400 V pumps

Flow: 0.85 l/min - 50 l/min
Pressure: 20 bar - 50 bar
Head: 1,000 mm

... positive-displacement pumps with fixed displacement and high efficiency. They are suitable for a variety of applications, such as hydraulic, hydrostatic, cooling as well as oil circulation and total-loss lubrication systems. ...

Flow: 50, 70 l/min
Pressure: 2 bar
Head: 5, 6 m

without shaft seal streamlined housing made of PP or ETFE discharge head of MA pump type 1 is up to 6 mWS horizontal single-stage monoblock design

Flow: 80, 100, 70, 40 l/min
Pressure: 3, 2, 1.5 bar
Head: 15, 10, 7, 8 m

without shaft seal streamlined housing made of PP or ETFE discharge head of MA pump type 2 is up to 8m.Wg, of MA pump type 3 up to 15m.Wg horizontal single-stage monoblock design

Flow: 160, 180, 190, 220 l/min
Pressure: 2.2 bar
Head: 14, 12, 8 m

without shaft seal streamlined housing made of PP or ETFE delivery head of up to 14m.WG back pull-out

Flow: 244 l/s - 281.2 l/s
Head: 1 m - 82.7 m
Power: 3 kW - 45 kW

Cast iron impeller with Molib-tech treatment™ / Chopper sistem able to cut particles of any shape of proportion Liquids containing solid parts and fibres Suitable for sewage, lifting of not strained black water

Flow: 0.06 l/min - 3 l/min
Pressure: 35 bar
Power: 0.44, 0.55, 0.18, 0.25, 0.37 kW

Gear pumps up to 3 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for base mount. ADVANTAGES - Economical through closed circuit - Environment friendly - Function ...

Flow: 0.06 l/min - 3 l/min
Pressure: 35 bar
Power: 0.18, 0.25, 0.37, 0.55 kW

Gear pumps up to 3 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for a sub-base mount. ADVANTAGES - Economical through closed circuit - Environmentally friendly - ...

Flow: 17, 9, 13, 6 l/min
Pressure: 35 bar
Power: 1.5, 0.75, 1.1, 0.55 kW

Gear pumps from 6 to 17 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for a base mount. ADVANTAGES - Economical through closed circuit - Environmentally friendly - ...

Flow: 4 l/h - 1,020 l/h
Pressure: 5 bar - 16 bar
Fluid temperature: 5 °C - 80 °C

... on the crest of the waves The MEMDOS LB is used when the integration of the pump into controls or control circuits is required. Thanks to the sturdy tappet drive with manual or automatic capacity adjustment, ...

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...

Flow: 2 m³/h
Head: 6 m
Power: 0.05 kW

Guaranteed 100% leakproof thanks to the magnetic drive, these pumps are ideal for transferring the most corrosive fluids. Guaranteed leakproof High capacity magnetic coupling Excellent wear resistance Ceramic/ceramic ...

Flow: 3 m³/h
Head: 7 m
Power: 0.12 kW

Guaranteed 100% leakproof thanks to the magnetic drive, these pumps are ideal for transferring the most corrosive fluids. Guaranteed leakproof High capacity magnetic coupling Excellent wear resistance Ceramic/ceramic ...

Flow: 3.5 m³/h
Power: 0.18 kW
Length: 346 mm

Guaranteed 100% leakproof thanks to the magnetic drive, these pumps are ideal for transferring the most corrosive fluids. Guaranteed leakproof High capacity magnetic coupling Excellent wear resistance Ceramic/ceramic ...

Flow: 160, 200 m³/h
Head: 0 m - 30 m
Power: 16.1, 20.2, 28.4 kW

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

Flow: 0 m³/h - 150 m³/h
Head: 0 m - 39 m
Power: 12.8, 10.4, 15.2 kW

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

Flow: 0 m³/h - 150 m³/h
Head: 0 m - 22 m
Power: 8.7, 12.8 kW

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

Flow: 10, 11, 13 l/min
Pressure: 0 bar - 15 bar
Power: 780, 600 W

Internal gear electric pumps for lubricants.motor depending on model, IP-55 protection and on/off switch. Cast iron pump body, sintered steel gears and by-pass valve. Motor with mounting feet, the pump ...

Flow: 13, 11 l/min
Pressure: 15 bar
Power: 780, 600 W

Internal gear electric pumps for lubricants. IP-55 protection and on/off switch. Cast iron pump body, sintered steel gears and by-pass valve. Motor with mounting feet, the pump can be ...

Flow: 25 l/min - 70 l/min
Pressure: 9.5 bar
Power: 750 W - 2,000 W

... external gear pumps directly coupled to an electric motor with IP 55 protection for the transfer or distribution of large volumes of lubricants. Pump gears are manufactured in steel and pump ...

Flow: 3,500, 4,500 l/min
Head: 20, 30 m
Power: 22, 25.3, 37, 41.5 kW

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in ...

Flow: 0 l/min - 500 l/min
Head: 0 m - 250 m
Power: 1.7 kW - 15 kW

Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion ...

Flow: 0 l/min - 550 l/min
Head: 0 m - 255 m
Power: 2.2 kW - 18.5 kW

Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion ...

Flow: 250 l/min - 650 l/min
Head: 11 m - 24 m
Power: 0.37 kW - 3 kW

Selfpriming jet water pumps with a very high hydraulic performance and a considerable capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for water lifting and distribution ...

Flow: 125, 100 l/min
Head: 29, 20, 27 m
Power: 0.75, 0.55, 0.37 kW

Single impeller centrifugal pumps suitable to cover any small, medium or large capacity request; for domestic, agricultural and industrial purposes; with automatic water distribution through small and ...

Flow: 125 l/min - 150 l/min
Head: 36 m - 54 m
Power: 1.1 kW - 2.2 kW

Single impeller centrifugal pumps suitable to cover any small, medium or large capacity request; for domestic, agricultural and industrial purposes; with automatic water distribution through small and ...

Flow: 0.029 l/min - 1.152 l/min
Pressure: 0 bar - 140 bar
Power: 240 W

For industrial production and process technology The micro annular gear pump mzr-11507 is equipped with tungsten carbide rotors and bearings. Hard construction material and precision manufacturing ...

Flow: 0.058 l/min - 1.152 l/min
Pressure: 0 bar - 40 bar
Power: 250 W

Ex-pump for application in chemical and process technology The mzr-11557 Ex micro annular gear pump of the hermetic and chemically inert series is, considering its almost universal ...

Flow: 0.0288 l/min - 1.152 l/min
Pressure: 0 bar - 15 bar
Power: 240 W

Pump for precise filling and dosing technology Micro annular gear pump mzr-11540 of the modular pump series operates with high dynamics, low pulsation and excellent ...

Flow: 2.2 m³/h
Head: 0 m - 20 m
Power: 0.37 kW

Electric diesel pump with turbine at 2800 rpm Descriptive Technical data: Built-in bypass on the pump with single-phase motor Current: 2.5 Orifice Ø: 1" Max. TDH: 20 metres ...

Flow: 2.2 m³/h
Pressure: 2 bar
Head: 0 m - 20 m

Electric diesel pumps with turbine at 2800 rpm Descriptive Technical data: Built-in bypass on the pump with single-phase motor Power: 0.37 Current: 2.5 (JEV10INDUS), 1.1 (JEV11er) ...

Flow: 3.6 m³/h
Head: 0 m - 60 m
Power: 0.75 kW

... advantages: Self-priming open turbine monoblock pump Characteristics More Information Fluid - Diesel Technology - Turbine ATEX - No Pump - Bare Orifice - 1" Materials - Cast-iron Mechanism ...

Flow: 0.00013 m³/min
Pressure: 250 bar
Power: 0.55 kW

... barrel. HANDY barrel lubrication pumps are suitable for progressive lubrication systems and dual-line lubrication systems. Supply voltage 230V/400V 3-phase - 50Hz Flow ...

Flow: 30, 12, 19.5 m³/h
Head: 7 m - 21 m
Power: 0.25, 1.5, 0.75 kW

Pump body is made of rigid stainless steel, that makes it light and portable, and cast iron, for long lasting durability. A semi-open impeller made of high chrome alloy match with wearable plate (ductile iron) achieves ...

Flow: 18 m³/h - 147 m³/h
Head: 11 m - 40 m
Power: 1.5 kW - 11 kW

Tapflo SB is constructed in rigid cast iron Tapflo SB is constructed in rigid cast iron that makes the pump run problem free day after day. The pump has a greatly increased maximum submersion depth due ...

Flow: 18 m³/h - 60 m³/h
Head: 25, 20, 30, 19 m
Power: 2.2, 3.7 kW

... a heavy-duty sludge pump made in cast iron, employing the SB series as its base. On SBA an agitator is provided to assist smooth suction of the pumped fluid. The side-flow, top-discharge design keeps the motor cool even ...

Flow: 0.5 m³/h - 3 m³/h
Head: 20 m - 100 m
Power: 1.3 kW - 3 kW

... MultiPower pumps (4HS MP), powered by renewable energy sources, is a new range coming from the 4HS pumps with built-in inverter. 4HS MultiPower pumps can be powered by AC or DC with ...

Pressure: 300 bar
Fluid temperature: -25 °C - 60 °C

The Electric Barrel Pump can easily operate with all styles of lubrication systems including progressive, injector, direct, and even dualine. AC or DC Electric Barrel Pumps will replace the air or hydraulic ...