Other position, speed and acceleration measurement equipment

... M18 external thread installation, the longest shell length is 55mm. Ultrasonic sensor with small appearance and cost performance in 1 m measuring range. ♦ The shell is 45/55mm sériés, and elbow models are provided correspondingly. ♦ Switch output/analog ...

... Open-type sensors are classified into 3 types: transmitter, reciever. It features wide measuring range and strong anti-interference ability. Open type sensors are mainly used in car alarm devices, distance measuring device and remote control system. Features - ...

Rotational speed: 120 rpm
Output frequency: 200 kHz

RA-1 Angle Encoder is especially developed by PMT Technologies for high-precision encoder market. It is mainly used for high-precision Angle measurement and its required accuracy is within a few arc seconds.

... enerSENSE wireless building sensors for measuring occupancy (enerSense IR-Array) and air quality (enerSense CO₂) indoors. Power is supplied by our proprietary indoor photovoltaic technology. Easy installation without battery replacement. LoRaWAN communication ...

ZCT215L-SQS-A1G-4007 is a new generation cost-effective dual axis tilt switch researched and developed by ZC Technology. This product is based on the 32-bit high-performance microprocessor, which is calibrated to the zero deviation and sensitivity deviation ...

Process temperature: -10 °C - 70 °C

Magnetic proximity switch is the general term of sensors， which replaces limit switch and other contact detection methods and aims at conducting detection without contact with the detection object. It can detect the move and existence information of the ...

... The signaling box transmits electrical position information. FUNCTION: The signaling box transmits electrical position information. MOUNTING: On actuators with an intermediate support – Complies with VDI / VDE 3845 (NAMUR). WATERPROOFING: IP ...

... • INS, AHRS and ADC (Air Data Computer) output data • Multi frequency and Multi constellations GNSS Receiver • GPS, GLONASS, GALILEO, QZSS and BEIDOU GNSS • Designed for fixed-wing and multi-rotor Aerial Platforms • Two Barometers for Indicated Airspeed • ...

... Built-in Rectifier Bridge Thanks to the built-in rectifier bridge, the device can be powered with both AC or DC power supply without any error. Low Voltage Glow Protection To avoid the risk of unexpected and random switch-ons, the device will be ...

... ToughSonic 3 Ultrasonic Sensor Features Short range — small housings Short deadband at 1.75 in (44 mm) Very narrow beam at close range Indoor or outdoor uses Straight or tapered thread options Two outputs plus serial data ...

... TACTIGON ONE (V.1) is a wearable board, programmable with Arduino IDE, specifically designed for precise 3D gesture control, motion capture, GPS tracking, and vibration measurements. TACTIGON ONE (V.1) is a sophisticated wearable board specifically ...

The i-box is the smallest limit switch box in our product range. It is especially suitable for applications in narrow places with little space and also for assembly on small actuators with 80x30 mm hole spacing with 20 or 300 mm long shafts. Thanks to ...

Process temperature: -40 °C - 85 °C

... ASX is a contact-less magnetic absolute encoder series featuring high operation speed employed in harsh environments such as, automation and process control fields. Can Open redundant output is available. ASX provide a unique digital code for each ...

Auxitrol Weston manufactures the finest quality analogue indicators and has the ability to build, repair and overhaul all OEM products, with accompanying accreditations. Pedigree dating back over 80 years in analogue instrumentation has produced modular ...

USB-302 linear Scale Exchanger is a new type of equipment of reading and exchanging linear scale data. It can link three linear scales and one footswitch. It will lock the three-axis data in the moment when footswitch pedal or the RI point of linear scale ...

... Risolution: 1 - 5 - 10 micron Axes: X - Y - Z - W GENIUS digital read-out, for milling and boring machines, has a large LCD display to visualize the part. It also displays a guide to the programming of complex work cycles, such as holes on circle ...

... LASER Distance Meters are used for the precise measurement of distances and posizions up to three kilometers. Laser Distance Sensors for long measuring ranges and millimeter accuracy. Distance meters or rangefinders are a popular application for laser ...

... Graphical menu navigation Device with measurement and temperature input Input 1: variable measurements Input 2: temperature Input 3: external stop Scope of supply DOSAControl DCW 105, standard connection cable 5m, IP 54 housing, 144 x 144 x 83 ...

... 2-wire loop powered transmitter for Radial Shaft Vibration Does not require proximity probe driver 4-20mA output Buffered output/ GAP Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm) Powered by DCS/PLC directly The TR4101 ...

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This ...

... Two-channel quadrature with optional index Improved replacement for HEDS-9000 Series Single 5 VDC supply Resolutions from 32 to 2,500 CPR Internal decoupling capacitor Sink/source 8mA outputs Product Description The EM1 is a transmissive optical ...

... Clear cutting ruler 30cm is easy to look at the material to cut. Thickness of 5mm. Stainless steel edge for easy cutting. Packing - Transparent bag Size(mm) - 60×372×6 Weight(g) - 84 ...

... 2 or 5 mm pole pitches ± 40µm, accuracy Self adhesive magnetic tapes Industrial standart dimensions 10 mm x 1,5 mm IP 67 protection ...

Measuring range: 1 mm

... 4mm smooth inductive proximity sensor Ultra-mini inductive proximity sensor Available in N. O. Or N. C., NPN or PNP 10-30VDC operating voltage Attached 2 meter cable Quick disconnect models available Pigtail (0.3m cable with M8 connector) ...

... Features Valve position feedback — 0° up to 359° Precisely measures valve shaft rotary movement Works on powered or manually driven valve shafts Retains valve position in the event of a power loss Interface with PLC or use the optional PM500 Process ...

Singer Valve's X156 Linear Inductive Valve Position Transmitter has a stainless steel actuator which is directly pinned unto the main valve stem. The stems on the main valves are far more larger than 2 1/2 in / 65 mm and are drilled specifically for fast ...

... Position indicator IFM-IN5225 Inductive sensor Electrical design DC PNP, with LEDs Output: DPST (2 x n.o.) Operating voltage: 10...36V DC Current rating: 250mA Switching function: DPST DC PNP Protection class: IP67 M12 ...

The PD Flowmeter is a valve position indicator manufactured by Oval. Designed as a small-sized flowmeter, it can be found attached to the hydraulic line of a hydraulic instrument. Additionally, it has an indicator and flowmeter accuracy ranging within ...

VITECTOR‘s RAY-NC introduces the next generation of Non-Contact Edges. Due to its smart, selfadjusting software RAY-NC adapts to its environment making it work independently from the door design. The sensor reliably detects every type of reflection, which ...

Measuring range: 1 mm - 30 mm
Process temperature: -30 °C - 130 °C

Magnetic proximity switch is mainly composed of sensors and triggers. Sensor part is connected by the reed pipe through a lead and sealed; Trigger part may be the magnet of corresponding magnetic field strength encapsulated in the plastic or alloy housing, ...

... 9 axis wireless motion sensor ZMP® IMU - Z2 & SDK Sold more than 1000 units since 2014. Definitive, ultimate version of motion sensor for research (IMU,acceleration sensor) Reason why IMU-Z2 is kept to be chosen · Flexible sensor configuration (wired ...

... -Counter with lower and upper limit values -Programmable initial position (Reset) -Counting speed up to 5 KHz -Bidirectional counting and encoder -Counting with scale factor -Configurable inputs NPN and PNP -Supply voltage ... 24 VDC; 24 VAC; ...

The IS3F series devices, synthesis and result of the continuous BTSR research activities, are electronic sensors specifically designed to detect and control, thanks to a sophisticated patented control technique (bi-dimensional analysis with optical lens/ceramic), ...

... 'Drop-in', low-cost single-axis MEMS gyros Key features CRS43 High performance single axis MEMS gyroscope 5th generation VSG technology Dynamic Range ±100°/s and ±200°/s 4.75 to 5.25V supply Wide operating temperature range -40°C to +85°C Excellent ...

The first anti-collision system for VNA (very narrow aisles) forklifts, includes optimized installation and maintenance costs, which you can manage independently with different intervention modes (stop, slowdown, alarm) and which also works out of aisle, ...

... Ultrasonic Barrier Output: 1 x PNP, NO Interface: - Connection: Cable 2m Adjustment Setpoint: - Housing: R50, PBT Features: High switch frequency, barrier ...

... MICROWAVE MOTION SENSOR Wide coverage area Sharp, adjustable detection field Directional settings Easy to install DESCRIPTION The HAWK 2 utilizes K-band microwave technology to detect people and vehicles from an overhead position. It provides ...

The PREXISO P20 laser measure is the simplest way of measuring. Thanks to its laser precision technology and continuous measurement mode, it takes instant and reliable measurements up to 20M/65 Ft. The laser measure is simple to operate, so users need ...

Housing diameter: 58 mm
Length: 1,000 mm

... General Features •Measurement length up to 1000 mm •Robust aluminum housing •Very compact design •Protection to IP54 •Wire actuated encoder for all rotary encoders with 58 mm servo flange and different signal outputs •Stainless steel wire Flange ...

The IP67 rated HRXL-MaxSonar-WR ultrasonic rangefinders offer 1mm resolution, 2.7-5.5VDC operation, a narrow beam pattern, high power output, noise rejection, automatic calibration, and temperature compensation. The output options for this ultrasonic ...