Other position, speed and acceleration measurement equipment

The 3086A1 by Dytran Instruments is a shock sensor which is designed to measure severe shocks and other extreme short duration events. It comes with an IEPE accelerometer which enables it to cover a high natural frequency by about 100 kHz. An operation ...

... Brodersen's UDC-32 is a digital panel controller with 4 digit LED display. The panel meter is used for monitoring and measurement oF • AC/DC voltage • AC/DC current • Temperature with PT-100/500/1000, Ni-100, Thermistors and thermocouples. The ...

... The BMR3000 can apply to high heading accuracy request ,0.2° heading accuracy Heading Accuracy 0.2° Resolution N/A Broad temperature range -40℃～+85℃ MTBF ≥90000 hours Protection class IP67 If garbled characters appear on this manual ...

30 seconds fast alignment MEMS north seeking system Introduction ER-MNS-04A/B fast alignment north seeker adopts the latest MEMS gyro technology, breaking through the volume and performance limitations of traditional directional equipment, compressing ...

Range: 0.1 m - 60 m

... Benefits METRON 60 BT Bluetooth interface for the SOLA Measures app "Share" feature for fast transmission of measurement results Suitable for indoor and outdoor use 3-line backlit display Applications METRON 60 BT Length ...

Wireless laser sensors for short distances facilitate non-contact monitoring of all movements. This makes sense, for example, with large load carriers (LLC) which are so heavy that they would subject other sensors to an unacceptable level of wear and ...

Range: 0.2 m - 120 m

... 4X zoom camera with viewfinder Photo of the measured point with measurement memory Video and voice recording with memo Wireless data trasmission Dual digital inclinometer (horizontal and vertical) Continuous measurem ent function, with max / min ...

... Velmex VRO™ Delivers Ultra-Precise Position Readouts The Velmex VRO Digital Readout delivers precise position information generate by linear or rotary incremental encoders. This compact, microprocessor uses the latest OLED display and DSP micro-controller ...

Digital magnetic tape measurement systems by Magnescale (formerly SONY Precision Technology) consist of a linear magnetic material and a reading head, which is fed without contact over the magnetic tape. This measuring principle is permanently wear-free, ...

Range: 2 m - 2,500 m
Precision: 20 mm

The RIEGL Lasertape is a multipurpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations even under ...

... Sensors from the RadarRanger® series detect objects at distances of up to 100 m. The adjustment of the particular range needed is carried out in 1 metre steps. This value corresponds to the resolution of RadarRanger®. Depending on the model, the sensors ...

... Dual Antenna RTK INS Ellipse-D is the smallest Inertial Navigation System integrating a Dual-antenna, multi-band GNSS receiver, capable of delivering precise heading as well as centimeter level position accuracy in the most challenging GNSS conditions. It ...

The NS-432 is a portable mine intrinsically safe instrument that can quickly measure azimuth and inclination. The device can measure the true north Angle of the carrier at rest, and the measurementerror is lessthan 0.8°.lt has the function of autonomous ...

The Tempatron MINISENSOR4-MCU analogue controllers are twin setpoint, dual output units for 4-20mA or 0-10Vdc input signals from temperature, pressure, humidity, flow, velocity or position sensors. Alternatively, two open collector or voltage free contact ...

Digital PIR sensor RDA223-F, is an integrated design of sensitive element and signal processing chip, packaged sensitive element and IC chip into sensor shield. Sensitive element transfer the human movement signal to high-precision digital chip by differential ...

... The WM-531 Shaft Hand Control is built for a range of off-highway applications. The unit is designed for remote installation and mechanical interface with a throttle position sensor. It is infinitely variable between 0° and 54° with applicable uses ...

Smartrek’s Ultrasonic Sensor is an incredibly accurate sensor that uses sound waves to measure distances. It is highly sought after for applications such as motion sensing, environmental monitoring, and industrial automation due to its exceptional precision. ...

... Gocator® 3500 high-resolution structured light 3D snapshot sensors bring metrology-grade performance to the inline factory environment. • Fast scan rate (6 Hz with PC or GoMax NX accelerator) • 5-megapixel stereo camera minimizes occlusions • Now with ...

Measuring range: 2 mm
Process temperature: -25 °C - 75 °C

... Inductive proximity switches based on the eddy current principle react to all metals. The proximity switches in the ZT 3xx - 4xx series have a metal outer plate. They are adjusted and fastened via the external thread (M5-M18). Typical application: ...

Process temperature: -25 °C - 70 °C

The CNPS-BC Pump Punch Speed Sensor is an inductive proximity switch sensor used in the oil field to measure pump or turntable speed. It has a wide range of power supply voltage, high repeatability, fast frequency response, long service life, vibration ...

... There are collision hazards everywhere in the company. Be it due to overly high masts when driving through gateways or high volumes of people and traffic in certain areas, with NoColl, you can protect people and machines and at the same time safeguard ...

... Scanning of both sides from platform. Scanners move with the extension deck providing continued protection front of the platform. • Eye Safe Laser Class • IP67 Outdoor Rating • Detects Metals or Composites • Includes Over-Ride Button or Unlock Key • ...

...  Peak to Peak Shaft Vibration Measurement.  Direct 4-20mA loop powered output.  Dynamic signal output  Switch selectable system cable lengths 5m, 7m and 9m.  Double screened cable for high noise immunity.  Snap lock and shake proof cable connection.  ...

... is our latest anti-collision and zoning system for lifting machines Certified PLd and SIL-2 according to the standards EN13849-1 and EN61508 ANTI-COLLISION The device calculates in real time and in 3D the distances between each elements of the cranes ...

... RackEye is a cutting-edge, data-led solution that transforms how you see your warehouse facilities. Using smart sensor technology, racking health data is captured in real-time, alerting you the moment an impact occurs. Live dashboards offer instant ...

... We specialise in the design and manufacture of tilt switches for a wide range of applications. These accurately measure angle and activate a relay when a pre-set threshold is reached. They use a solid state precision sensor to measure angle, and are ...

... Special version - Multiplex operation Synchronous operation Teach input MTTF - 411 years Operating range - 0.015 ... 0.5 m Ultrasonic frequency - 200 kHz Shape of sound lobe - standard Direction of beam - Front Opening angle - 3 ... 11 ...

The Gyro HG 84300ZC measures the angle of one axis and permanently outputs this angle via its CAN/CANopen® interface (in the future also PROFINET). This information can be used by a superordinate vehicle controller (not part of the scope of supply; e.g. ...

Range: 0.3 m - 35 m

The distance is measured by steering the laser beam vertically and horizontally. In 1 frame, a point cloud with 2590 points is generated. It is possible to increase the point cloud density using the interlacing mode. This scanner is equipped with an acceleration ...

... ⊙ Power Supply：DC3V - ⊙ Communication protocol： TUYA zigbee ⊙ Transmission Distance： >100m - ⊙ Mesure the light sensitivity ⊙ Sensitivie angle:120° - ⊙ App：Tuya,Android和IOS ⊙ Work together with other devices after setting linkage scene on smart ...

... General purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Sealed to IP67 with industry standard two-wire 4-20mA output proportional to sensor ...

Designed thanks to Magnetic experience in the d.c. motor field, tachogenerators are speed transducers with 4 poles excitation and ALNICO permanent magnets. Available with 3 kind of standard windings of 20, 40 or 60V referred to 1000 rpm, tachogenerators ...

The focusing sensor head M12/F40 is used for standard applications, e.g. for measuring vibrations or material deformations. Because of the larger lense's diameter, it enables a quite high angular tolerance of ±0.35°. The housing is designed for high stability ...

Incremental encoder résolution (pulses per revolution: 50 unit - 4,000 unit
Shaft diameter: 4 mm - 8 mm

... Encoder for BLDC Motor Optical Incremental Type Options •different attachment diameters ...

Measuring range: 5 mm - 20 mm

... Features: ·Optional Normal Open or Normal Close ·Optional shielded or non-shielded ·EMC GB14048.10 ·Short-circuit protection ·Polarity-reversing protection ·Enclosure protection degree IP67 Specifications: Operating voltage　　　　　　 10 ～ 36VDC -------------------------------------------------------------------------------- Operating ...

... The PowerBeam 300 is a parabolic accessory originally designed to test high voltage insulators and transformers from a safe distance with a high degree of accuracy. The PowerBeam 300 can accurately pinpoint sources of ultrasound within 1 degree off target ...

... System description ■ - Explosion-proof grade I Exd II CT6 ■ - two-wire system Integrated design ...

• Solution for linear measurement : Designed to equip machine tables and special linear measurement systems, The ruler is fixed on a table, and the unit displays the exact linear distance traveled between point A and point B. Available in 150, 200, 300 ...

... Highlights - • - Industrial Grade IoT Motion Detection Sensor • - Configurable Detection Frequency/Sensitivity • - Uses Interrupts for Motion detection with very little power consumption • - Measuring range: 5 meter • - Custom Detection Range ...