set for PETRO-PIT® to fixing on retention tank Specific stainless steel parts for PETRO-PIT® to assemble a filtration set on a metallic retention tank. Kit containing: 1 stainless steel pass-through M/M ...

The fire trap is an additional element of the GreCon Spark Extinguishing System. In case of an alarm, the fire trap closes a transport duct mechanically. Specifications Area of application: negative and positive pressure ducts, ...

Conveyor lines made of V2A stainless steel with bends made of special glass for deflections during material transport We design the material-carrying pipes for you from aluminium or high-quality V2A stainless steel. The internal diameters ...

CONSTRUCTION OF GAS PIPING SYSTEMS Integrated pressure monitoring for leak control Special features Complete realisation, ranging from the design to the commissioning Piping systems can be realized in various materials, e.g. in ...

BLANKING DISKS For isolating pipes For assembly between tongue and groove part For all types and pressure ranges Available bored out for flow restriction Range of application from -270 °C up to +650 °C dependent on the material used

The GLOBE air amplifier systems is the solution for extra pressure in your compressed air system. Simply put, an air amplifier will increase locally the air pressure for different applications. For example: air tools, valve actuators, ...

GLOBE air amplifiers (also called air pressure boosters, air pressure doublers or pneumatic boosters) are oil free, air driven boosters. Available in single acting and double acting versions with different ratio's. The air amplifiers, ...

Diameter: 78 mm

The adapter element is used to reduce the intermediate element size K10 to the hydraulic clamping module K5. Workpieces or fixtures can be clamped with repeat accuracy directly onto the hydraulic clamping module K5 via clamping nipples. This ...

Diameter: 78 mm

Adapter for clamping module, mechanical Tempered steel, plasma-nitrided and burnished. Adapter for installation of the mechanical clamping module 6212M size K20 (559094) to an intermediate or base element size K10. The adapter ...

Pressure: 60 bar
Flow rate: 400 l/min

Compact, air-pressure-operated pressure intensifier for single-acting hydraulic circuits. With pneumatic control unit for the hydraulic output pressure, pressure gauge and fill level indicator. The pressure intensifier is used for ...

DIAMONDBACK® HOSE BRIDGE provides protection for valuable cable and hose lines whilst ensuring a safer method of passage for vehicles. They replace wooden and metal fabricated ramps and can be used to protect lines up to 11.4 cm in diameter. ...

► Spe­cial fea­tures With choice of fe­male or male threads Avail­able with in­te­grated vac­uum gen­er­a­tor

► Spe­cial fea­tures Very strong ma­te­r­ial com­bi­na­tion Mount­ing jointed on all sides for suc­tion grip­pers and suc­tion plates

Available for M08-M36 for normal and long stroke If the industrial shock absorber is actuated with a higher angle of impact than the permissible misalignment of 2°, then a side load adapter must be provided. This increases the permissible ...

Insulating adaptor Application : Insulating adaptor, with 1/4 hexagonal male fitting and 3/8 drive square. For use with screwing standard hand machine. Features : Operating voltage up to 1000 V AC - 1500 V DC. In ...

Length: 54, 75 mm

Application : Insulated enlarger for live working at low voltage Features : - Insulated orange hardened PVC - Maximum operating voltages: 1 000 V AC - 1 500 V DC

This adapter allows you to use the Riello UPS communication cards via an RS232 port. Is the optimal solution for use with legacy UPS without a slot or for use with UPS equipped with only one expansion slot. Powered box with RS 232 port and slot

Drinking water steel pipe adapter with external thread Material - Brass blank Max. operating pressure - 10 bar Max. operating temperature drinking water - 95 °C Max. operating temperature heating - 120 °C Registration ...

Steel pipe adapter with Eurocone internal thread Material - Nickel-plated brass Max. operating pressure - 10 bar Max. operating temperature heating - 120 °C

Steel pipe adapter with Eurocone external thread Material - Nickel-plated brass Max. operating pressure - 10 bar Max. operating temperature heating - 120 °C

Length: 91, 105 mm

Most AvaSpec spectrometers are USB powered, but some users prefer to power their instrument externally. Avantes PS-12V and PS-24V can be used to connect your AvaSpec spectrometer and AvaLight light sources to any 100-240V power connection. The ...

Elcometer’s blast hose assemblies come complete with a blast hose, a twinline remote control hose, a DMH II deadman’s handle, a nozzle holder and a quick coupling. Available with a working pressure of either 12 or 15bar (174 or 217psi) ...

Elcometer’s compressed air bull hose assemblies include couplings on both ends (either 2 claw or nut & tail), a bolt clamp (with either two or four bolts) and sealing gaskets - everything you need to get our air distribution manifold ...

• For clamping covering cloth •Integrated contacts made of rubber • With opening spring, inside • Fully insulated to avoid short circuits