Miscellaneous sensors

Static sensor holder for permanent installation of Ø12mm/120mm-sensors on welding sockets DN25 in tanks or pipelines. The armatures are very easy to install and can be delivered with or without a sensor protection cage. The sensors used, ...

Static sensor holder for permanent installation of Ø12mm/120mm-sensors on tanks or pipelines by TriClamp process connection. The armatures are very easy to install and can be delivered with or without a sensor protection cage. The sensors ...

Static sensor holder for permanent installation of Ø12mm/120mm-sensors on tanks or pipelines by hygienic process connections. The armatures are very easy to install and can be delivered with or without a sensor protection cage. The sensors ...

The ITEL is designed for use with the catalytic combustible sensor, electrochemical sensor, PID sensor and infrared sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART ...

The 6000-KD is designed for use with the catalytic combustible sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART output(option). Using a magnet wand for calibration ...

The 6000-KN is designed for use with the catalytic combustible sensor. Features Industry standard Linear 4-20mA output. mV output(option). CNS/CQST/CPA approved for hazardous area use. CE approved for RFI/EMC ...

The OMD-351-O2 online oxygen monitor combines a rugged CE marked wall mount design with SSO2’s precision oxygen sensor technology. The unit is designed to safely measure breathing air oxygen in confined spaces. The unit comes with a ...

The OMD-351-O2-CO2 online dual oxygen and carbon dioxide monitor combines a rugged CE marked wall mount design with SSO2’s precision sensor technology. The unit is designed to safely measure breathing air oxygen and carbon dioxide in ...

The MED-19 portable oxygen monitor combines a modern rugged CE marked design with Southland Sensing’s precision oxygen sensor technology. The unit is specifically designed to safely and easily verify oxygen and other medical gases used ...

The BAK-Q80 and BAK-Q60 from Aplisens are control devices that secure and monitor fuel fillers in the fuel tanks of power units. The devices are also suitable for managing and monitoring fuel filler access on trucks, machinery, and ...

The Velmex "TA" system is specifically designed for the researcher to perform non-contact measurement analysis. Since it's introduction, the Velmex "TA" system has been the standard of North America's Dendrological Research Community. ...

RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive ...

RA-915AMNG monitors are designed for continuous mercury measurements in a natural gas stream and are ideal for permanent unattended installation at the gas monitoring stations. RA-915AMNG monitor for natural gas allows direct rapid analysis ...

CRAB is an easy-to-operate, active oil slicks optical detector. The instrument detects the presence of oil using optical sensing with a vertical laser beam and measuring the differences in the reflection properties of water and oil products. The ...

With corrosion an extremely costly and disruptive worldwide problem, preventative determination becomes essential. For newly constructed tanks, pipelines and other installations, where corrosion prevention coatings have had to be applies, ...

DURPARK CO and NO2 detectors communicate using a proprietary protocol through three wires with the DURPARK control panel, allowing them to be addressed (1-16). They are specially designed for use in car parks, with a new type of electrochemical ...

DURPARK CO and NO2 detectors communicate using a proprietary protocol through three wires with the DURPARK control panel, allowing them to be addressed (1-16). They are specially designed for use in car parks, with a new type of electrochemical ...

DURPARK RS485 detectors for CO and NO2 communicate through four wires with the DURGAS control panel, allowing them to be addressed (1-16). They are specially designed for use in car parks, with a new type of electrochemical sensor ...

Multifunctional detector probe and measuring device Outstanding benefits: Reliable gas leak detection spillage detection indoor climate measurement contactless temperature measurement measurement of carbon ...

The 8401 installs in place of an IEPE accelerometer (or other sensor) and accepts signals from a voltage function generator. This allows the user to verify signal conditioning settings and cable integrity, the 8401 uses the power from ...

The TDC1-PIR traffic detector is a highly accurate traffic counter with radar-like speed accuracy, length based vehicle classification and ultra-low power consumption. It has been specifically designed for applications where both power ...

The TDC2 Series are advanced traffic detectors using Passive Infrared (PIR) and Ultrasonic (US) technology. Vehicle events (count) and distance (height) are provided via RS 485 databus, additional true-presence is available via dry contact ...

The TDC3 Series is a family of advanced traffic detectors using Doppler radar, ultrasound and passive infrared. Comprehensive traffic data for each passed vehicle, including individual vehicle class, speed, length, occupancy time and ...

Illuminance is the most frequently made measurement within general and specialist lighting applications. The two most important qualities required of a high precision illuminance detector are a spectral responsivity that is very well ...

The VL-3704 is a reasonably priced illuminance measurement head whose photometric responsivity and cosine field of view correspond to the DIN 5032 - Article 7 quality class B. The detector can be combined with all optometers and light ...

The VL-3705 is an illuminance measurement head whose scotopic responsivity and cosine field of view correspond to the DIN 5032 - Article 7 quality class B. The detector can be combined with all optometers and light meters from Gigahertz-Optik. ...

Task Limit switches, which are operated by cams attached to the moving part of the machine, are frequently used for easy po-sition detection of linear or rotary movements in machines and systems. In this case ...

This universal unit is used for the safe double sheet metal detection of non-ferrous sheet metals. Its applications include both non-contact and single surface contact measurement, as well as for double surface non-contact measurement. ...

The sturdy detection unit has been conceived for safe double sheet metal detection of ferrous- and non-ferrous sheet metals for the single surface contact measurement. The system comprises of an evulation device (BDK-ET) and up to 2 ...

This flooding detector allows an extremely precise control of the level of liquid. The system is based on measurement of the conductivity of the liquid to be detected and works with low potential and with alternating currents, in order ...

RMD-5T is a complex detector that can detect five elements of fire such as flame, temperature, humidity, smoke and human bodies to prevent a fire on early. •The High Sensitivity of Smoke Detector Fast Response ability embodies Early ...

The DA100 is a "SMART" gas detector designed to detect and monitor flammable gases in the air in the range of 0-100% LEL using Catalyst Cell technology. The DA100 is an intelligent electronic device that applies Rezontech's unique ...

The DB100 is a "SMART" gas detector designed to detect and monitor toxic (CO, H2S, HCI, etc.), oxygen, and VOC gases in the air by applying electrochemical, galvanic, and PID sensors. The DB100 is an intelligent electronic device that ...

The Microdust Pro is a real-time hand-held, data logging instrument for the detection of airborne dusts, fumes and aerosols. It is ideal for walk-through surveys and for checking the effectiveness of control measures. It is a simple to ...

The device innovation GMS 4000 is the universal device for leak detection, network control and gas analysis. With infrared measurement technology, the measuring instrument can determine natural gas and CO2 exactly and without cross-sensitivities. ...

The innovative device GM 3100 is the universal gas measurement device for leak detection and gas pipeline network inspections. With infrared measuring technology, the gas measurement instrument can determine natural gas and CO2 precisely ...

With the GM 5, Schütz Messtechnik offers a gas measurement device with which all gas network inspection tasks can be carried out precisely and reliably. The graphic menu navigation enables simple, yet safe operation of the device. According ...