... Fault simulator for use with comprehensive testers available with a three pin plug attached or bare wire connection. The simulator allows checking of Hipot, Earth Bond and Insulation Resistance functions Fault Simulation – What is it and why should ...
... Electronic pedal sensor modules comprise an accelerator pedal, angle sensor and mechanics for simulating the traditional feeling of the accelerator pedal for the driver. When the accelerator pedal is presseddown, the pedal sensor transmits the information ...
... Overview
- 4-channel premium thermopile for measurement of carbon compounds at high CO2 concentrations
Key facts
- High detectivity: up to 6.27*10^8 cm√Hz/W with krypton-filled TO housing
- High sensitivity:
... Short description
The MH Multipass 3,9 - 4 channel pyro is a quad-channel high-precision gas cell that significantly increases sensitivity in non-dispersive infrared gas analysis (NDIR). Based on a Herriott configuration, the optical path in ...
... Description
The NDIRsim app is a browser-based simulation tool for the development and optimization of NDIR sensors. No installation or administrator rights are required. Based on the Beer–Lambert law and the HITRAN database, the app enables ...
... Overview
A portable sensor simulator for rapid inspection of vibration measurement systems, sensors, cables and connectors. It produces stable test signals to verify that vibration meters and analyzers measure correctly.
Key functions
- Simulates
Voltage: 48 V - 1,500 V
... Product
MS-927-ET resistive low-voltage detector with 360° LED indication and continuity test.
Overview
- Resistive low-voltage detector with 360° visible LED display for clear indication.
- Designed for absence-of-voltage
... Shaft copying system – absolute positioning of the elevator car. LEB02 is an extremely robust, compact and contactless measuring system. With a resolution of 1 mm and a travel speed of up to 8 m/s, absolute position values of the elevator car are determined ...
KÜBLER GmbH
... Shaft copy system – safe and absolute positioning of the elevator car. The sensor Ants LES02 is an extremely robust, compact and contactless measuring system. With a resolution of 0.5 mm and a travel speed of up to 12 m/s, absolute position values ...
KÜBLER GmbH
... Shaft copy system – Realization of elevator and safety functions. The PSU02 is combined with the Ants LES02 sensor to realize elevator and safety functions in compliance with EN81-20/-21/-50. The Ants LES02 measures the absolute car position 100% slip-free. ...
KÜBLER GmbH
... RELATIVE MEASUREMENTS FROM 0.1 TO 30 THZ Broadband, room temperature operation, easier to use and less expensive than a Golay cell EASY TO INTEGRATE FORMAT TO5 and TO8 packages make the QS-THZ detectors small and easy to integrate in an existing ...
Gentec Electro-Optics
... RELATIVE MEASUREMENTS FROM 0.1 TO 30 THZ Broadband, room temperature operation, easier to use and less expensive than a Golay cell EASY TO INTEGRATE FORMAT TO5 and TO8 packages make the QS-THZ detectors small and easy to integrate in an existing ...
Gentec Electro-Optics
... DESIGNED FOR INTEGRATION With a broad bandwidth and high power densities VERY THIN PROFILES Starting at only 2 mm in thickness VARIOUS APERTURE SIZES Choose your aperture from 10 mm to 55 mm. 2 LEVELS OF INTEGRATION • Disk alone • Disk + ...
Gentec Electro-Optics
... Short description
- Installation on machine or within a control panel
- Operable individually or interconnected via internal bus for power and RS‑485 (Modbus) communication
- I/O module for data acquisition systems (DAS), PC-based
... Overview
The ePlane is a complete high-performance multi-pressure simulator for Ps, Pt and AoA. It is used for pitot-static tester demonstrations and training without any risk to onboard equipment. The ePlane consists of an aluminium casing, ...
... The PD6014-40 is composed of two wires, and an AC power switch. The vibration-proof unit utilizes a voltage range of 110 up to 220 V AC. The device functions in a power capacity of 3 A to 110 V AC. In addition, it provides a break angle of 40° ± 5°. Specifications 2 ...
The Comus Group
... The PD6021 model, engineered by Comus, is an inductive proximity switch that features a 2 wire design. In addition, this device runs on an utmost current of 1A and on a voltage range from 6~30 VDC. Specifications 2 Wires DC Proximity Switch Voltage ...
The Comus Group
... Contact Capacity: 1.0 A, 120 VAC Operation: 90º Tilt w/ arrow toward the front, contact is open Break Angle: 45º Against Horizontal ABS Plastic Housing ...
The Comus Group
... Item No.: VX8100 Product name: Flash Measuring Machine Image Senor: 20M CMOS Field of view：W130mm×L20mm & W200mm×L100mm Depth of Field: 3mm & 30mm Working Distance: 120mm Accuracy: ±2μm(Without stitching) & ±5μm(Without stitching) Resolution: ...
Chotest Technology Inc.
... Automatic video measuring machines CHT series covers different measurement ranges offers powerful functionality and can perform precise measurements of surface dimensions, contours, angles, positions, and geometric tolerances for various complex parts. Automatic ...
Chotest Technology Inc.
... Automatic video measuring machines CHT series covers different measurement ranges offers powerful functionality and can perform precise measurements of surface dimensions, contours, angles, positions, and geometric tolerances for various complex parts. Automatic ...
Chotest Technology Inc.
The Universal X1-IS-UNI-01 module is a high integrity interface suitable for applications requiring SIL 3 or SIL 2 level (depending on applications) in safety related systems for high risk industries. Thanks to its high flexibility, it can interface 2-wire ...
The Universal X1-NIS-UNI-01 module is a high integrity interface suitable for applications requiring SIL 3 or SIL 2 level (depending on applications) in safety related systems for high risk industries. Thanks to its high flexibility, it can interface ...
... Infralytic is considered to be the most innovative developer and manufacturer in oil layer thickness measurement technology. Our more than 20 years of know-how lies in the non-contact measurement of oil film layers on steel and aluminum. The inline ...
... Each Dataforth 5B module provides a single channel of isolated analog input or output. - Input modules interface to all types of external sensors, then filter, isolate, amplify, and convert the input signals to high-level analog voltage outputs - ...
Dataforth Corporation
The SCM5B48 provides excitation to piezoelectric sensors with built-in microelectronic amplifiers, commonly known as ICP®* or IEPE* or LIVM* sensors. The module provides a constant current excitation to the sensor, then isolates, filters, and amplifies ...
Dataforth Corporation
The SCM5B48 provides excitation to piezoelectric sensors with built-in microelectronic amplifiers, commonly known as ICP®* or IEPE* or LIVM* sensors. The module provides a constant current excitation to the sensor, then isolates, filters, and amplifies ...
Dataforth Corporation
... NT-D transmitter is user configurable with the New-Flow software and interface cable URC-1020 or handheld programmer. The New-Flow is user-friendly software. The latest release version can be download free from website. Interface cable consist of interface ...
TEST-4 is a valuable tool for calibration sessions, laboratory tests, and simulation of analog measurements controlled by industrial devices (PLCs, controllers, data acquisition systems, etc…). With an overall accuracy of less than 0.1%, a resolution ...
... 3DGipsumB. The system for gypsum boards dimensional measurement Turn-key solution on the base of 2D laser scanners and point triangulation sensors for continuous contactless measurement of gypsum boards geometrical parameters. Measured parameters: • ...
... The esf-1 fork sensor can detect labels reliably even at high label speeds. Highlights 3 Teach-in methods for the detection of labels even outside the standard Response time < 300 µs: for use at high web speeds Housing in fork format with very compact ...
... esp-4: Label and splice sensor compact in a single unit, optionally with M12 sensor heads. Highlights 3 Teach-in methods to be able to configure the sensor individually for any task Response time < 300 µs for use at high web and label speeds QuickTeach ...
... •DC signal conditioning mounted in line on cable •Outputs ±5V, ±10V, 0-5V, 0-10V •Inputs ±15V, 12V or 24V Analogue probes can be ordered with an In-line Conditioning Module that is calibrated at the Solartron factory, providing ease of setup. The ...
... Conditioning Electronics •OD Series Boxed conditioning •DRC Din Rail Conditioning •IN Line Conditioning ...
Capacitec’s thin capacitive sensors are single sided very thin stick-on GPS and HPS sensors that provide the thinnest packaged capacitive sensor elements available in the market today. They are available in temperature ranges from -100°C to 260°C. GPS ...
... HPD/GPD (double sided) Thin Gap Sensor Wand HPD Series sensors are typically 0.394” (10mm) wide by a 3.94” to 7.87” (100 to 200mm) long. These double-sided wands are typically used in conjunction with the Gapman or Slot Die Coating System. Gapman wands ...
... Description
Static probe housing for permanent installation of Ø12 mm/120 mm sensors on welding sockets G1 1/4" (DN25) in tanks or pipelines. Easy to install; available with or without sensor protection cage. Glass sensors and other sensor types ...
Exner Process Equipment GmbH
... Product overview
Static probe housing for permanent installation of Ø12 mm / 120 mm sensors on tanks or pipelines via TriClamp process connection. Easy to install; available with or without sensor protection cage. Particularly suitable to protect ...
Exner Process Equipment GmbH
... Product description
Static probe housing for permanent installation of Ø12 mm / 120 mm sensors on tanks or pipelines via hygienic process connections. Suitable for sensors with PG13.5 thread; available with or without a sensor protection cage. ...
Exner Process Equipment GmbH
... Overview
Transmitter only; gauge not included. The WiMER2 is a wireless transmitter for Fowler/Sylvac digital instruments with RS232 output. It reads measurement data from compatible micrometers, calipers and indicators, powers the connected ...
Motionics, LLC
... Product overview
WiMER5 is a universal wireless transmitter for optical and magnetic encoders with 90° phase-shift differential square-wave (RS422/TTL) outputs. The device provides a 5 V supply to the encoder, decodes A and B quadrature signals ...
Motionics, LLC
... Overview
WiMER4D is a wireless transmitter dongle for the Mitutoyo digital protractor 950-318. When paired with the 950-318, measurements can be viewed and collected wirelessly on iPhone, iPad, Android devices and Windows PCs. WiMER4D is available ...
Motionics, LLC
PSS01 is the circuit breaker simulator，which can conduct circuit breaker simulation to test the whole secondary relay scheme together with relay test set. It is very good accessory for protection relay test kit to avoid complicated software programming ...
PONOVO POWER CO., LTD
PAS Series Switching-mode 4-Quadrant Power Amplifier (Hereinafter referred to as PAS Series) is the important equipment used for PHIL (Power Hardware in Loop) solution, which can be vastly used for different industry application, such as electrical power ...
PONOVO POWER CO., LTD
The digital real-time simulation technology is widely used in the power system. Different digital simulation system is developed such as RTDS, OPAL-RT, NI, Tynphoon, etc. But no matter how the digital simulation or digital-analog model simulation changes, ...
PONOVO POWER CO., LTD
The FAA Hybrid III 50M Dummy is an FTSS modification of the Hybrid III 50th percentile male automotive crash test dummy developed by General Motors, anthropometrically based on the height and weight of a 50th percentile dummy for adult American males. ...
... The 15.6" / 39.5 cm projected capacitive (PCAP) touchscreen sensor features a durable, practically wear-free glass surface that supports gesture control and up to 10 simultaneous touch points. The controller and connection cable are included in the delivery. This ...
WES Systeme Electronic GmbH
The 15" / 38.1 cm projected capacitive (PCAP) touchscreen sensor features a durable, virtually wear-free glass surface that supports gesture recognition and multi-touch operation with up to 10 touch points. The controller and connection cable are included ...
WES Systeme Electronic GmbH
The 19" / 48.3 cm projected capacitive (PCAP) touchscreen sensor offers a durable, virtually wear-free glass surface that enables intuitive gesture control and multi-touch operation with up to 10 touch points. The controller and connection cable are included ...
WES Systeme Electronic GmbH