... Parker's RM50 tilt switches detect angular movement in a single axis. They are designed using reed switch technology and no moving external components making them very robust and well suited for applications where mercury (Hg) cannot be used. Parker's ...
... Dynamic roll and pitch accuracy 0.03° RMS (+/- 5°) Dynamic roll and pitch accuracy 0.05° RMS (+/- 30°) Heave accuray ±5cm or 5% Solid state solution with either 3000m or 6000m depth rated housing High dynamic accuracy during vessel turns Independently ...
Teledyne Marine
... PD-54N Measuring Range 0.05m~40m Measuring Precision(Typical) ±1,5mm Laser Class II Laser Type 620-690 nm,<1mW Type Indoor Operation Temperature -ior ~+50*c Selectable Datum Side • Area • Pythagoras • Volume • Plus/minus ...
South Surveying & Mapping Instrument Co., Ltd
... This position indicator type HMC-3C is applied with motor drive units of CAM7 and CMA9 (hereinafter referred as MDU) of on-load tap changer, and it can display the actual position of tap changer, there are three buttons "1-N", "stop" ...
Length: 0 mm - 15,000 mm
... Draw-wire encoders are widely used in industrial automation, robotics and other areas where precise position measurements are required. They essentially consist of a wire, the spring mechanism, the encoder, the coil and the surrounding housing If the ...
W+S Meßsysteme GmbH
Length: 0 mm - 1,250 mm
Output frequency: 300 kHz
Process temperature: -20 °C - 80 °C
... Draw-wire encoders are widely used in industrial automation, robotics and other areas where precise position measurements are required. They essentially consist of a wire, the spring mechanism, the encoder, the coil and the surrounding housing If the ...
W+S Meßsysteme GmbH
Length: 0 mm - 1,500 mm
Output frequency: 100 kHz
Process temperature: -20 °C - 85 °C
... Draw-wire encoders are widely used in industrial automation, robotics and other areas where precise position measurements are required. They essentially consist of a wire, the spring mechanism, the encoder, the coil and the surrounding housing If the ...
W+S Meßsysteme GmbH
... Description
Non-contact coded electronic sensor to monitor the position of miniature doors and guards on hazardous machinery. Designed to work with the AWAX controller for complete safety management. Suitable as an economical solution for multi-access ...
COMITRONIC - BTI
... Product overview
The AMX5/D40 is a stand-alone safety switch designed for mounting on 40 mm profiles used in industrial guarding and access control. It provides tamper‑proof mono-code detection in a stainless steel hygienic housing for applications ...
COMITRONIC - BTI
... Product description
EPINUS-4K-MKT-HY - Safety sensor with magnetic hold 4 kg specially designed for the food industry with hygiene design.
Features
- Hygienic design with sloped housing faces and no cavities to prevent
COMITRONIC - BTI
... Product summary
HCM380B / HCM385B-MP is a cost-effective 3D electronic compass combining a three-axis magnetometer and a three-axis accelerometer. It implements a 24-point magnetic calibration method and high-precision accelerometer-based tilt ...
SHENZHEN RION TECHNOLOGY CO.,LTD
... Product description
The HCM370B / HCM375B-N is a compact, high-precision 3D electronic compass providing reliable heading data with 0.5° accuracy and 0.1° resolution. It integrates a three-axis magnetic sensor and a three-axis accelerometer ...
SHENZHEN RION TECHNOLOGY CO.,LTD
... HIGH ACCURACY 3D DIGITAL COMPASS SENSOR ▶ MAIN FEATURE ★ Heading Accuracy: 0.5° ★ Roll Measure Range:±180° ★ Tilt Resolution: 0.1° ★ Tilt Accuracy: <0.2°(Full Range) ★ Working Temp.: -40℃~+85℃ ...
SHENZHEN RION TECHNOLOGY CO.,LTD
... 2 AXES INCLINATION SWITCH (± 60°) with 2 on/off static outputs Insensitive to shock and vibrations • Self teaching of zero position and threshold • Low power • High thermal stability • General features: These sensors give two NPN normally open outputs ...
... 2 AXES INCLINATION SWITCH (± 60°) with 2 on/off static outputs High thermal stability • Rugged anodized aluminum housing • Low power • Insensitive to shock and vibrations • General features: These sensors give two NPN normally open outputs which ...
... One-axis digital readout, with 6 ½ digit LCD and negative sign. Metal sensor body of small overall dimensions. Fixing of magnetic sensor by existing threaded holes M4 or by M3 through screws. Power supply either via battery or external. Flexible cable ...
GIVI MISURE
MAGNETIC RING made of a magnetized ferrite ring with pole pitch of 2+2 mm or 5+5 mm, mounted on an aluminium flange for an easy application on the machine.
GIVI MISURE
... Compact-design, single-axis digital readout, equipped with the new Absolute Warning System (AWS). AWS constantly guarantees the correctness of the displayed positions and informs the operator of any malfunctioning. The user can continue machining or, ...
GIVI MISURE
The Touchswitch from 4B is a mechanical belt and pulley misalignment sensor. It detects tracking and misalignment on bucket elevators and conveyors. The sensors can be connected directly to a PLC input, or for greater safety, to a central independent ...
4B Braime Components
Measuring range: 6 mm - 12 mm
Process temperature: -10 °C - 70 °C
... The P800 Proxswitch is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object presence. Product Features • - Detects the presence of metallic objects in hazardous areas such as handling, storage, packaging, conveying, ...
4B Braime Components
Process temperature: -15 °C - 50 °C
... Detects the presence or absence of materials. Is used for monitoring the speed of machinery via a speed module or PLC. Product Features • Detects the presence of metallic objects in dangerous conditions such as in handling, warehousing, packaging, ...
4B Braime Components
... The IRIS Tilt Switch and Controller is a powerful tilt control device with advanced firmware features. The on-board electrolytic tilt sensor is sensitive to <0.002°. User programmable settings include AUTO-zero (tare), sample averaging, hysteresis control, ...
Jewell Instruments
... The ECV eCompass Series provides stable azimuth, pitch, and roll measurements in dynamic conditions. An enhanced version of our ECG Series, the ECV includes a full suite of precision, 3-axis, MEMS sensors and an optional dual-axis electrolytic tilt sensor, ...
Jewell Instruments
The ECL low power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all types ...
Jewell Instruments
... Overview
The ASC RAIL-2711 is a uniaxial industrial analog gyroscope engineered for rail and other harsh-environment applications. It delivers stable angular rate measurement with design features that simplify integration into rolling stock ...
ASC
... Overview
The ASC IMU 7-LN is a 6 DOF analog inertial measurement unit combining capacitive and vibrating ring sensor technologies. It provides separate analog voltage outputs for each degree of freedom, uses LN (Low Noise) accelerometers and ...
ASC
... Overview
The ASC IMU 7-MF is a 6-DOF inertial measurement unit (analog) providing separate analog voltage outputs for all six degrees of freedom. Built on MEMS accelerometers and MF (vibrating-ring) accelerometer technology combined with industrial-grade ...
ASC
There are several materials and surface finishes available for this product, including polyamide six, which is used for housing and provides impact resistance. The grub screw steel and counter dial are major advantages, while the digital position indicators ...
... Position indicator quasi-absolute, mains-independent, indicator accuracy 10 µm, small design Material: Housing plastic. Screen LCD display. Version: Position indicator with integrated battery compartment. Plug-in sensor. Low-power LCD. Note: Digital, ...
... Bullseye levels in frame, to screw on Material: Frame brass. Bullseye level body polyamide. Version: Nickel-plated and high-gloss polished. Note: Bubble levels are used as a type of zero indicator instrument for checking horizontal inclination in e.g. ...
... Digital indicator for incremental encoders or sensor signals DX350: HTL inputs (A, B), 3 control inputs DX355: Functions equal to DX350 but with 2 incremental HTL / RS422 control inputs. Input frequency up to 1 MHz and a switchable encoder supply ...
motrona
... Digital indicator for incremental encoders or sensor signals DX355: Functions equal to DX350 but with 2 incremental HTL / RS422 control inputs. Input frequency up to 1 MHz and a switchable encoder supply of 5 / 24 VDC DX350: HTL inputs (A, B), 3 control ...
motrona
... touchMATRIX® SSI Indicator for Absolute Encoders IX350: 3 control inputs, 24 VDC encoder supply IX355: Features like IX350 but with wire break monitoring of the SSI data line (except SSI clock). Switchable encoder supply of 5 / 24 VDC. Can only be ...
motrona
... Vane type, with a groove width of 14mm or 24mm. Switching by vane passing through the groove. ■Product model list PSMO-15G1 PSMO-15G2 PSMO-15G2S PSMO-15G1T PSMO-15G2T PSMO-25G1 PSMO-25G1T PSMO-25G2 PSMO-25G2T ...
BESTACT SOLUTIONS INC.
... Vane type, with a groove width of 25mm. Switching by vane passing through the groove. ■Product model list PSMO-25E1 PSMO-25E1/P PSMO-25E2 PSMO-25E2/P PSMO-25E1T PSMO-25E2T ...
BESTACT SOLUTIONS INC.
Process temperature: -25 °C - 130 °C
... Vane type suitable for high temperatures, with a groove width of 25mm. Switching by vane passing through the groove. ■Product model list PSMO-25E1TH PSMO-25E2TH ...
BESTACT SOLUTIONS INC.
... THE NON-CONTACT ENCODER PROSPEED (no distance sensor!) Precise speed and length measurements are critical for production control of continuous materials, sheet materials and piece goods. ProSpeed – the next generation LSV Laser Surface Velocimeters ...
Incremental encoder résolution (pulses per revolution: 1 unit - 25 unit
Housing diameter: 80 mm - 85 mm
Process temperature: -40 °C - 120 °C
... Ranges from 1000 to 3000 mm Linearity max. ±0.02 % Output analog 0...10 V, 4...20 mA, Potentiometer Output digital TTL, HTL, SSI, Profibus, CANopen, DeviceNet, Ethercat, Profinet Protection class IP65 (optional IP67) ...
WayCon Positionsmesstechnik GmbH
... Key-Features: - Measurement ranges up to 1250 mm - Cost effective non-contacting absolute encoder - Analog output: 4...20 mA, 0...10 V - Teachable resolution - IP68 - Self-diagnostics on tape distance & integrity - Operating temperature range from ...
WayCon Positionsmesstechnik GmbH
... Key-Features: - Measurement ranges up to 100 m - Sine-Cosine 1Vpp real-time output (MXW) - HTL or TTL output (MXI) - Unaffected by dust, debris or liquids, IP67 - Hi-flex cable - High performance encoder for linear motors - Operating temperature ...
WayCon Positionsmesstechnik GmbH
The BDK Duo Flex by Klaschka Industrieelektronik is a double sheet sensor which is designed for supervising the automated transports of sheet metal plates. Using this tool, it avoids expensive tool damage and downtime during production. This unit is known ...
Measuring range: 20, 10 mm
Process temperature: -25 °C - 75 °C
... Inductive proximity switches for industry and automation Good value for money Sensors With smooth plastic sleeve Customer-specific adaptations For the detection of metallic objects, position and movement monitoring, object counting and speed control ...
EGE-Elektronik Spezial-Sensoren GmbH
Measuring range: 2 mm - 15 mm
Process temperature: -25 °C - 75 °C
... Inductive proximity switches resistant against electromagnetic interference which might arise from cables or radiation. For use in systems with challenging EMC conditions Customer-specific adaptations For the detection of metallic objects, position ...
EGE-Elektronik Spezial-Sensoren GmbH
Measuring range: 2 mm - 10 mm
Process temperature: -25 °C - 80 °C
... IGV solid stainless steel sensors For high mechanical stress One piece from stainless steel Especially impact-proof Resistant to vibration and shock For use under harsh mechanical conditions Inductive proximity switches for use in the mobile machinery ...
EGE-Elektronik Spezial-Sensoren GmbH
... Absolute vibration transmitter IP65 SS316 body with onboard 2 pin connector for machinery online monitoring The integrated vibration transmitter TR-26 measures the absolute vibrations of any rotating machine support The transmitter is made of an AISI ...
CEMB
... Absolute vibration transmitter IP68 - SS316 body with intgrated cable Wide range of operation allows the application on any tipology of rotating machine (as fans, compressors , centrifuges , turbines) Operation range TR-27 monitors vibration of the ...
CEMB
... Explosion-proof vibration transmitter The integrated transmitter TR-I measures the absolute vibrations of any rotating machine support and it is able to interface directly in 2 wires technique (current loop 4 ÷ 20 mA) to an acquisition system. The ...
CEMB
The PCH EtherBridge for IoT is part of PCH Engineerings modular condition monitoring system, PCH Link Concept. The IoT-ready communication module enables you to connect your PCH 1420 vibration monitor to PCH Cloud and deliver vibration and process data ...
... • DIN rail digital AC Ammeter, 3 DIN modules • DIN rail digital TRMS AC Ammeter, 3 DIN modules • DIN rail digital AC Voltmeter, 3 DIN modules Modular digital indicator - 3 DIN modules Voltmeter for alternating current. • DIN rail digital TRMS AC Voltmeter, ...
FRER
... - AC digital Ammeter, 48x48 - TRMS AC digital Ammeter, 48x48 - AC digital Voltmeter, 48x48 - Digital Frequency meter, 48x48 - DC digital Ammeter, 48x48 - DC digital Voltmeter, 48x48 - Digital indicator for DC inputs from transducers (4-20mA - 5mA ...
FRER
... - AC digital Ammeter, 72x36 - TRMS AC digital Ammeter, 72x36 - AC digital Voltmeter, 72x36 - TRMS digital Voltmeter, 72x36 - Digital Frequency meter, 72x36 - DC digital Ammeter, 72x36 - DC digital Voltmeter, 72x36 - Digital indicator for DC inputs ...
FRER
Housing diameter: 60 mm
Length: 107 mm
... Draw wire encoder - suitable for the harshest environments. With its extremely robust design, the high protection class IP69k and the wide temperature range up to -40 °C ... +85 °C the draw-wire encoders C60 are specially developed for outdoor applications. Their ...
KÜBLER GmbH
... Draw-wire encoder - economical and innovative. The draw wire system C100 is more than a sensor for determining length-related position data. Variants with integrated inclinometer and redundant interfaces offer versatile application possibilities. The ...
KÜBLER GmbH
Housing diameter: 124 mm
Length: 94 m
... Draw-wire encoders – economical and innovative. The draw wire system D125 is more than a sensor for determining length-related position data. Variants with integrated inclinometer and redundant interfaces offer versatile application possibilities. The ...
KÜBLER GmbH
Comus International presents AG1240-0 tilt and tip-over switches. The switches are compliant with RoHS. They have a Normally Open contact form. Their switching voltage is maximum 60V, switching current is maximum 0.25A, and switching capacity is maximum ...
The Comus Group
... RoHS COMPLIANT Contact Form: Normally Open Switching Voltage: 60V Max. Switching Current: 0.25A Max. Switching Capacity: 3VA Max. Operating Angle: 40° ± 10° Max. Contact Resistance: 100 Ohms Max. Operating Temperature: -38° +100° C Size: Over ...
The Comus Group
... RoHS COMPLIANT Contact Form: Normally Open Switching Voltage: 60V Max. Switching Current: 0.25A Max. Switching Capacity: 3VA Max. Operating Angle: 40° ± 10° Max. Contact Resistance: 100 Ohms Max. Operating Temperature: -38° +100° C Size: Over ...
The Comus Group