Other position, speed and acceleration measurement equipment

Housing diameter: 22 mm
Shaft diameter: 6 mm
Length: max 34.9 mm

WLH22D Series 1-turn Contactless Potentiometer (Patented) - Magnetic rotary sensor - Low cost version - Plastic housing case - Bushingmount - Solder pads - Housing diameter Φ22mm - Single output, Dual parallel output, ...

Housing diameter: 22 mm
Shaft diameter: 6 mm
Length: 33.9 mm

WLH22E Series 1-turn Contactless Potentiometer (Patented) - Magnetic rotary sensor - Low cost version - Plastic housing case - Bushingmount - Housing diameter Φ22mm - Output direction: Clockwise (W), Counterclockwise (C) - ...

Flange size: 48 mm
Housing diameter: 28 mm
Shaft diameter: 6 mm

WDH28F Series 1-turn Contactless Potentiometer (Patented) - Magnetic rotary sensor - Flangemount - Connector as optional - Housing diameter Φ28mm - Single output, Dual parallel output, Dual cross output - Output direction: ...

Magnetically actuated proximity switches for providing volt-free changeover contacts allowing the switches to be wired either normally open or normally closed. The switch indicates at a local and/or remote alarm that the shower is ...

New NGO3-W measuring head for contact free water film measurement in moving processes. Companies are facing rising demands to improve their energy balance. The rolling of slabs requires a lot of energy. After the rolling process, the ...

RC351XA8 is an indoor ceiling mount PIR sensor, it brings energy saving and automatic lighting control intelligently to home and office with ease and comfort.

TC351XA8 is a in-wall passive infrared sensor (PIR), it brings energy saving and automatic lighting control intelligently to home and office with ease and comfort.

TS351XA5 is a in-wall passive infrared sensor (PIR), it brings energy saving and automatic lighting control intelligently to home and office with ease and comfort.

The steering sensors from ds automation are characterized by a direct and backlash-free steering feel and are therefore an important prerequisite for safe and precise work. DS steering sensors operate magnetically without contact directly ...

The Touchswitch from 4B is a mechanical belt and pulley misalignment sensor. It detects tracking and misalignment on bucket elevators and conveyors. The sensors can be connected directly to a PLC input, or for greater safety, to a central ...

Measuring range: 6 mm - 12 mm
Process temperature: -10 °C - 70 °C

The P800 Proxswitch is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object presence. Product Features • - Detects the presence of metallic objects in hazardous areas such as handling, storage, ...

Process temperature: -15 °C - 50 °C

Detects the presence or absence of materials. Is used for monitoring the speed of machinery via a speed module or PLC. Product Features • Detects the presence of metallic objects in dangerous conditions such as in handling, warehousing, ...

Dual Antenna RTK INS Ellipse-D is the smallest Inertial Navigation System integrating a Dual-antenna, multi-band GNSS receiver, capable of delivering precise heading as well as centimeter level position accuracy in the most challenging ...

Compact & Robust Ellipse-A is an affordable and high-performance Attitude and Heading Reference System (AHRS). It embeds a best-in-class magnetic calibration procedure for optimal heading, and is suitable for low to medium dynamic ...

External GNSS for Navigation Ellipse-E is a versatile miniature Inertial Navigation Sensor that connects to external GNSS receiver to provide navigation data, and other sensors such as DVL or odometer. It is best suited in case ...

Controls the position of hazardous machine doors/cases with integrated self-checking Contactless coded sensor with electronic technology and relays IP68 PA6 / IP69K INOX316L Performance level and category without external controller: ...

SSR - Safety Switch stand alone - Cat.1 Position control for doors / casings on hazardous machinery Contactless encoded electronic sensor with relay Up to 8 zone differentiation codes Safety contacts 2A / 250V Level of performance ...

Cylindrical safety Switch Position control for low-play doors / casings on hazardous machinery Contactless encoded electronic sensor with relay Category 1 total safety management without an external controller according to EN954-1 According ...

The Semelex is a self-contained, portable, multi-purpose diagnostic system for industrial press room automation and operator safety device analysis. The Semelex can quickly calculate machinery stopping time and determine the minimum safe ...

The BMR3000 can apply to high heading accuracy request ,0.2° heading accuracy Heading Accuracy 0.2° Resolution N/A Broad temperature range -40℃～+85℃ MTBF ≥90000 hours Protection class IP67 If garbled characters appear ...

BW-IMU1400 is a fiber optic gyro inertial measurement unit with high reliability,which can measure the angular velocity and acceleration velocity of the moving carrier. The acceleration and angular velocity deviations are estimated by ...

BW-IMU700 is a large measuring range high-performance inertial measurement unit, which can measure the motion parameters (angular velocity, acceleration) of the carrier. BW-IMU700 uses highly reliable MEMS accelerometers and gyroscopes, ...

Digital PIR sensor RDA223-F, is an integrated design of sensitive element and signal processing chip, packaged sensitive element and IC chip into sensor shield. Sensitive element transfer the human movement signal to high-precision digital ...

Digital PIR sensor RDA-226, is an integrated design of sensitive element and signal processing chip, packaged sensitive element and IC chip into sensor shield. Sensitive element transfer the human movement signal to high-precision digital ...

ZRD-09 Pyroelectric infrared sensor module adopts high performance PIR sensor, Fresnel lens, Pyroelectric dedicated chip and High-performance voltage regulator circuit. It has the features, as low static power consumption, wide operating ...

The Trilas TL is a unit manufactured by Delta company. It is a laser triangulation measurement that is digital with high resolution that have sensor for measurement of dimensional data. It is an autonomous sensor mounted in a cast aluminium ...

* High Accuracy * Measurement on target up to 1200 °C / 2190 °F * Non-Contact, no slippage * Design for steel industry conditions Features and benefits The Velas DL4000-N directly replaces traditional, high-maintenance, problematic ...

Length: 33 mm
Width: 15 mm
Process temperature: -20 °C - 70 °C

• Contact: N.O. - N.C. • Assembly: on rear side, with screw, with bracket • Casing material: Polyamide • Magnetic switches

Length: 33 mm
Width: 13 mm
Measuring range: 14 mm

• Dimensions: 33x13x8mm • Operating temperature: -20+70 °C • Contact: N.O. - N.C. • Mounting: from above, with bracket • Body material: Polyamide • Center of sensitive area: reed, T = 14 mm

Length: 38 mm
Width: 11 mm
Measuring range: 14 mm

• Dimensions: 38x11x8 mm • Contact: N.O. - N.C. - SWITCH • Assembly: on rear side, with bracket • Casing material: Polyamide • Centre of the sensitive area: reed, T = 14 mm

Wire transducers series WDS are composed by the wire mechanical draw-wire system coupled to Elap absolute multiturn encoder MEM520-Bus or MEM520. They can provide different communication interfaces: EtherNet/IP, EtherCAT, Profinet, ...

Wire transducers series WPS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, ...

This item is mostly popular for the fact that it is able to display direct current, voltage and frequency information. There are versions with two relay outputs available, while the display range is four digits, with or without indication, ...

The IRIS Tilt Switch and Controller is a powerful tilt control device with advanced firmware features. The on-board electrolytic tilt sensor is sensitive to <0.002°. User programmable settings include AUTO-zero (tare), sample averaging, ...

The ECV eCompass Series provides stable azimuth, pitch, and roll measurements in dynamic conditions. An enhanced version of our ECG Series, the ECV includes a full suite of precision, 3-axis, MEMS sensors and an optional dual-axis electrolytic ...

The ECL low power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading ...

Process temperature: 0 °C - 70 °C

• Dimensions: M4 x 22 mm • Switching function normally open (NO) • Connection: free cable end Electrical properties Operating voltage 10 … 30 VDC Maximal current consumption 10 mA Load current 200 mA Dynamical properties Frequency 3 ...

• Dimensions: ø 6.5 x 60 mm • Switching function normally open (NO)

Range: 2 m - 2,500 m
Precision: 20 mm

The RIEGL Lasertape is a multipurpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations ...

Range: 1 m - 1,100 m

The RIEGL LD05e-HT is a multi-purpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations ...

Range: 2 m - 2,400 m
Precision: 12 mm

The RIEGL LD05 is a multi-purpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations ...

Comus International presents AG1240-0 tilt and tip-over switches. The switches are compliant with RoHS. They have a Normally Open contact form. Their switching voltage is maximum 60V, switching current is maximum 0.25A, and switching ...

RoHS COMPLIANT Contact Form: Normally Open Switching Voltage: 60V Max. Switching Current: 0.25A Max. Switching Capacity: 3VA Max. Operating Angle: 40° ± 10° Max. Contact Resistance: 100 Ohms Max. Operating Temperature: -38° +100° ...

RoHS COMPLIANT Contact Form: Normally Open Switching Voltage: 60V Max. Switching Current: 0.25A Max. Switching Capacity: 3VA Max. Operating Angle: 40° ± 10° Max. Contact Resistance: 100 Ohms Max. Operating Temperature: -38° +100° ...

Housing diameter: 152 mm

is a range of robust metrology-grade encoders that are compatible for industrial applications. They integrate four reading heads to abolish usual sources of encoder faults. They are made up of stainless steel making it able to withstand ...

Housing diameter: 203 mm

angle encoders are durable encoders of metrology-grade. These are equally useful for different industrial applications. It integrates four reading heads to reduce the common errors of the encoders. The unit features stainless steel construction ...

F.lli Rotondi has an internal R&D lab specialized in designing and manufacturing high-precision scales, reticles and photomasks – essential tools for the correct calibration of measuring machines. This is our core business, and we can ...

Optical scales are a type of linear encoder. Explained in the simplest terms, an optical scale is a graduated strip, on which measurement marks are set with an extreme level of precision at definite intervals. While operating, an optical ...

CoriSENS 24V12 CoriSENS is a rotation rate sensor for measuring angular velocity ω. It detects rotational movements using a MEMS gyroscope. This measuring signal in a range of ± 12° / s is converted by the sensor electronics and transmittes ...

CoriSENS 110V7 CoriSENS is a rotation rate sensor for measuring angular velocity ω. It detects rotational movements using a MEMS gyroscope. This measuring signal in a range of ± 7° / s is converted by the sensor electronics and transmittes ...

CoriSENS 110V20 CoriSENS is a rotation rate sensor for measuring angular velocity ω. It detects rotational movements using a MEMS gyroscope. This measuring signal in a range of ± 20° / s is converted by the sensor electronics and transmittes ...

Robust, permanently excited tacho generator for measuring the speed of the application shaft Suitable for larger industrial drives Solid shafts (flange or foot mounting), hollow shafts (hollow shaft type tacho generator or A4: two-piece ...