Flow: 220 m³/h
Pressure: 16 bar
Head: 140 m
PROLAC HCP is a range of close-coupled centrifugal pumps with hygienic design, compact and highly efficient. It is made of a cold-formed stainless steel casing, impeller, mechanical seal, pump ...
INOXPA
Flow: 9 m³/h - 87 m³/h
Pressure: 20, 18, 16 bar
Fluid temperature: -20 °C - 140 °C
... is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values. It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be ...
INOXPA
Flow: 11.5 m³/h - 110 m³/h
Pressure: 10, 12, 8, 6 bar
Fluid temperature: -20 °C - 140 °C
... screw pump, with sanitary design, suitable for use in the dairy, food and beverage, cosmetics, etc. The flow is uniform and in an axial direction, so there are no changes of volume or physical properties of the product. ...
INOXPA
Pressure: 300 bar
Fluid temperature: -25 °C - 60 °C
The Electric Barrel Pump can easily operate with all styles of lubrication systems including progressive, injector, direct, and even dualine. AC or DC Electric Barrel Pumps will replace the air or hydraulic ...
Flow: 9 l/min - 125 l/min
Head: 0 m - 10.5 m
Power: 38 W - 260 W
... sulphuric acid, can be pumped. Three different impeller sizes are available depending on liquid and power requirement. The pumps are all with thread connection, either NPT1/2" or NPT1".
Flow: 10 l/min - 86 l/min
Head: 2.4 m - 14.3 m
Power: 22 W - 365 W
Supreme reliable, compact mag. drive pump With 6 models of PVDF the MD/-F series is completed. So electrolysis applications and alkaline baths for ambitious surface treatment can be covered now. Due ...
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...
Zaklady Automatyki POLNA S.A.
Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 65.8 l/min
Pressure: 35 bar
Power: 5.5 ch
Electric motor pump assembly. AR 50 BlueFlex™ ET 4 poles. Integrated control unit (GI 40).
Flow: 0.6 l/h - 1,200 l/h
Pressure: 6, 12, 18, 24 bar
Power: 0.37 kW - 1.1 kW
... The JESSBERGER high viscosity dosing pumps are supplied as standard with either a for operation with frequency inverter drive suitable gear motor or with an adjustable manually control gear motor. The pumps ...
Flow: 6 m³/h - 75 m³/h
Head: 7.2 m - 38 m
Fluid temperature: 95, 65 °C
... -840 series offers several pump sizes with flow rates from 6 to 75 m³/h and head from 7,2 to 38 m. Their special construction with an open-impeller allows even the pumping of extremely dirty liquids or media containing ...
Flow: 6 m³/h - 75 m³/h
Fluid temperature: 95, 65 °C
... emptying containers or tanks. Centrifugal pumps of series JP-820 will be mainly used for fixed installations while the pump column is immersed directly in the tank. The special construction of these ...
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...
Flow: 0 m³/h - 450 m³/h
Head: 0 m - 100 m
Power: 4, 3 kW
Standardized centrifugal pumps type NB are single-stage horizontally mounted pumps. They are characterized by a maintenance-friendly design and can be used in a wide variety of applications. 18 sizes ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 42 m³/h
Head: 0 m - 42 m
Power: 4, 3 kW
Multistage high pressure centrifugal pumps type ZHB are horizontally mounted pumps. They are characterized by a minimum space requirement. Optionally, this series can be equipped with two or three pressure ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 120 m³/h
Head: 0 m - 58 m
Power: 4, 3 kW
... centrifugal pumps of the series SM are single-stage horizontally mounted pumps. Because of their robust and durable design the SM pumps can be used in a wide variety of applications. ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0.1 m³/h - 6,700 m³/h
Pressure: 16 bar
Head: 0.1 m - 3.5 m
Wet-installed horizontal propeller pump with submersible motor, equipped with direct drive or spur gear, ECB propeller with rigid, fibre-repellent blades, bolt-free connection to the discharge pipe. Explosion-proof version ...
KSB
Flow: 8.4 m³/h
Head: 90 m
Power: 1.5 kW
The new 5” monobloc borehole pumps from the EASYWELL family. Its stainless steel structure gives the E5MX resistant to corrosion. Technopolymer impellers and diffusers ensure high resistance to sand. The electric motor ...
Flow: 11 m³/h - 225 m³/h
Pressure: 20 bar
Power: 0.18, 0.25 kW
The metering pumps ST-P series are driven by an electric motor, the dosage takes place thanks to a piston. The ST-P series pumps make their robustness and reliability their main characteristic. • ...
Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m
Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling corrosive, aggressive and hazardous ...
CDR Pompe
Flow: 0 m³/h - 7 m³/h
Head: 0 m - 8.5 m
Power: 0.37, 0.25 kW
DM 06 magnetic drive centrifugal pumps are succesfully suitable for many different application fields such as: laboratory technique, medical equipments, photo processors, x rays film processors, laser beam systems, metal ...
DEBEM SRL
Flow: 1 l/s - 90 l/s
Head: 2 m - 30 m
Power: 5 kW - 18 kW
... products range (about 856 among pumps and mixers) includes different models according to a variety of models,from 0,5 kW to 350 kW, 2-4-6-8-10-12 poles (50Hz and 60 Hz). CONSTRUCTION DATA Submersible electric pumps, ...
FAGGIOLATI PUMPS
Flow: 0 m³/h - 144 m³/h
Pressure: 10 bar
Power: 2.2 kW - 11 kW
... are Monobloc electric pump units with standard EN 733 (ex DIN 24255) stainless steel pump AISI 304 and single pump-motor shaft. This range fulfils the hydraulic field included in the ...
Bombas Ideal
Flow: 4, 8, 16 m³/h
Pressure: 16, 21, 23 bar
Power: 0.37 kW - 18.5 kW
... series pumps are efficient operation, low noise, compact structure, light weight, easy to service, good seal performance etc. Its high head low-capacity performance range makes it especially suitable ...
Flow: 700 l/min
Power: 2.5 kW
For conveying diesel, heating oil EL or biodiesel.
Flow: 0 m³/h - 12 m³/h
Head: 90 m
Power: 1, 3 ch
Our single pump booster sets increase and supply constant pressure for cold water installations where pressure provided by the mains supply or feed tank is insufficient. Example installations include; domestic properties, ...
North Ridge Pumps Ltd
Flow: 54 m³/h - 324 m³/h
Head: 16 m - 35 m
Power: 2.2 kW - 22 kW
Submersible electric pumps suitable for the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids. Owing to their maneuverability they can be easily moved.
Flow: 17 m³/h
Head: 0 m - 22 m
Power: 2,100, 1,700 W
... drainage installation in polyethylene or concrete manholes as grinder pump on sewage lifting units Scope of delivery pump with 10 m power cable all pumps without ...
zehnder pumpen
Flow: 0 l/min - 0.0217 l/min
Fluid temperature: 5 °C - 40 °C
Length: 280 mm
... interruption. 2. In flow rate mode, the pump remains running or stop according to the setting parameters when power returns - Protection Function: The pump will stall and give an alarm when the drive ...
Flow: 0 m³/h - 156 m³/h
Head: 0 m - 100 m
Power: 1.5 kW - 11 kW
The pump casing shall have material of construction of Cast Iron FG 260 (standard supply), Bronze LTB2, CF8, CF8M, axial suction and radial discharge port, dynamically balanced impeller, steel shaft, stainless steel shaft ...
LUBI INDUSTRIES LLP
Flow: 0 m³/h - 10.8 m³/h
Head: 20 m - 92.5 m
Power: 0.55 kW - 5.5 kW
... chemically pure liquids and free of foreign matters, with temperatures not higher than 80°C. PUMP: Horizontal axis pump with bronze closed impeller, pump body and base support made ...
Conforto
Flow: 0 m³/h - 54 m³/h
Head: 0 m - 16 m
Power: 0.5 kW - 2.6 kW
... control can be connected. Maximum cable length of the pumps is 10 m. 3-phase pumps with level control (US 151 DS, US 152 DS and US 251 DS) have a CEE-Plug with phase inverter. The sewage pumps ...
JUNG PUMPEN
Flow: 10 l/min - 150 l/min
Pressure: 7 bar
Head: 15 m - 62 m
Self-priming horizontal multistage stainless steel pump suitable for domestic use, also in combination with autoclave tanks. Suitable for irrigation, drinking water or glycol distribution, water treatment, heating and ...
Pentax Pumps
Please specify:
Help us improve:
remaining