RAEM1-6 multi-channel detector was developed based on acoustic wave( acoustic emission) technology and Linux system, combined with SWAE software, it could effectively carry out acoustic emission nondestructive testing for most of the ...
RAEM1 detector was developed based on acoustic wave( acoustic emission) technology and Linux system, combined with SWAE software, it could effectively carry out acoustic emission nondestructive testing for most of the industrial equipment. Features： Wireless ...
Transient absence per phase and per group; Permanent absence per phase and per group; Reclosing and Shutdown (per phase); Current surge; Neutral overcurrent; Inverted sensor; Flow inversion; Current (RMS per phase); Module and angle phase ...
The TS200 medium voltage detector is a product designed to detect events that occur in medium voltage electrical networks, up to 34.5 kV. It is a system that monitors the distribution network voltage and current, indicating permanent ...
The TS200 low voltage detector is a product designed to detect the absence/presence of voltage in electrical networks up to 380v phase to phase. It uses a system to read the voltage in the network, which detects the absence/presence of ...
The Thermo-FID ES is a Totalhydrocarbonanalysor in a 19" rack. Burnerair and zerogas are standardised over catalyst. The sample gas conveyance takes place with injectors over the external instrument air. (Leakage control; Exhaust Emission ...
ECO209 is a continuous pH monitor suitable for constant monitoring of pH level of a given water or solution sample such as aquarium tank, ponds, hydroponics systems among others. It is easy to use, with simple maintenance features, ...
Voltage: 60 V - 600 V
The EVA3000 True RMS Digital Measurement Transmitter for all types of AC networks with Modbus or Ethernet output is specially designed for measuring, controlling and transmitting all the parameters of AC electrical networks where speed ...
Voltage: 4 kV - 72 kV
VOLTAGE-ONLY OPTICAL SENSOR OUG135 Voltage: 4kV to 72kV Weight: 4.3 kg (10 lbs.) MICATU OUG135 SENSOR Insulator body rating 15kV BIL: 95kV Optical Cable Length 20ft/(6m) Load-break Elbow Compatibility (Elastimold, Richards, ...
Voltage: 4 kV - 25 kV
NON-CONTACT MEDIUM VOLTAGE SENSOR ONC125 Voltage: 4kV to 25kV Weight: .9 kg (2 lbs) MICATU ONC125 SENSOR Insulator body rating 4kV-25kV Optical Cable Length 10ft/(3m) Accuracy Class: 0.5% Transients: 10dB (10x steady state condition) ...
Voltage: 3 V - 5.5 V
The MLX75305 light-to-voltage SensorEyeC is an easy-to-use light sensor that converts light intensity into an analog output voltage. The sensor is designed for applications like ambient light detection, LCD backlight dimming, LED and ...
The ITEL is designed for use with the catalytic combustible sensor, electrochemical sensor, PID sensor and infrared sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART ...
Macro Technology Instruments Co,. Ltd.
The 6000-KD is designed for use with the catalytic combustible sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART output(option). Using a magnet wand for calibration ...
Macro Technology Instruments Co,. Ltd.
The 6000-KN is designed for use with the catalytic combustible sensor. Features Industry standard Linear 4-20mA output. mV output(option). CNS/CQST/CPA approved for hazardous area use. CE approved for RFI/EMC ...
Macro Technology Instruments Co,. Ltd.
GC-9780b Sulfur hexafluoride equipment discharge decomposition products portable helium ion detector using helium ionization gas chromatography principle,It can analyze 17 decomposition products of sulfur hexafluoride gas such as H2, ...
Detector fitted with a notched insulating end-piece for attaching to an insulating rod. Unipolar electronic detector for checking the absence or presence of the high-voltage. Device designed to be used inside and outside in wet conditions. Voltage ...
Microwave detectors - Ceiling-mounted and tilt adjustable Ceiling mounted microwave sensors with adjustable head option. Ideal for long projection detection such as corridors. Up to 30m detection.
SylSmart Standalone system sensor with wireless radio integrated, Ambient light control and presence detection. Wireless controllable with SylSmart Standalone app on Android / iOS smart device. Forms automatically a wireless communication ...
Auxitrol Weston specializes in the design and development of high quality nickel and platinum Resistance Temperature Detectors (RTDs), in standard and application specific configurations. We are one of the few manufacturers who utilize ...
The World’s First 4D LiDARTM With Camera-Level Resolution Revolutionary 4D LiDAR Technology Leveraging Aeva’s unique Frequency Modulated Continuous Wave (FMCW) 4D technology and the world’s first LiDAR-on-chip silicon photonics design, ...
NON-CONTACT CAN SENSOR SP7001, SP7002 Monitor CAN FD/CAN Signals Without a Sub-Harness Overview The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary ...
DIGITAL PHASE DETECTOR PD3259 Digital Phase Rotation Meter with Three-Phase Voltage Measurement Functionality Overview Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations ...
VOLTAGE DETECTOR 3481 Non-Metallic Contact Voltage Detector with LED Light Overview Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The Hioki 3481 is a pen-style, ...
Voltage: 0 V - 450 V
The DT1600 … AC Voltage Transmitters provide an output signal proportionally with the average value (F) or with the effective value (R) of the input AC-current, AC-voltage signal. The version marked with R (True RMS) is recommended ...
Voltage: 0 V - 450 V
The DT1622 … Loop powered AC Voltage Transmitters provide an output signal (4-20 mA) proportionally with the TRMS value of the input AC-current, AC-voltage signal. The device is two wire transmitters without power supply. They are loop ...
Applications Amplification of pulse and AC light signals Receiver for through beam and reflection light barriers with background suppression (sunlight) e.g. for presence detection in power operated gates, doors and windows etc. Features Fast ...
Voltage: 0 V - 60 V
TSV200 is a galvanic isolated 1-Wire voltage sensor with 0 to 60 VDC working range and IP30 protection. TSV200 is 1-Wire voltage sensor with digital output and galvanic isolated input. It provides a low-cost option for DC voltage monitoring. ...
TSL200 is a 1-Wire ambient light sensor with 83000 lux working range and IP30 protection. TSL200 is a 1-Wire ambient light sensor with high dynamic range and resolution. The dynamic range of 83000 lux guaranties precise measurements ...
TSV100 is an AC voltage detector with galvanic isolation and IP30 protection. TSV100 is an AC voltage detector with optoisolated open collector output. It detects voltage in two ranges – from 85 to 250 VAC (default) and from 170 to 250 ...
The revolutionary and affordable multispectral sensor The Parrot Sequoia+ multispectral sensor is revolutionising the sector, offering a comprehensive, adaptable solution that is compatible with all types of drones. With its two sensors, ...
Ingeniuosly simple Operation With PlanAssistant, everybody can measure or stake out professionally. A short briefing is sufficient and previous knowledge in surveying is not required! Graphical Display As a matter of principle, layouts ...
Universal transmitter Input for RTD, TC, Ohm, potentiometer, mA and V 2-wire supply > 16 V FM-approved for installation in Div. 2 Output for current and voltage Universal AC or DC supply Advanced features ...
PR ELECTRONICS
Play detector for vehicles over 3,5to. | Meets all current guidelines of the european directive 2014/45//EU Scope of Delivery: Hot galvanized left and right Testing plate Max. Axle load 16 to. low maintenance design Radio remote ...
AC voltage detector (non contact) with buzzer and LED Model SEFRAM12 - AC Voltage detector (V>100V AC) - No contact - Phase detector - Autotest - Hi sensitivity mode - Light and beeper indicator - Safety: ...
Connect directly to any XR440 or XR5-SE Data Logger. Also connects directly to any recorder or data acquisition system that has a 0-5vdc input. No external power required. Self powered Rugged polyamide DIN mount case Designed for industrial ...
Pace Scientific
for use as UV-C monitoring system (displaying UV values in "W/m²", "mW/cm²" or "%") can be connected with - up to two D-SiC UV-sensors with digital interface - or one SiC-I UV-sensor with 4-20 mA signal output - or one SiC UV-sensor ...
ARC SEAM SENSING - PRECISION WELDING OF FILLET AND V-SEAMS During the welding process arc seam sensing is used to compensate for positional tolerances of the welding seam. By means of a special software and specifically designed hardware, ...
Please specify:
Help us improve:
remaining